Exacting Standards, Just Like yours, since 1948
Bowl Cutter
BC14
16”
406mm
Dimensions:
Overall width: 28” (711mm)
Overall length: 18” (457mm)
Overall Height: 16” (406mm)
Shipping Information:
Freight Class: 85
Net Weight: 82 lb. (37Kg)
Shipping Weight: 91 lb. (41Kg)
Shipping Box Dimensions:
Height: 18” (457mm)
Width: 32” (813mm)
Length: 25” (635mm)
Printed in the USA 10/09
Univex Corporation
www. Univexcorp.com
3 Old Rockingham Rd Salem, NH 03079 USA
Telephone (800) 258-6358 Fax: (800) 356-5614
Intl Tel. (603) 893-6191 Int’l Fax: (603) 893-1249
18”
457mm
28”
711mm
Electrical:
115V,60HZ,1PH
Other voltages available at no
additional charge:
208-240V,60HZ,1PH
220-240V,50HZ, 1PH
208-240V, 60HZ, 3PH
220V, 50HZ, 3PH & 380V, 50HZ, 3PH
Motor:
1/2 HP capacitor start with starting
relay. Speed 1725 RPM, ball bearing
shaft.
Drive:
Knife shaft, ball bearing mounted,
driven at 1725 RPM by a 8-ribbed
poly “V” belt.
Knife Blades:
Cutlery stainless steel, 3500 cuts per
minute.
Bowl:
14” (356mm) diameter, polished, die
drawn, 304 stainless steel, 1:16 ratio
driven at 24 RPM with “O” ring belt
pulley reduction with 45:1 worm gear
reduction.
Housing and Bowl Cover:
Cast aluminum. Polished and
anodized.
Switch:
DPST pull / push on off.
Circuit Breaker:
6.0 amp manual reset.
Cord and Plug:
3-wire, 16 gauge, 5ft. (1524mm) long
SJT cord with 3 prong molded plug.
Safety Features:
1. Bowl cover interlock prevents
running when the cover is not
closed and locked.
2. Bowl sensing switch prevents
operating without the bowl.
Optional Accessories:
The following are available at an extra
cost:
1000450 Cover: Heavy-duty clear
plastic cover.