Vacmaster CC0101 Use & Care Manual

Use & Care Guide

Bagless Canister Vacuum Cleaner

MODEL NO. CC0101

www.vacmaster.com

Cleva North America, Inc.

Greenville, SC 29607

[phone]

Made in China

TABLE OF CONTENTS

SECTION

Important Safety Instructions................................................................................................................3-4

Warranty…………................................................................................................................................... 4

Technical Data

Getting To Know Your Vacuum................................................................................................................5

General Assembly Instructions............................................................................................................ 6-7

Operating Instructions....................................................................................................................... 7-10

Maintaining Your Vacuum................................................................................................................ 11-14

Troubleshooting................................................................................................................................15-16

....................................................................................................................................... 4

PAGE

Thank you for purchasing this Vacmaster® vacuum cleaner. With it you are
obtaining a high quality product that is engineered for optimal performance.

FOR YOUR SAFETY
Read and understand this manual before use.
Keep this manual and your sales check (receipt) in a safe place for future
reference.

-2-

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be
followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.

Failure to follow the warnings and instructions may result in electric shock, re

and/or serious injury.

WARNING - To

• Do not leave appliance when plugged in. Unplug from outlet when not in use
and before servicing.

• Do not use outdoors or on wet surfaces.

• Do not allow to be used as a toy. Close attention is necessary when used by
or near children.

• Use only as described in this manual. Use only manufacturer’s recommended
attachments.

• Do not use with damaged cord or plug. If appliance is not working as it should,
has been dropped, damaged, left outdoors, or dropped into water, return it to
a service center.

• Do not pull or carry by cord, use cord as a handle, close a door on cord, or
pull cord around sharp edges or corners. Do not run appliance over cord.
Keep cord away from heated surfaces.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

• Do not handle plug or appliance with wet hands.

• Do not put any object into openings. Do not use with any opening blocked;

keep free of dust, lint, hair, and anything that may reduce air ow.

• Keep hair, loose clothing, ngers, and all parts of body away from openings

and moving parts.

• Turn off all controls before unplugging.

• Use extra care when cleaning on stairs.

• Do not use to pick up ammable or combustible liquids, such as gasoline, or

use in areas where they may be present.

• Do not pick up anything that is burning or smoking, such as cigarettes,
matches, or hot ashes.

• Do not use without lters in place.

• Hold plug when rewinding onto cord reel. Do not allow plug to whip when
rewinding.

reduce the risk of re, electric shock, or injury:

-3-

SAVE THESE INSTRUCTIONS

Household use only

WARRANTY

FOR ONE YEAR from the date of sale, this product is warranted against defects
in material or workmanship when it is assembled, operated and maintained
according to all supplied instructions.

WITH PROOF OF SALE, a defective appliance will be replaced free of charge.
For warranty coverage details to obtain free replacement, visit the web page:
www.vacmaster.com or call [phone].

• This warranty does not cover lters, which are expendable parts that

can wear out from normal use within the warranty period.

• This warranty is void if this product is ever used for other than private
household purposes.

• This warranty gives you specic legal rights, and you may also have other

rights which vary from state to state.

TECHNICAL DATA

Bagless Canister Vacuum Cleaner
Model: CC0101
Rated Voltage: 120V AC
Rated Frequency: 60Hz
Nominal Current: 8.5A

-4-

GETTING TO KNOW YOUR VACUUM

Dusting Brush

Crevice Tool

Attachment Holder

Hose

Air Outlet Filter

Air Outlet

Filter Holder

HEPA Filter

Dust Cup

Dust Cup

Release Button

On/Off Switch

Power Cord

Exhaust Foam

Filter

Exhaust Foam Filter Cover

REPLACEMENT PARTS

Item Part No.

Attachment Holder 591018182

Crevice Tool 591018183

Dusting Brush 591018181

HEPA Filter 591018155

Air Outlet Filter 591018156

Exhaust Foam Filter 591018119

Floor Nozzle 591018185

Hose 591018168

Cord Rewind
Button

Suction
Control
Valve

Telescoping
Wand

Telescoping
Wand Length
Adjust Button

Carpet/Bare
Floor Selector

Floor Nozzle

Available online at www.vacmaster.com or call [phone].

