Univex 7236L, 7236LC, 7236L.002 User Manual
LIFETIME™ 6' X 36"
Comfortable bathing design with form-tted backrest
and molded-in armrests.
❏ Model# 7236L (specify color)
• Acrylic with berglass reinforcement
• Lifetime Overow Drain for maximum
water depth
• 2.1 HP self-draining pump/motor
• Ten ow adjustable jets including:
Two adjustable Ideal Flow Comfort Jets™
Eight adjustable Comfort Jets™
• Three silent air volume controls
• Side-mounted On/Off control
• Complete factory installed and tested
whirlpool system
• Self leveling feet
• Designed with undermount installation option
❏ Model# 7236LC (specify color)
• Same as above with the EverClean™ whirlpool
system. The EverClean™ antimicrobial system
incorporates AlphaSan®, a patented
antimicrobial agent manufactured right into the
circulation system components, which
suppresses the growth of unsightly algae,
fungus, mold and mildew.
❏ Model# 7236L.002 Bathing Pool Only
LIFETIME™ 6' X 36"
WHIRLPOOLS BY AMERICAN STANDARD
HIGH GLOSS ACRYLIC
Components Required:
❏ Bath Filler*: (specify nish)
❏ Bath Drain: 1599.205.XXX (specify color)
OR 1599.500.020 (white only)
Nominal Dimensions:
72” x 36” x 21-1/4”
(1829 x 914 x 540mm)
Compliance Certications Meets or Exceeds the Following Specications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS
AlphaSan® is a registered trademark of Milliken & Co.
© 2007 American Standard Inc.
Custom Accessories Available:
❏ Six Foot Apron: 9271.019.XXX (specify color)
❏ E-Z-Install™ Whirlpool Heater - EZHEAT-100
❏ Tile Bead Kit: TILE-BEAD
* See American Standard Faucet Selector
For color/nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
NOTE: E-Z-Install™ Whirlpool Heater is designed to
maintain water temperature during operation. It will not heat
cold water to desired bathing temperature.
HD-3
Revised 7/07
LIFETIME™ 6' X 36"
72"
(1829mm)
36"
(914mm)
7-3/4"
(197mm)
11"
(279mm)
36"
(914mm)
3"
(76mm)
6"
(152mm)
13-3/4"
(349mm)
CUT OUT IN FLOOR
FOR DRAIN
21-1/2"(H)
(546mm)
20"(C)
(508mm)
20-1/8"(A)
(511mm)
DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE
OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.
C/L OF
OVERFLOW
GENERAL SPECI FICATI ONS FO R 7236 L WHIR LPOOL
WHIRLPO OL ELE CTRICA L SPEC IFICAT IONS
PUM P
72 x 3 6 x 21 -1/2 In. (1 829 x 914 x 546mm )
106 Lb s. (48 Kg.)
1031 L bs. (4 67 Kg.)
111 Ga l. (42 0 L)
53 Gal . (201 L)
53-1/2 x 26- 1/4 In. (13 59 x 6 67mm)
64-1/2 x 30 In. (1638 x 762mm )
18-1/2 In.(4 70mm)
57 Lb s./Sq. Ft. (280 Kg s./Sq. m)
2.1 H P, 14 .4 A MP S, 12 0V.
INS TA LL ED S IZ E
WEI GH T
WEI GH T w/ WA TE R
GAL . TO O VE RF LO W
WHI RL PO OL M IN . OP ER ATING V OL .
BAT HI NG W EL L AT S UM P
BAT HI NG W EL L AT R IM
WAT ER D EP TH T O OV ER FLOW
FLO OR L OA DI NG
(PR OJ EC TE D AR EA )
WHIRLPOOLS BY AMERICAN STANDARD
HIGH GLOSS ACRYLIC
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA T YPE INSTALLATION. SUMP OF BATH IS
SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS.
■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL, DECK MOUNTED SPOUT AND INTEGRATED BATH FILLER FOR
ADDITIONAL INFORMATION.
OPTIONAL 3-WALL TILING BEAD KIT No. TILE-BEAD AND APRON No. 6F T-APRON MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING SYSTEM
PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1
These measurements are subject to change or cancellation. No responsibilit y is assumed for use of superseded or voided leaet.
© 2007 American Standard Inc.
HD-4
Revised 7/07
Loading...