Vaddio CCU H900 User Manual
Installation and User Guide
999-6897=-000
Vaddio™ Quick-Connect™ CCU H900 Kit for the Sony® BRC-H900
Camera (camera not included) and the WallVIEW™ CCU H900
(camera Included)
Part Numbers without Camera:
998-6897-000: Quick-Connect CCU Kit for the BRC-H900 Camera (camera not included) - North America
998-6897-001: Quick-Connect CCU Ki t for the BRC-H900 Camera (camera not included) - International
Part Numbers with Camera:
999-6897-000: WallVIEW CCU H900 System (Camera Included) - North America
999-6897-001: WallVIEW CCU H900 System (Camera Included) - International
© 2012 Vaddio - All Rights Reserved. Specifications are subject to change without prior notice. Document Number 342-0507 Rev A
Quick-Connect CCU Kit for BRC-H900 Camera
Inside Front Cover - Blank
© 2012 Vaddio - All Rights Reserved. Document Number 342-0507 Rev A Page 2 of 16
Quick-Connect CCU Kit for BRC-H900 Camera
TableofContents
Overview: ................................................................................................................................................................... 4
Figure: Front Panel of the Quick-Connect CCU for the BRC-H900 Camera .................................................... 4
Important Safeguards: ........................................................................................................................................... 4
Intended Use .......................................................................................................................................................... 4
Save These Instructions ........................................................................................................................................ 4
Information: ............................................................................................................................................................ 5
Unpacking: ................................................................................................................................................................. 5
998-6897-000: Quick-Connect CCU Kit for the BRC-H900 Camera - North America .......................................... 5
998-6897-001: Quick-Connect CCU Kit for the BRC-H900 Camera - International ............................................. 5
Anatomy of the CCU Controlled Camera System ..................................................................................................... 6
Image: The Quick-Connect CCU Front Panel Controls (left to right) ................................................................ 6
Image: Magnification of control Buttons and Rotary Encoders (from left to right) ............................................ 6
Image: Rear Panel Connections and Controls (left to right) ............................................................................. 7
Image: EZIM CCU Top Panel (left to right) and ISO View of EZIM CCU .......................................................... 8
Installation: ................................................................................................................................................................. 8
Installation Basics: ................................................................................................................................................. 8
Step By Step Mounting Instructions: ...................................................................................................................... 9
Image: Heavy duty wall mount .......................................................................................................................... 9
Image: Heavy Duty Wall Mount ......................................................................................................................... 9
Drawing: High Definition Break Out Cable ........................................................................................................ 9
Drawing: Basic System Connectivity ............................................................................................................... 10
Completing the Installation: .................................................................................................................................. 11
Optimizing System Performance: ............................................................................................................................ 11
General Specifications ......................................................................................................................................... 11
Warranty Information: .............................................................................................................................................. 12
Compliance and CE Declaration of Conformity - Quick-Connect CCU and EZIM CCU ...................................... 13
Appendix 1: Cable Pin-outs for the Quick-Connect CCU System .......................................................................... 14
© 2012 Vaddio - All Rights Reserved. Document Number 342-0507 Rev A Page 3 of 16
Quick-Connect CCU Kit for BRC-H900 Camera
p
Overview:
The Vaddio Quick-Connect CCU system for the BRC-H900 camera allows the user to control
the color output of the camera’s image sensor through both Red and Blue Gain controls, Detail,
as well as Iris and Gain levels, to provide a higher quality image. In addition, there are also
color parameters that control the color level, phase and the offset. Gain and White Balance
adjustments for added fine-tuning of the cameras image.
Figure: Front Panel of the Quick-Connect CCU for the BRC-H900 Camera
The Quick-Connect system uses high speed differential signaling (HSDS) which, is an active video transmission
method that delivers low-loss, high-quality video over Cat- 5 cabling distances up to 500’ (152.4m).
The BRC-H900 Camera with 3CMOS, ½” Exmor image sensors produces vivid HD video quality and the CCU is
capable of delivering any resolution of high definition video that the camera produces (1080i/59.94/50 and
720p/59.94/50) as well as composite video in either NTSC or PAL formats.
The CCU has many features, including Tally illumination on the front panel and on the on the camera which
allows the presenter to know which camera is live and what CCU to adjust if a tweak is needed. Genlock is
delivered to the camera over Cat-5 with a level adjustment on the EZIM CCU. The ability to store settings on two
discrete Scene buttons is included, and buttons for Auto White Balance, One Push White Balance and Auto Iris
programming are also available.
The systems are available as a WallVIEW CCU H900 System with the Camera included, or as a Quick-Connect
CCU H900 Kit without the camera.
