Vaddio Thin Profile Wall Mount for LifeSize User Manual

Installation and User Guide

Camera and Electronic Products for Integrators

Vaddio™ Thin Profile Wall Mount for the LifeSize HD PTZ Camera

Model Number 535-2000-222

Figure 1:

General Installation Diagram

Rounded corners for
safety and ease of
handling

UNPACKING:

Carefully remove the product and all of the parts from the packaging.
Unpack and identify the following parts:
 One (1) Thin Profile Wall Mount for the LifeSize HD PTZ Camera

(Camera not included)

 One (1) ¼”-20 x ½” Camera Mounting Screw
 Four (4) #6 x 1” Sheet Metal Screws
 Four (4) Conical Wall Anchors
 Documentation

MOUNTING THE CAMERA:

The Thin Profile Wall Mount for the LifeSize HD Camera ca n be mou nted t o a 2-gang wall bo x or mount ed directl y to a dr ywall
surface with the supplied wall anchors or other spiral type wall anchors of the integrator’s choice. The slotted mounting hole s
are 90º opposed from top to bottom to ensure that the camera can be adjusted and mounted level. Note: When locating the
camera, consider viewing angles, lighting conditions, possible line of site ob structions and check for i n- wall obstructions where
the camera is to be mounted. Pick a mounting location to optimize the performance of the camera.

INTENDED USE:

This Thin Profile Wall Mount was designed, built and tested for use indoors and to support the weight, size and shape of the
LifeSize HD Camera only. Using this mount for any other device could damage that device and/or create a potentially unsafe
operating condition.

HARDWARE WARRANTY:

Please see the Vaddio website at http://www.vaddio.com
Statement of Warranty covers the policies and procedures of the Hardware Warranty, Exclusions, Customer Service,
Technical Support, Return Material Authorizations (RMA), Voided Warrant y, Shipping and Handling and Products Not Under
Warranty. The Vaddio Warranty Statement supercedes all other published warranty statements in content and coverages.
Vaddio Technical Support can be contacted through the Vaddio website or through e-mail support at

mailto:[e-mail]

Durable black powder
coat finish (paintable to
match any décor)

90º Opposed slotted
mounting holes for easy
camera leveling

¼”-20 mounting screw to secure camera to
the mount (not all mounts or cameras have
this slot for a ¼”-20 screw). Note: The
integrator is responsible for attaching the
camera to the mount securely.

Figure 2:

Thin Profile Wall
Mount for LifeSize
PTZ Camera

for the Vaddio Statement of Warranty for all Vaddio Products. The

.

Thin Profile Wall Mount can
be mounted directly to the
wall with wall anchors or
can be mounted directly to
a 2-gang electrical wall box.

©2007 Vaddio - All Rights Reserved Reproduction in whole or in part without written permission is prohibited. Specifications are subject to change
without notice. Vaddio is a registered trademark of Vaddio. All other trademarks are property of their respective owners. Vaddio, 4800 Quebec Ave. N.,
Minneapolis, MN 55428, Toll Free: 1-800-572-2011, Main: 76 3-971-4400, FAX: [phone]. Doc ument Number 341-570 Rev. A