-5-

GENERAL ASSEMBLY INSTRUCTIONS

WARNING!

DO NOT plug into electrical supply until assembly is complete. Failure to do so
could result in electrical shock or injury.

1. Insert the hose into the canister with the hose release button upward until you
hear a click. To remove, press button on the hose stopper and pull out.

IMPORTANT: Push the hose rmly into the canister until the hose latch tab snaps

into place.

2. Insert the telescoping wand into the handle and press together tightly.

3. Push and snap the attachment holder onto the wand.

Attachment Holder

-6-

4. Insert the desired accessories into the wand and press together tightly .

5. This vacuum cleaner is equipped with onboard attachment storage. The
dusting brush and crevice tool are stored in the attachment holder as shown.

Dusting Brush

Crevice Tool

OPERATING INSTRUCTIONS

Using Your Vacuum Cleaner

Note: Make sure the vacuum cleaner is completely assembled and the dust cup

is empty before using. Do not use vacuum cleaner without lters in place.

1. Pull cord out of canister to desired length.
Note: The yellow mark on the power cord shows the ideal cord length. Do not
extend the power cord beyond the red mark.

Red Mark

Yellow Mark

-7-

2. Plug the power cord into an outlet located near the oor.

WARNING

To reduce the risk of electric shock, this vacuum cleaner has a polarized plug

(one blade is wider than the other). This plug will t in a polarized outlet only
one way. If the plug does not t fully in the outlet, reverse the plug. If it still does
not t, contact a qualied electrician to install the proper outlet. Do not change

the plug in any way.

3. Press the on/off switch to turn the vacuum on.

On/Off Switch

Cord Rewind Button

4. Once you have completed vacuuming, press the on/off button to turn the
vacuum off and unplug the power cord from the outlet. Then press the cord
rewind button to rewind the power cord.

Note:

• Guide the cord with one hand to ensure that it does not whip causing damage.

• It is recommended to rewind the cord fractionally 3-4 times to avoid personal
injury or the cord getting stuck.

• When the cord is stuck, pull the cord out and depress the cord rewind button
to rewind the cord. Do not over-pull the cord.

-8-

WARNING

• The cord moves rapidly when rewinding. Keep children away and provide a
clear path when rewinding the cord to prevent personal injury.

• DO NOT use outlets above counters. Damage from cord to items in
surrounding area could occur.

Using the Attachments

• Floor Nozzle

Use the standard setting for carpet cleaning. Depress the carpet/bare oor
selector to transition to bare oor cleaning.

For Carpet For Bare Floor

Carpet/Bare Floor Selector

• Telescoping Wand
Adjust the length of the wand to your desired height by pushing the slider adjust
button.

Wand Adjust Button

• Hose
Slide the suction control valve to change vacuum cleaner suction for different
fabric and carpet weights. Opening the valve decreases suction for lightweight
rugs. Closing the valve increases suction for upholstery and carpets.

Increase Suction

Suction Control Valve

Decrease Suction

-9-

• Crevice Tool: For vacuuming edges and gaps.

• Dusting Brush: For vacuuming fragile or easily scratched items, such as
furniture and drapes.

Note:

tool or the dusting brush into the hose directly.

You can also choose to use your vacuum cleaner by inserting the crevice

Storing Your Vacuum

1. This vacuum provides two ways of storage.

1) The oor nozzle stores into the slot located on the back of the canister as

shown in Figure A.

2) With the oor nozzle attached, the telescoping wand stores into the slot

located on the bottom of the canister as shown in Figure B.

2. Store crevice tool and dusting brush in attachment holder located on the
telescoping wand.

3. Press the cord rewind button to rewind the power cord.

4. Store the vacuum cleaner in a dry, indoor area.

A B

-10-

MAINTAINING YOUR VACUUM

CAUTION

To reduce the risk of shock, disconnect the power cord, and turn off before
performing any service or maintenance.

Emptying the Dust Cup
Note:

vacuum cleaner without dust cup and lter in place.

1. Press the dust cup release button as shown to separate the dust cup & lters

2. Hold the handle and position the dust cup over a waste receptacle. Press the

For best performance, empty dust cup after every use. Never operate

from the canister.

Dust Cup Release Button

dust release button to open dust cup lid and allow contents to drop into waste
receptacle.

