Page 1
IMAGINATION INNOVATION INTEGRATION DATASHEET
UNIVERSAL ETHERNET & POE EXTENDER
Power over Ethernet and network
range extender
Power over Ethernet (POE) greatly simplifies the deployment of IP cameras,
wireless access points & equipment more than 100m from network points
Instantly doubles cable range to 200 metres
Extends up to 800 metres with multiple units
No local power required
Full unrestricted network bandwidth
Universal 10/100 compatibility
Extends POE and POE Plus up to 60 watts
Page 2
OUTREACH Max overcomes the
distance limits of POE networks
Simply connecting an OUTREACH Max in line with the network cable instantly
doubles the range from 100 metres to 200 metres (656 ft).
Cable lengths in Ethernet networks are
limited to 100 metres (328 f t), which is
a serious restriction for many security
installations.
OUTREACH Max enables installers to
overcome this network limitation. Simply
connecting an OUTREACH Max in line with
the network cable instantly doubles the
range from 100 to 200 metres (656 f t).
Simple to install
Fitting OUTREACH Max is simple because
no set-up is required. Its only connections
are two RJ45 network ports, both of
which immediately self-configure for 10
or 100BASE-T operation. POE power
is automatically transferred between
connected equipment. No local power
supply connection is needed, because
OUTREACH Max is powered by POE.
OUTREACH Max can easily be located
anywhere along the network cable,
as long as no single length of cable is
greater than 100 metres. For example,
to extend the network connection
between a POE switch and an IP camera
to 170 metres, an OUTREACH Max
could be installed 90 metres from the
switch. A further 80 metres of cable
would run from the OUTREACH Max to
the camera.
Max POE power
OUTREACH Max enables network range
extension to all POE devices that are
compatible with IEEE 802.3af, which
is the universal POE standard for low
power network devices such as fixed
IP cameras.
In addition, OUTREACH Max is also
compatible with high-power standards
such as POE Plus (IEEE 802.3at), and
even “4-pair” POE for devices of 60 watts
or more.
Note that OUTREACH Max is designed
for connection to POE-compatible
equipment only. If POE power is not
required, Veracity’s OUTREACH Lite
should be specified instead.
Go further
If POE and network extension beyond
200 metres (656 ft) is required, more
than one OUTREACH Max may be installed
in series. For example, a 300 metre
(984 ft) connection between a POE switch
and a 10 watt IP camera can be achieved
by fitting two OUTREACH Max units at
100 metre intervals along the cable.
Or a 5 watt IP camera may be located
up to 800 metres away, using seven
OUTREACH Max units and Veracity’s
OUTSOURCE POE injector.
The maximum extension distance depends
on how much power is required and
which POE source is used. See the tables
on the next page or read Vera ci t y’s
“Long Range Ethernet Extension” white
paper on our website.
No restrictions
Because OUTREACH Max simply
restores the network connection every
100 metres, the full (200Mbit/s)
bandwidth of 100BASE-T Ethernet
is maintained across the entire link.
This maximises performance and
transparency, with no risk of a reduced
or unpredictable bandwidth, even at
distances of several hundred metres.
POE
POE NETWORK
SWITCH
POWER
ETHERNET WITH POE ETHERNET DATA ONLY
Diagram 1. A single OUTREACH Max doubles the cable range to a POE IP Camera.
Each cable segment can be up to 100 metres.
IMAGINATION INNOVATION INTEGRATION
NETWORK DATA
VOR-ORM
IP CAMERA
100M100M
Page 3
NETWORK DATA ONLY
POE NETWORK
SWITCH
POWER
ETHERNET WITH POE ETHERNET DATA ONLY
PLUS
VOR-OSP
Diagram 2. Veracity’s OUTSOURCE Plus provides enough power to allow 300
metres (984 ft) of extension to a POE Plus wireless access point, using two
OUTREACH Max units located at 100 metre intervals.
Which type of OUTREACH do I need?