Important Safeguards:
Read and understand all instructions and warranty statements before using. Do not operate any device if it has
been dropped or damaged. In this case, a Vaddio technician must examine the product before operating. To
reduce the risk of electric shock, do not immerse in water or other liquids and avoid extremely humid conditions.
General Safeguard: Use only the power supply provided with the system. Use of any
unauthorized power supply will void any and all warranties. Please do not cut the
secondary side (or the DC side) of the power supply and attempt to extend the power to the
camera. The warranty is voided when the cable is cut.
Intended Use
Before operating the device, please read the entire manual thoroughly. The system was designed, built and
tested for use indoors, and with the provided power supply and cabling. The use of a power supply other than the
one provided or outdoor operation has not been tested and could damage the device and/or create a potentially
unsafe operating condition.
Save These Instructions
The information contained in this manual will help you install and operate your product. If these instructions are
misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product
drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from
www.vaddio.com free of charge.
© 2012 Vaddio - All Rights Reserved. Document Number 342-0507 Rev A Page 4 of 16
Please do not use “pass-thru” type RJ-45 connectors. These pass-thru type connectors do not
work well for professional installations and can be the caus e of intermittent connections which,
can result in the RS-232 control line failing and locking up, and/or compromising the HSDS™
signals. For best results please use standard RJ-45 connectors and test all cables for prope r pinouts
rior to use and connection to Vaddio product.
Quick-Connect CCU Kit for BRC-H900 Camera
Information:
For RS-232 control information, please see the full-length Technical Manual for the Sony BRC-H900. This
manual can be found either on the Sony or the Vaddio website.
Unpacking:
998-6897-000: Quick-Connect CCU Kit (NO CAMERA) for the BRC-H900 Camera - North America
Carefully remove the device(s) and all parts from the packaging. Please do
not toss the packaging yet, just set it aside where it won’t be in the way.
Unpack and identify the following parts:
One (1) Quick-Connect CCU (P/N: 998-1105-036) for the BRC-H900
One(1) 2-pin Molex 5.0mm Euro style connector for the Tally Input
One (1) 36 VDC Switching power supply with power cord for North America
One (1) EZIM CCU (998-6700-002)
Two (2) 6-32 x .188” Pan Head for attaching EZIM to the Wall Mount
One (1) HD Break-out Cable for EZIM CCU t o Camera
One (1) DE-9F to RJ-45F EZCamera Control Adapter (998-1001-232)
One (1) Heavy Duty, Gusseted Wall Mount 535-2000-225
Four (4) 800-616, #8 x 1.25” Sheet Metal Screws
Four (4) 800-617, Wall Anchors (EZ Anchors)
Two (2) 85033, ¼” x 20 x 0.5” Pan Head Screws
Manual for Quick-Connect CCU
998-6897-001: Quick-Connect CCU Kit (NO CAMERA) for the BRC-H900 Camera - International
Carefully remove the device(s) and all parts from the packaging. Please do
not toss the packaging yet, just set it aside where it won’t be in the way.
Unpack and identify the following parts:
One (1) Quick-Connect CCU (P/N: 998-1105-036) for the BRC-H900
One(1) 2-pin Molex 5.0mm Euro style connector for the Tally Input
One (1) 36 VDC Switching power supply
One (1) Euro Power Cord
One (1) UK Power Cord
One (1) EZIM CCU (998-6700-002)
Two (2) 6-32 x .188” Pan Head for attaching EZIM to the Wall Mount
One (1) HD Break-out Cable for EZIM CCU t o Camera
One (1) DE-9F to RJ-45F EZCamera Control Adapter (998-1001-232)
One (1) Heavy Duty, Gusseted Wall Mount 535-2000-225
Four (4) 800-616, #8 x 1.25” Sheet Metal Screws
Four (4) 800-617, Wall Anchors (EZ Anchors)
Two (2) 85033, ¼” x 20 x 0.5” Pan Head Screws
Manual for Quick-Connect CCU
999-6897-000: WallVIEW CCU H900 Systems - North America
Unpack and identify the following parts:
One (1) 998-6897-000: Complete Quick-Connect CCU Kit Above for the BRC-H900
Camera - North America
One Sony BRC-H900 Camera Complete with Manual and all accessories Sony
includes
999-6897-001: WallVIEW CCU H900 Systems - International
Unpack and identify the following parts:
One (1) 998-6897-001: Complete Quick-Connect CCU Kit Above for the BRC-H900
Camera - International
One Sony BRC-H900 Camera Complete with Manual and all accessories Sony
includes
© 2012 Vaddio - All Rights Reserved. Document Number 342-0507 Rev A Page 5 of 16
Loading...