Veracity VTN-EXTEND Datasheet

IMAGINATION INNOVATION INTEGRATION DATASHEET
MASTER NTP TIME SERVER
Master NTP reference clock for
Ethernet networks
Accurate, low cost and extremely compact universal GPS-based atomic clock reference for network time synchronisation with POE capability
Supports all NTP compatible devices
Ideal for synchronising DVR, NVR and ACS servers
Ideal for closed or secure networks
Ideal for mobile or vehicle-based applications
Simple browser interface allows fast installation
Wide operating temperature range. GPS antenna included
TIMENET is a low-cost solution for accurately synchronising computer system clocks
TIMENET offers a solution to the problem of providing accurate, reference time signals for any Ethernet network, especially closed networks.
Time Synchronisation
Many network installations require a
reference time signal for synchronising
system clocks to ensure they are always
set precisely to the correct time. For
example, it is crucial that all CCTV
recordings are accurately time-stamped,
especially for evidential purposes.
Most Digital Video Recorder (DVR)
products - especially those which are
PC-based - have inaccurate internal
clocks which can drift by many seconds
per week. Considering that DVR and
NVR systems should run unattended for
months or years, the time settings can
end up being in error by many minutes.
Further, multiple recorders and devices
will drift apart time-wise, reducing the
veracity of evidential data.
Compact Solution
Whilst traditional solutions involve
atomic clock radio receivers or GPS
sensors linked to an expensive rack-
mounted master clock server, TIMENET
integrates the GPS receiver and master
NTP clock server into a compact device
for direct connection to the network.
TIMENET can be wall-mounted, uses very
little power and is less than half the cost
of competing solutions. TIMENET can be
powered over the network by POE, or
locally by a low-voltage power supply.
Browser Interface
TIMENET provides a simple browser
interface for setting up the IP address
and configuration password.
The status tab displays information
such as system up-time, GPS lock, UTC
and local time, plus an extremely useful
satellite signal meter. This meter shows
satellites in view, signal strength and
highlights in green all those with a strong
signal level.
Example 1. A simple browser interface shows the status of the system, with separate tabs for settings and administration.
IMAGINATION INNOVATION INTEGRATION
Loading...
+ 2 hidden pages