Venturer STB7766G User Manual

0 (0)
Venturer STB7766G User Manual

STB7766G

ATSC Converter Box

Instruction Manual

Need More Help?

DO NOT RETURN THIS PRODUCT TO THE STORE

Please visit online help at http//www.venturer.com

- 20 -

SAFETY PRECAUTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to cause an electric shock.

The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this owner’s manual.

WARNING:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT PLACE OBJECTS FILLED WITH LIQUIDS ON OR NEAR THIS UNIT.

STB7766G

Equipment tested for compliance as a complete unit

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit diff erent from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

- 1 -

IMPORTANT SAFETY INSTRUCTIONS

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with a dry cloth.

7.Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your AC power outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when

the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture , does not operate normally, or has been dropped.

Portable Cart

Warning

- 2 -

ACCESSORIES

AC Adapter ..............................................................................................................................

x 1

Remote Control ........................................................................................................................

x 1

AAA Batteries (for Remote Control) .........................................................................................

x 2

RF Cable ..................................................................................................................................

x 1

CONTENTS

Safety Precautions ......................................

1

Important Safety Instructions .....................

2

Accessories .................................................

3

Contents .......................................................

3

Remote Control .................................................

4

Quick Start Guide ...........................................

5-6

Control Reference Guide ...............................

7-8

Connections .....................................................

9

ConnectingaTV(UsingtheRFCable)...................

9

ConnectingaTV(UsingtheAVCable)....................

9

Power Supply .................................................

10

Using the AC Adapter .........................................

10

Turning on the Unit ..............................................

10

Dolby Digital ......................................................

10

Basic Operation ..............................................

11

Searching for Channels Automatically ................

11

Viewing theTV Channel .....................................

11

Adjusting theVolume .........................................

11

Viewing the Information .....................................

11

Viewing Signal ..................................................

11

On-Screen Menu-Channel ..............................

12

Channel Scan/Add/ Edit .....................................

12

Manual Scan .....................................................

12

Output Channel .................................................

13

On-Screen Menu-Option

................................ 13

Clock ................................................................

13

Aspect Ratio ......................................................

13

Language .........................................................

14

Audio Language ................................................

14

Caption Select ..................................................

14

DCC View ..........................................................

15

Sleep Mode .......................................................

15

On-Screen Menu-Lock .................................

15

Lock System .....................................................

15

Set Password ....................................................

16

Block Channel ...................................................

16

TV Rating-Children ............................................

16

TV Rating-General .......................................

16 -17

Movie Rating .....................................................

17

Downloadable RRT ...........................................

17

Maintenance ...................................................

18

Troubleshooting Guide ...................................

18

- 3 -

REMOTE CONTROL

Point the remote control at the REMOTE SENSOR located on the unit.

When there is a strong ambient light source, the performance of the infrared REMOTE SENSOR may be degraded, causing unreliable operation.

The recommended effective distance for remote operation is about 16 feet (5 meters).

To Install Batteries

1. Open the battery door.

2. Insert two AAA batteries.

Battery Replacement

When the batteries become weak, the operating distance of the remote control is greatly reduced and you will need to replace them.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

Notes:

If the remote control is not going to be used for a long time, remove the batteries to avoid corrosion damage caused by battery leakage.

Do not mix old and new batteries. Do not mix ALKALINE, standard (CARBON-ZINC) or rechargeable (NICKEL-CADMIUM) batteries.

Always remove batteries as soon as they become weak.

Weak batteries can leak and severely damage the remote control.

WARNING: Do not dispose of batteries in a fire. Batteries may explode or leak.

- 4 -

QUICK START GUIDE

STEP 1: CONNECTIONS

Option One: Using the RF Cable to Connect a TV

1.Connect an antenna cable to the RF IN terminal on the rear of the unit.

2.Use the RF cable (included) to connect the unit and TV/Monitor.

3.Use the AC adapter (included) to connect a suitable wall outlet.The supplied 9V adapter operates on AC 120V ~ 60Hz.

4.Turn on your TV and and switch TV’s channel selection to Channel 4 .

Note:

If a local TV Station happens to broadcast on Channel 4, we recommend you switch the unit’s RF Output Channel to Channel 3 (and switchTV to Channel 3), following the instructions on Page 13.

Rear of TV

Option Two: Using the AV Cable to Connect a TV

1.Connect an antenna cable to the RF IN terminal on the rear of the unit.

2.Use the AV Cable (not included) to connect the unit and TV/Monitor.

3.Use the AC adapter (included) to connect a suitable wall outlet.The supplied 9V adapter operates on AC 120V ~ 60Hz.

4.Turn on your TV and follow the instructions included with it to select the “AV IN” function.

YELLOW

RED

WHITE

Rear of TV

 

 

YELLOW RED

WHITE

 

 

 

 

 

 

 

 

Warning: This system does not support cable TV.

- 5 -

Loading...
+ 14 hidden pages