Choosing between OUTREACH Max and OUTREACH Lite
is straightforward:
VOR-ORM
POE
NETWORK DATA
100M100M
VOR-ORM
IP DEVICE
100M
If only Ethernet
If POE forwarding is
For outdoor LAN extension, please see
OUTREACH Max XT and OUTREACH Lite
extension is required,
use OUTREACH Lite
also required, use
OUTREACH Max
XT versions. For network extension to
devices which are unknown or may
change, please consider OUTREACH
OUTREACH Lite extends Ethernet only
and does not forward POE.
OUTREACH Max supports all standards
of POE forwarding, but does not suppor t
Quad versions.
data-only extension.
Maximum Extension Distance
By installing an OUTREACH Max for every extra 100 metres of cable, POE and Ethernet can be extended for considerable
distances with no loss of network bandwidth.The limit depends on which POE Source is used and on how much power the IP
camera or other device requires:
POWER REQUIRED BY CAMERA
POE Source No POE 6W 12W 18W 25W
POE Switch 800m 400m 200m - -
OUTSOURCE 1150m 700m 400m - -
OUTSOURCE Plus 1150m 700m 500m 350m 200m
These are strict limits for installations
using regular 24AWG Cat 5e cable.
Distance is limited by the peak power
required by the device; its POE “power
class” is not used. Use of OUTSOURCE
or OUTSOURCE Plus injectors is
recommended for extension beyond
300 metres.
For example, installing a 5 watt IP camera
500 metres (1640 ft) from its power
source would require four OUTREACH
Max units and an OUTSOURCE injector.
The table shows that OUTSOURCE can
deliver 6 watts at 700 metres, so this
is safely within the maximum range that
is permitted.
“No POE” distances are for Ethernet
extension only, and the last device in the
chain must be an OUTREACH Lite.See
the OUTREACH Lite datasheet for details,
or consult Veracity’s application notes for
more in-depth information on long-range
Ethernet extension.
www.veracityglobal.com
Page 4
TECHNICAL SPECIFICATION
POWER
Power consumption 1.3 watts via POE
FORWARDED POE POWER Up to 70 watts depending on standard
Maximum current 0.7 amps on data pairs
Maximum current 1.5 amps on spare pairs
POE STANDARDS IEEE 802.3af POE
IEEE 802.3at POE Plus (2-event signature)
Custom POE (incl. “always-on 48V” and “4-pair”)
ETHERNET INTERFACE Two independently auto-configuring 10/100 ports
(10BASE-T/100BASE-TX, half/full duplex)
Patch or crossover cables supported
LEDS
Status Indicators Power good, network link/activity (both ports)
PHYSICAL/ENVIRONMENTAL
Dimensions L105mm W 40mm H 22mm
Weight 45g [1.6 oz]
Mounting Two 7mm diameter mounting holes. Centres 89mm apart
Operating temperature -10oC to 50oC [14oF to 122oF]
Relative humidity Up to 85%, non-condensing
Compliance CE, FCC, RoHS
PRODUCT CODES VOR-ORM OUTREACH Max Ethernet and POE extender
VOR-ORL OUTREACH Lite Ethernet extender
VOR-ORM-XT OUTREACH Max XT Outdoor Ethernet & POE extender
VOR-ORL-XT OUTREACH Lite XT Outdoor Ethernet extender
VOR-OS OUTSOURCE POE injector
VOR-OSP OUTSOURCE Plus POE Plus injector
Americas & Asia Sales :
Veracity USA Inc.
65 Harristown Road
Glen Rock
NJ 07452
USA
Tel: 1-800-679-1590
Fax: 1-800-679-0714
www.veracityglobal.com
© Veracity UK Ltd 2013 DV2.0 UK
OUTREACH Max OUTREACH Lite, OUTREACH Max XT, OUTREACH Lite XT, OUTSOURCE and OUTSOURCE Plus are trademarks of Veracity UK Ltd
sales@veracityusa.com
EMEA Sales :
Veracity UK Ltd
Prestwick International Aerospace Park
4 Dow Road
Prestwick
KA9 2TU
UK
Tel +44 (0) 1292 264967
Fax +44 (0) 845 528 1081
www.veracityglobal.com
sales@veracityuk.com
Loading...