Veracity POINTSOURCE Plus Specsheet

POE INJECTOR

INSTALLATION TOOLS

DATASHEET

PORTABLE BATTERY POWERED POE INJECTOR

PLUS

Install, configure,
focus and align IP
cameras without
network or POE

POINTSOURCE Plus™ is a rechargeable,

portable, battery powered POE injector for

IP cameras specifically designed to make

installation, site surveys, demonstration

and test work simple and fast.

| Allows local viewing of IP camera on laptop close to camera

| Enables rapid, precise adjustment of camera alignment,

focus and field of view

| Includes USB power port for charging phones and tablets

| Removable, rechargeable battery with sufficient power for

a full day’s installation work

| Supports all classes of 802.3af and 802.3at POE devices

| Installs and removes in seconds and reduces on-site time

| Additional spare batteries available for rapid swap over

Portable POE battery pack
for installation site work, site
surveys and demonstrations

POINTSOURCE Plus is ideal for powering POE IP cameras in-situ, when

in-line POE is not yet available. It permits complete camera alignment,

focus, configuration and test from a locally-connected laptop

Portable, Rechargeable, Power
Where You Need It

Veracity’s POINTSOURCE Plus is a

portable, rechargeable battery - powered

POE (Power over Ethernet) injector. It is

designed for field use, being compact,

easy to handle, with a useful shoulder

strap, which leaves your hands free.

It can deliver enough power to support

a full day’s IP camera installation work.

POINTSOURCE Plus provides a similar

functionality to Veracity’s PINPOINT, but

includes a built-in POE power source

to allow installation and set-up of IP

cameras before POE power is available

through the network.

POINTSOURCE Plus can be used

with all IEEE 802.3af and IEEE 802.3at

POE compatible equipment, (commonly

known as POE and POE Plus) including

IP cameras, Wireless Access Points,

VOIP phones and POE-powered Access

Control devices.

On Site Configuration

The most common application for

POINTSOURCE Plus is the in-situ

configuration, set-up and fine adjustment

of IP cameras on an installation site. By

simply connecting a laptop to the IP

camera through POINTSOURCE Plus,

all aspects of the camera image (focus,

direction, aperture, zoom, resolution,

compression etc.) can easily be viewed

and adjusted.

On Site Surveys and
Pre-Installation Trials

POINTSOURCE Plus allows the rapid

set-up of an IP camera during site

surveys, allowing the integrator to

capture snapshots or video clips of the

DATA

actual on-site scenes for presentation

to the prospective end-user. This is

an effective example of the saying "A

picture paints a thousand words.”

Customer Demonstrations Can
Be Given Anywhere

Any new IP camera can very quickly be

demonstrated to a client or consultant

using just the camera, a laptop and

the POINTSOURCE Plus package. No

external power or network switch is

required, allowing demonstrations to

be done anywhere, from a café table

top to a desert road.

Mobile & Temporary Installations

A POINTSOURCE Plus and IP camera

with an SD-card slot are all that is

required for a very compact and easily

transported temporary IP video

surveillance recording system.

DATA POE

LAPTOP

ETHERNET WITH POE ETHERNET D ATA ONLY

POINTSOURCE Plus delivers Ethernet and
POE Plus to an IP camera for installation
and set-up.

IP CAMERA