Dust Release Button

3. Reinstall and insert the dust cup into the main body until you hear a click.

-11-

Cleaning the Filters

Clean the HEPA Filter & Air Outlet Filter

1. Press the dust cup release button as shown to separate the dust cup & lters

from the canister.

2. Open the air outlet lter holder and separate the air outlet lter from the holder.

3. Rotate the HEPA lter counterclockwise to unlock it from the canister for

cleaning.

4. Before cleaning, remove the dust wrap from the HEPA lter. Use a soft brush
to remove loose debris from lters then rinse with warm water. Rinse and
gently squeeze to dry the lters. Set lters aside and allow to air dry for 24

hours.

HEPA Filter Dust Wrap Air Outlet Filter

-12-

IMPORTANT

5. Place the air outlet lter back onto the air outlet lter holder. Then reinstall the
HEPA lter with dust wrap into the dust cup by rotating clockwise.

6. Ensure the air outlet lter holder clicks into place and then place the dust cup

back to the canister.

: The lters must dry completely before reuse.

Clean the Exhaust Foam Filter

1. Press the latches down to release the exhaust foam lter cover from the

canister.

Latches

2. Remove the exhaust foam lter from the canister. Use a soft brush to remove
loose debris from lters then rinse with warm water. Rinse and gently squeeze
dry the foam lter. Set both lters aside and allow to air dry for 24 hours.

-13-

3. Reinstall the exhaust foam lter cover by inserting the two tabs on the cover

into the slots at the bottom of the canister. Then press the cover into place and
ensure the release latches snap into place until you hear a click.

slots

Checking and Removing Clogs

For best cleaning results, keep the airow passage open. Check the following

areas occasionally for clogs. Turn off and unplug vacuum cleaner from outlet
before checking.

1. Turn off the vacuum cleaner. Separate the oor nozzle from the telescoping

wand.

2. Separate the hose from the telescoping wand and turn vacuum cleaner on.
Check the end of the hose for suction. If there is good suction on the hose
handle, there is no clog in the hose. If the suction is low, remove any dirt or
debris in the hose and handle.

3. Check the wand and remove any dirt or debris in the wand.

4. Check oor nozzle swivel and inlet port. Remove any dirt or debris.

-14-

TROUBLESHOOTING

Vacuum will not

Be sure power cord plug is fully plugged

Purchase online at www.vacmaster.com

hose and dust cup for clogs and remove

The hose is not inserted into the

Purchase online at www.vacmaster.com

Should you have any problem(s) with your vacuum cleaner, review the table
below for solutions to minor performance issues.

WARNING

Disconnect electrical supply before performing maintenance to the vacuum
cleaner. Failure to do so could result in electrical shock or personal injury.

PROBLEM POSSIBLE CAUSE SOLUTION

The plug is not plugged to the

wall outlet.

The vacuum is not turned on.

power on.

The vacuum body is overheated.

The vacuum is damaged. Call [phone] for assistance.

into outlet.

Press the on/off switch to turn the

vacuum on.

Unplug the power cord and let the

vacuum cool down for 50 minutes.

Dust cup is full.

Filters need cleaning.

Filters need to be replaced.

The job of

dirt pick-up

is poor or

suction power

is weak.

There is a clog in the vacuum.

Dust cup is not installed well.

canister well.

The hose is damaged.

The vacuum is damaged. Call [phone] for assistance.

Empty dust cup. Follow instructions on

page 11.

Follow lter cleaning instructions on

page 12.

or call [phone].

Check the nozzle, telescoping wand,

accordingly.

Check dust cup for correct installation

and ensure it is snapped rmly in place.

Follow instructions on page 13.

Check the hose for correct installation

and ensure it is snapped rmly in place.

or call [phone].

-15-

Dust escapes

Purchase online at www.vacmaster.com

from vacuum.

Filter is missing or installed

incorrectly.

Filter is damaged and needs to

be replaced.

Power cord is dirty Clean the power cord.

Check lter for correct installation.

or call [phone].

Cord won’t

rewind

Power cord is jammed. Pull out the power cord and rewind it.

The cord rewind is damaged. Call [phone] for assistance.

For further questions, call our support team at [phone].

-16-