Vantec UGT-UF100 User Manual.pdf

90.34 Kb

7-Port USB 2.0 & FireWire 400

Combo PCI Host Card

User Manual

Model: UGT-UF100

All brand names and trademarks are properties of their respective owners.

w w w . v a n t e c u s a . c o m

Features and Benefits

zCombo design adds four USB 2.0 (480Mbps) and three FireWire (400Mbps) ports into your system

zHot-swapping feature allows you to connect/disconnect devices without first turning system off

USB 2.0 interface:

zCompliant with USB specification rev. 2.0

zSupports high-speed (480Mbps), full-speed (12Mbps), and low-speed(1.5Mbps) data transfer modes for simultaneous operation of multiple USB 2.0/1.1 devices

zWorks with a various type of USB devices including hubs, removable drives, digital cameras, scanner, CD-RWs, DVD-ROMs, PC video cameras, printers, and more…

FireWire 400 (1394a) interface:

zIEEE 1394-1995, 1394a-2000 and OHCI 1.1 standards

zSupports serial bus data transfer rates of 100, 200 and 400Mbps

zWorks with various types of 1394 devices including DV camcorder/cameras, hard disk drives, CD-RWs, DVD-ROMs, removable drives, scanners, and other audio/video devices





Package Contents

z1 x 7-Port USB 2.0 FireWire 400 Combo PCI Host Card

z1x 1394a DV cable (6-pin to 4-pin)

z1 x User’s Manual

System Requirements

zWindows® 2000/XP/Server 2003/Vista

zAvailable PCI slot

Hardware Description





Hardware Installation

1.Turn Off the power to your computer.

2.Unplug the power cord and remove your computer’s cover.

3.Remove the slot bracket from an available PCI slot

4.To install the card, carefully align the card’s bus connector with the selected PCI slot on the motherboard. Push the board down firmly.

5.Connect the system power source to the board’s power connector.

6.Replace the slot bracket’s holding screw to secure the card.





7.Replace the computer cover and reconnect the power cord.

Driver Installation

For Windows® XP/2000

Windows® 2000/XP will automatically detect and install the correct driver for the PCI USB 2.0 & IEEE 1394a Combo. However, please ensure you have the latest Service Pack Installed.

For Windows® XP

z Windows® XP Service Pack 1 or later

For Windows® 2000

z Windows® 2000 Service Pack 4 or later

For Windows® Server 2003/Vista

Windows® Server 2003 has built-in driver support for this controller. Just install the board and Windows will automatically detect and install the correct drivers for it. No additional driver is necessary.





To Verify Windows Installation

1.Right click My Computer, then click Manage. Click Device Manager.

2.Double click IEEE 1394 Bus host controllers option and a VIA OHCI Compliant IEEE 1394 Host Controller should be displayed

3.Double click Universal Serial Bus controllers option.

-USB Root Hub (USB 2.0 Root Hub in Windows® 2000)

-USB Root Hub

-USB Root Hub

-VIA Rev 5 or later USB Universal Host Controller

(VIA USB Universal Host Controller in Windows® 2000)

-VIA Rev 5 or later USB Universal Host Controller (VIA USB Universal Host Controller in Windows® 2000)

-VIA USB Enhanced Host Controller