Veracity HIGHWIRE Quad Specsheet

IMAGINATION INNOVATION INTEGRATION SUMMARY

4 PORT ETHERNET OVER COAX ADAPTOR

HIGHWIRE Quad allows four IP cameras to

be connected over one existing coax cable

Legacy coax cabling can be used as a network connection and an existing 12V DC
or 24V AC supply can be converted into POE for the new IP cameras

Replacement of single analogue camera with multiple IP devices

HIGHWIRE with integrated 4-port POE switch

100Base-TX Ethernet over 300m of RG59 coax (500m on RG6)

Flexible low-voltage power input options (10-40V DC, 20-28V AC)

Uses standard single-port HIGHWIRE at control room end

Fully automatic - no configuration required

Robust wall-mountable enclosure

TECHNICAL SPECIFICATION

POWER
Input connector Detachable screw terminal
Power input 10-40V DC or 20-28V AC (type and polarity auto detected)
Power consumption 40 watts required for full power operation, 3.4A at 12V, 1.7A at 24V AC

POE STANDARDS
IEEE 802.3af compliant PSE

FORWARDED POE POWER

30.8 watt budget managed across 4 ports
Max 15.4 watts per port

HIGHWIRE INTERFACE
Connector type BNC 75ohm
Cable type 75ohm (RG59 or similar)
Range Up to 300m on RG59, 350m on RG6, 500m on RG11, all at full rate
Bandwidth 200Mbps (total up + down)

ETHERNET INTERFACE
Connector type RJ45, unmanaged 10/100 switch
Rates 10BASE-T or 100BASE-TX and full duplex, auto configuring
Cable type Straight through or cross-over Cat 5, Cat 5e or Cat 6 patch

LED INDICATORS
Green – BNC side Constant Power ON, full HIGHWIRE data link
Blink Power ON, no HIGHWIRE link
Green – RJ45 side Constant POE enabled
Blink Port error or power budget exceeded
Off No POE requested
Amber – RJ45 side Constant Ethernet OK
Blink Network activity

PHYSICAL/ENVIRONMENTAL
Dimensions L 110mm W 91mm H 32mm (L 140mm with wall mount lugs)

Mounting 4mm mounting holes on 130mm centres
Weight 290g [10.2oz]
Operating temperature -10ºC to 50ºC [14ºF to 122ºF]
Relative humidity 85% non-condensing
Compliance CE, FCC, RoHS

PRODUCT CODES
VHW-HWQ HIGHWIRE Quad Ethernet over coax adaptor
with integrated 4-port POE switch
VQ-24V 24V DC Power Supply for Quad units
VHW-HW HIGHWIRE Ethernet over coax cable adaptor
VPSU-12V-U 12V DC Power Supply (for standard HIGHWIRE)
VHW-WMB Wall Mounting Bracket (for 1 HIGHWIRE unit)
VHW-DNB DIN Rail Mounting Bracket Kit
VHW-1U Rackmount Kit (bracket for 8 std. units in 1U high)
VHW-RMPSU-UK Power Supply for rackmount kit (8 units)

© Veracity UK Ltd 2013 WV2.0 UK

HIGHWIRE QUAD is a trademark of Veracity UK Ltd

Americas & Asia Sales :

Veracity USA Inc.
65 Harristown Road
Glen Rock
NJ 07452
USA

Tel: [phone]
Fax: [phone]
www.veracityglobal.com
[e-mail]

EMEA Sales :

Veracity UK Ltd
Prestwick International Aerospace Park
4 Dow Road
Prestwick
KA9 2TU
UK
Tel [phone]
Fax [phone]
www.veracityglobal.com
[e-mail]