Page 1
Viewline Ammeter
Description
Indication of Battery charge and discharge current
Product Information
www.vdo.com
Features
Integrated Warning LED.
_
Changeable Frontbezels.
_
LED Illumination
_
Flush mount possibility
_
High reliability
_
Concept
Housing PC; flame retarding (UL94)
Bezel PC or ABS; several colors and shapes (see table)
Lens PMMA; double lens
Dial backlit; different colors (see table)
Pointer backlit, white on black dials; red on white dials
Illumination Dial: LED amber (605nm)
Pointer: LED red (632nm)
Warning LED red (632nm)
Mounting spinlock Nut; locking height 0,5mm – 20mm,
optional Studs and Bracket; locking height 2 – 15mm
Connection 8 pin MQS connector system
Picture: Ammeter
VDO – A trademark of the Continental Corporation
Page 2
Viewline Ammeter gauges
Technical Data
Installation depth 50mm
Installation diameter 52mm
Deflection angle 240°
Operating Voltage 8 – 32 Volt
Accuracy < 2,5 % of the full scale reading
Current consumption < 140 mA, including Warning LED
Operating temperature -30°C to +80°C; plated bezels (chrome) -30°C to +70°C
Storage temperature -40°C to +80°C for 48h; plated bezels (chrome) -40°C to +70°C
+90°C for 1h
Temperature shock Range -40°C to +85°C; plated bezels (chrome) -40°C to +70°C
Transformation time 10 seconds
Retention time 2h
Climatic test Range +25°C to +55°C
Rel. Humidity 95%
EMC in conformity with DIN_EN 61000-6-3
DIN_EN 61000-6-1
DIN_EN 61000-6-4
DIN_EN 61000-6-2
Standards EN 60945
GL, Category C, F (under preparation)
Vibration Sinus 2g; 10-500Hz; duration 16h
Noise 3g; 10-1000Hz, duration 8h
Mechanical shock continuous 25g; 6ms; 1Hz
Single shock 100g; 11ms
Free fall 1m; 3 times
Chemical resistance against - preservative agent
- preservative agent remover
- cold cleaner
- methylated spirit
- interior cleaner
- drinks containing caffeine and tannin
Nominal position NL 0 to NL 85 (DIN16257)
Protection class according to IEC 60529
Front: IP67 (in Nominal position)
Rear: IP52 (in Nominal position)
Reverse polarity protection yes, 5 minute
Short circuit protection yes, 1 minute
The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express
authorization is prohibited. Offenders will be held liable for the payment of damages. All right reserved in the event of the grant of a patent,
utility model or design
.
Technische Änderungen vorbehalten 12/09 Technical details subject to change 2 - 3
Page 3
Viewline Ammeter gauges
available Gauges:
No. packed
No.
unpacked
A2C59510000 A2C53211039
color
black
Measurement
range
ISO
Symbol
Sensor Voltage
Double
lens
+30A AMP 60mV 12+24 no
A2C59510001 A2C53211035
A2C59510002 A2C53210973
A2C59510003 A2C53210972
A2C59510004 A2C53211037
A2C59510005 A2C53211034
A2C59510006 A2C53210974
A2C59510007 A2C53210971
A2C59510022 A2C53210959
A2C59510023 A2C53210957
A2C59510024 A2C53210958
A2C59510025 A2C53210956
black
black
black
white
white
white
white
black
black
white
white
+60A AMP 60mV 12+24 no
+100A AMP 60mV 12+24 no
+150A AMP 60mV 12+24 no
+30A AMP 60mV 12+24 no
+60A AMP 60mV 12+24 no
+100A AMP 60mV 12+24 no
+150A AMP 60mV 12+24 no
+60A AMP 60mV 12+24 yes
+150A AMP 60mV 12+24 yes
+60A AMP 60mV 12+24 yes
+150A AMP 60mV 12+24 yes
Accessories:
A2C59510854 VL Mounting Kit (studs and brackets) 52, 85, 110mm
A2C59510864 VL Mounting bracket flush mount
A2C53215640 VL Sealing Ring 52mm flush mount
A2C59510847 Bush housing, 8-pin
A2C53324664 Protective connector cap, 8-pin
Tyco No. 539635-1 Hand pliers
Tyco No. 539682-2 Tool for hand pliers.
Tyco No. 1355718-1 Single contacts 0.14 – 0.22 mm² tin plated
Tyco No. 963729-1 Single contacts 0.5 – 0.75 mm² tin plated
Tyco No. 1355717-1 Strip 0.14 – 0.22 mm² tin plated
Tyco No. 928999-1 Strip 0.25 – 0.5 mm² tin plated
Tyco No. 963715-1 Strip 0.5 – 0.75 mm² tin plated
Bezels 52mm
black black nickel* brush aluminum* chrome gold* white
flat A2C53186040 A2C53293468 A2C53293480 A2C53186023 A2C53293482 A2C53186022
round A2C53186027 A2C53293494 A2C53293495 A2C53186029 A2C53293496 A2C53186028
triangle A2C53186024 A2C53293545 A2C53293546 A2C53186026 A2C53293548 A2C53186025
* Only on request, no part off standard portfolio
Shunts according DIN 43703; see:
The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express
authorization is prohibited. Offenders will be held liable for the payment of damages. All right reserved in the event of the grant of a patent,
utility model or design
.
www.crompton-instruments.com
Technische Änderungen vorbehalten 12/09 Technical details subject to change 3 - 3
Loading...