Venturer VPF810DL, VPF1010DL User Manual

Digital Picture Frame

with128MB

Internal Memory

Operating Instructions

VPF810DL-CHER

VPF1010DL-BRW / VPF1010DL-BLK

Need More Help?

DO NOT RETURN THIS PRODUCT TO THE STORE

Please visit online help at http://www.1800customersupport.com/V7

- 1 -

SAFETY PRECAUTIONS

The lightning flash with an arrowhead
symbol, within the equilateral triangle,

is intended to alert the user to the
presence of uninsulated "dangerous voltage" within
the product's enclosure that may be of sufficient
magnitude to cause an electric shock.

CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER­SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.

WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE. DO NOT PLACE OBJECTS FILLED WITH LIQUIDS ON OR NEAR THIS
UNIT.

On Placement

• Do not use the unit in places that are extremely hot, cold, dusty or humid.

• Do not restrict the airflow of the unit by placing it in a place with poor airflow, by covering it with
a cloth, or by placing it on carpeting.

• Keep the stand of the unit clear from cables. Cables could pull the unit to the floor.

• The unit should not be exposed to excessive heat such as sunshine, fire or the like.

On Safety

• When connecting or disconnecting the AC power adapter, grip the plug and not the cord itself.
Pulling the cord may damage it and create a hazard.

• When you are not going to use the unit for a long period, disconnect the AC power adapter.

Temperature and Humidity Limitations

• Operating temperature: 0°C ~ 45°C (32°F ~ 113°F)

• Humidity: 20% ~ 80%

Rating Plate Location

• The rating plate is located on the back of the unit.

WARNING: Should any trouble occur, disconnect the AC power adapter and refer
servicing to a qualified technician.

Stop the unit before connecting or disconnecting a memory card or USB flash drive.
Do NOT connect or disconnect external equipment when the unit is playing, coping or
deleting files.

“ ” may appear on the screen during operation. A “ ” means that the desired operation
is not permitted by the unit.

The exclamation point within the
equilateral triangle is intended to alert

the user to the presence of important
operating and maintenance (servicing)
instructions in this owner's manual.

- 2 -

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s
instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong is provided for your safety. When the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete
outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.

11 . Only use attachments/accessories specified by the manufacturer.
12 . Use only with a cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.

13 . Unplug this apparatus during lightning storms or when unused for long periods.
14 . Refer all servicing to qualified service personnel. Servicing is required when the apparatus has

been damaged in any way, such as the power-supply cord or plug is damaged, liquid has spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.

FCC Statements

This device complies with the Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause

undesirable operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an AC power outlet on a circuit different from that to

which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved b y the party responsible for

compliance could void the user's authority to operate the equipment.

THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.

Portable
Cart Warning

- 3 -

1

2

QUICK START GUIDE

To DC IN 9V jack

TABLE OF CONTENTS

Safety Precautions ........................ 2

Important Safety Instructions ....... 3

Quick Start Guide.......................... 4

Table of Contents ........................... 4

Accessories ................................... 5

Remote Control .............................. 5

Control Reference Guide .............. 6

Control Function & Display Icon... 7

Installation ..................................... 8

Using the Stand ......................... 8

Mounting on the Wall.................. 8

Power Supply ................................. 9

Inserting Memory Devices.......... 10

Viewing Photos ............................ 11

Viewing Photos Slide Show...... 11

Viewing Photos......................... 11

ENTER

MODE

Press the Slide Show button ( )to start
displaying photos.

Insert a memory card.
For easy removal, Memory Devices will
stick out a bit.

Switch to ON
position.

SETUP
MENU

EXIT

To AC outlet

Photo Viewing Setup Menu ......... 12

Full Screen................................ 12

Photo Slide Show Effect .......... 12

Photo Slide Show Speed .......... 12

On-screen Language ................ 12

Listening to Music ....................... 13

Listening to Music .................... 13

Music Repeat............................ 13

Watching Video Files................... 14

Watching Video Files................ 14

Video Repeat ............................ 14

Copying / Deleting Media Files ... 15

Copying Files ............................ 15

Deleting Files............................ 15

Troubleshooting Guide ................ 18

Maintenance ................................. 16

Cleaning the Unit ...................... 16

Cleaning the LCD Screen ......... 16

- 4 -

ACCESSORIES

Please check and identify the supplied accessories.

• To order accessories visit web site (http://www.1800customersupport.com/V7)

AC Power Adapter .................................................................................... x 1

Remote Control......................................................................................... x 1

REMOTE CONTROL

Using the Remote Control

• Point the remote control at the REMOTE SENSOR located on the unit.

• When there is a strong ambient light source, the performance of the infrared

REMOTE SENSOR may be degraded, causing unreliable operation.

• The recommended effective distance for remote operation is about 16 feet (5

meters).

Remove the plastic sheet before using the remote control.

TO CHANGE REMOTE BATTERY

1. Open the battery door. 2. Insert one CR2025 (3V) size battery.

BA TTERY REPLA CEMENT

When the battery becomes weak, the operating distance of the remote control will
be greatly reduced and you will need to replace the battery.

NOTE:

• If the remote control is not going to be used for a long time, remove the battery

to avoid damage caused by battery leakage corrosion.

PLACEMENT

rear of the unit

WARNING:

Do not dispose of the battery in a
fire. It may leak and/or explode.

CAUTION:

Danger of explosion if battery is
incorrectly replaced. Replace only
with the same or equivalent type.

- 5 -