Veracity CAMSWITCH 4 PLUS User Manual
We, Veracity UK Ltd. of Prestwick International Aerospace Park, 4 Dow Road,
Prestwick, KA9 2TU, United Kingdom, declare under our sole responsibility that the
product :VCS-4P1 (CAMSWITCH 4 Plus) is in conformity with the essential
requirements and other relevant requirements of the EMC Directive (2004/108/EC)
The product is in conformity with the following standards:
EN 55022:2010
EN 55024:2010
Responsible Person Mr Alastair McLeod, Managing Director
Issued 6th May 2013 at Prestwick. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)this device may not cause
har mful inter ference, and (2) this device must accept any inter ference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits f or a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable pr otection against harmful interfer ence
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with t he instruction manual, may cause harmful
interference to radio communications. Operation of t his equipment in a residential area is likely to caus harmful
interference in which case the user will be required t o correct the interference at his own expense.
APPLICATION DIAGRAM | DC POWERED
• When used with an optional power supply, CAMSWITCH 4 Plus delivers a network
connection with optional 802.3af/at power to up to 4 cameras.
802.3AT POE NETWORK SWITCH
QUICK START GUIDE
VCS-4P1
NETWORK
SWITCH
POWER
ETHERNET WITH POE ETHERNET DATA ONLY
ALL CABLES UP TO 100M
CAT 5e OR BETTER
57V
APPLICATION DIAGRAM | POE POWERED
• CAMSWITCH 4 Plus can be POE-powered. Veracity’s OUTSOURCE Plus injector
is recommended for POE-forwarding applications.
NETWORK
SWITCH
POWER
POWER
ETHERNET WITH POE ETHERNET DATA ONLY
PLUS
VOR-OSP
DISTANCE FROM VCS-4P1
TO NETWORK SWITCH
MAY BE UP TO 100M
VCS-4P1
VCS-4P1
UP TO 4
POE OR
NON-POE
DEVICES
POE
DEVICES
UP TO
25 WATTS
TOTAL
(SEE TABLE)
NON-POE
DEVICES MAY
ALSO BE
CONNECTED
CONNECTIONS
• All ports support 10/100 Base-T with
auto-negotiation and auto-crossover
+
_
4 network ports with 802.3at POE
Data port with optional POE in
57V DC input
Port LEDs : Green POE enabled (POE port),
Power good (non-POE port)
Yellow Ethernet Link /Activity
POE POWER AVAILABILITY
• CAMSWITCH 4 Plus can deliver up to full 802.3at POE Plus
power on all 4 ports, however the total budget is limited by the
power supply connected.
• The power budget is the total power used by POE devices.
This information may be found in the IP camera or POE device
datasheets. POE power classes are ignored.
• For example, the VPSU-57V-1500 provides a 78W budget.
This is enough for two full-power 802.3at (25.5 watt) cameras
plus two full power 802.3af (13 watt) cameras, or four
cameras of up to 19 watts each.
• To check the power budget for your supply, refer to the table
below. Only Veracity 57V power supplies may be connected
to DC inputs.
INPUT SOURCE BUDGET
VPSU - 57V - 800 40 watts
DC
VPSU - 57V - 1500 78 watts
POE switch 10 watts
POE
VOR - OSP 25 watts
WALL MOUNT CLIPS
• To mount the unit securely to a at surface, t the enclosed
clips as shown and refer to the drilling template below.
1. Insert
DIMENSIONS | MOUNTING HOLE TEMPLATE
• Width 110mm (131mm inc. clips) | Depth 70mm (76mm inc. connectors) | Height 22mm | Weight 135g
Scale 1:1
2. Click
DIN RAIL CLIP (Option)
• Remove the two rear screws and t as shown.
131mm
8
25mm
110mm
5
69.2mm
64.2mm
122mm
Loading...