Exacting Standards, Just Like yours, since 1948
PrepSaver™ Slicers
4509, 4510 & 4512
Model: 4509 4510 4512
A Overall height: 14 1/2” 15” 16”
B Base width: 13 1/2” 13 1/2” 13 1/2”
C Overall width: 17” 17” 17”
D Base length: 17” 17” 17”
E Overall length: 20” 20” 22”
Installed footprint: 13 1/2” Wide X 17” Deep
Net weight: 39 Lbs. 40 Lbs. 45Lbs.
Shipping Weight: 45 Lbs. 46 Lbs. 55 Lbs.
Box:
4509 & 4510: 20” Wide X 24” Deep X 18” High
Cubic measure: 5 ft.
3
4512: 24” Wide X 28” Deep X 22” High
Cubic measure: 8.5 ft.
3
Slice Thickness:
Infinitely variable, 0 to 1/2”
Max Product Size:
Model 4509:
Round 6 1/2”
Rectangular 6” high by 8” wide
Model 4510:
Round 7 1/4”
Rectangular 6 1/2” high by 8” wide
Model 4512:
Round 8”
Rectangular 6 3/4” high by 8” wide
Carriage:
Model 4509:
Stroke length 9”, carriage length 9”
Model 4510:
Stroke length 9”, carriage length 9”
Model 4512:
Stroke length 9”, carriage length 9”
Blade: German hollow-ground, chrome
plated high carbon, hardened
steel. Belt driven.
Model 4509: 9”, 650 rpm
Model 4509: 10”, 650 rpm
Model 4509: 12”, 425 rpm
Motor: Caracitor start, capacitor run.
Model 4509:
1/4 hp, 1.6 amp draw, 1680 rpm
Model 4510:
1/4 hp, 1.6 amp draw, 1680 rpm
Model 4512:
1/3 hp, 1.9 amp draw, 1680 rpm
Controls:
Manual operation. ON/OFF toggel switch.
Slice thickness dial.
Electrical:
115V, 60HZ, 1PH. Cord supplied.
Consult manufacturer for special
voltages.
Construction:
Polished anodized aluminum. Permanent
blade edge guard. Built-in meat holder.
Hygiene / Maintenance:
Removable carriage and circular blade
guard. Built-in sharpener.
Recommended Maximum Duty:
1 to 2 hours per day.
Optional Accessories:
The following are available at an extra cost
1000450 Small to medium heavy-duty
clear plastic slicer cover.
Printed in the USA 09/09
Univex Corporation
www. Univexcorp.com
3 Old Rockingham Rd Salem, NH 03079 USA
Telephone (800) 258-6358 Fax: (800) 356-5614
Intl Tel. (603) 893-6191 Int’l Fax: (603) 893-1249
D
E
A
B
C