Universal Remote Control UR5L-8500L Programming Manual

Button Functions

Programming the Remote Control

There are three ways you can program your

CLIKRTM-5

remote:

The Pre-Programmed 3-Digit Code Method

The Auto-Search Method

The Learning Method

The Pre-Programmed Code Method allows you to setup all the buttons at once by entering 3-digit code numbers that correspond to a particular Component’s manufacturer/brand, so it’s the fastest and easiest of the three methods. (Code Tables are on the backside of this Instruction Sheet.) The Auto-Search Method scans through all the codes in the remote control, one at a time. The Learning Method allows you to transfer functions from other remotes, one button at a time.

IMPORTANT SETUP NOTE!

This pertains to all programming steps. When you are in setup mode, a component LED will light for 30 seconds.If you do not press a button within 30 seconds, the LED light will turn off and exit setup mode and you will need to start over.

A. Pre-Programmed 3-Digit Code Method

STEP1 Turn on the Component you want to program (TV, VCR, DVD or AUX) using your old remote.

STEP2 Press the [COMPONENT] button (TV, VCR, DVD or AUX) to be programmed and [OK/SEL] button

simultaneously for 3 seconds. The Component LED light will turn on for 30 seconds indicating the unit is ready to be programmed.

STEP3 Point the remote control toward the

Component and enter the 3-digit code number assigned to your brand.

*Note :

If the 3-digit code number you just entered is correct, the Component will turn Off. If it did not turn Off, continue entering code numbers listed for that brand until the Component turns Off.

STEP4

After you’ve entered the correct code number and the Component has turned Off, press the [POWER] button to turn the Component back On. Now it’s time to test the VOLUME and MUTE buttons for the TV (or PLAY and STOP buttons for VCR and DVD) to make sure they all work. If any of the functions do not work as they should, repeat from STEP 3 using the next 3-digit code number listed for that brand.

STEP5

Once you have found the correct 3-digit code, save it by pressing the same [COMPONENT] button one more time. The Component LED light will blink twice to confirm that the code was successfully stored.

Now, program the rest of your Components by repeating STEPS 1-5

*Note : If the Pre-Programmed Method did not

work, or if the Code Tables do not list your Component brand, use the Auto-Search Method as explained in Section B.

B. Auto-Search Method

STEP1 Turn on the Component you want to

program (TV, VCR, DVD or AUX) using your old remote.

STEP2 Press the [COMPONENT] button (TV, VCR,

DVD or AUX) to be programmed and [OK/SEL] button simultaneously for 3 seconds. The Component LED light will turn on for 30 seconds indicating the unit is ready to be programmed.

STEP3 Point the remote toward the Component and

press the [CH] or [CH] button one step at a time or keep it pressed. The remote will emit a series of ON/OFF commands. Release the [CH] or [CH] button as soon as the Component turns Off.

STEP4 Test functions. (Same as for 3-Digit Code

Programming Method - Section A). If any of the functions do not work as they should, repeat from STEP 3 using [CH] or [CH] buttons to find the correct code.

STEP5 Save the code. (Same as for 3-Digit Code

Programming Method - Section A).

Now, repeat the Auto-Search Method for those Components you could not program earlier with the Pre-Programmed Method. If you can’t find the right code using the Auto-Search Method, try the Learning Method in Section C.

C. The Learning Method

STEP1 Press the [COMPONENT] button (TV, VCR,

DVD or AUX) to be programmed and the [ # ] buttons simultaneously for 3 seconds until the Component LED light turns on.

STEP2 Line up the CLIKR

-5 to the other remote,

head-to-head, 1 or 2 inches apart.

STEP3 Press any button on the CLIKRTM-5 that you

want to teach a command to. For example, if you want to teach the [MUTE] button, press the [MUTE] button.

STEP4 Press and hold the [MUTE] button on the

other remote until the CLIKR

-5 Component

LED light blinks twice.

*Note : The LED will blink 5 times if there was an

error in the learning process. In so, repeat STEPS 3 and 4. Continue learning other buttons by repeating STEPS 3 and 4.

STEP5 Once you have completed teaching

CLIKR

-5 all desired commands for that

Component, save the learned commands by pressing the [COMPONENT] and [ # ] buttons simultaneously until the Component LED blinks 3 times. Now test all the buttons to make sure they learned correctly.

D. Erasing a Single Learned Command

STEP1 Press the [COMPONENT] and [ # ]

buttons simultaneously for 3 seconds until the Component LED light turns on.

STEP2 Press and hold the button you want to erase

for 3 seconds. The Component LED will blink twice to confirm the erasure.

STEP3 To exit, press and hold both the

[COMPONENT] and [ # ] buttons simultaneously until the Component LED blinks 3 times.

E. Erasing All Learned Commands from One Component

STEP1 Press the [COMPONENT] and [ # ] buttons

simultaneously for 3 seconds until the Component LED light turns on.

STEP2 Press and hold both the [COMPONENT]

button you want to erase and the [PAUSE] button for 3 seconds. The Component LED will blink twice to confirm the erasure.

STEP3 To exit, press and hold both the

[COMPONENT] and [ # ] buttons simultaneously until the Component LED blinks 3 times.

F. Finding a Component Button’s Setup Code Number

If you used either the Auto-Search or Learning Methods to program a Component, you may not know what the correct code number is. Here is a way for you to identify the code number, so you can record it for future reference.

STEP1

Press the [COMPONENT] button (TV, VCR, DVD or AUX) you want to verify and the [OK/SEL] button simultaneously for 3 seconds. The Component LED light will turn on for 30 seconds.

STEP2

Press the [INFO] button and count the number of times the Component LED light blinks. This number indicates the first digit of the code, followed by the second and third, each separated by a one second pause when the LED will turn off.

Universal Remote Control, Inc.

www.universalremote.com

OCE-0045G REV 04 (04/10/07)

UR5L-8500L

Operating Instructions For

CLIKR™-5

Cable Remote Control

The

CLIKRTM-5

UR5L-8500 is designed to operate all Scientific-Atlanta, Pioneer Voyager and Pace Micro digital set top boxes (including DVR & HD), plus the majority of TV, VCR, DVD and AUDIO equipment on the market as shown below.

CABLE : Cable Converters TV : Televisions VCR : VCRs and TV/VCRs DVD: DVD Players AUX : Audio Receivers and DVRs, etc.

Introduction

DEFAULT STATE:

Component Default: CABLE Channel Default: CABLE channel and

numbers operate through the CABLE. You have the option of controlling channel and numbers through the TV, VCR or DVD. Refer to section I for programming steps.

Volume Default: CABLE volume and mute operate through the TV. You have the option of controlling volume and mute through the Cable box, VCR or DVD. Refer to section J for programming steps.

Operations

Replacing Batteries

Before you program or operate the remote control, you must install two new AA alkaline batteries.

STEP1 Remove the battery compartment cover

on the back of your remote control.

STEP2 Check battery polarity carefully, and

install the batteries as shown in the illustration below.

STEP3 Replace the battery compartment cover.

STEP2

Press the [VOL ] button.

STEP3

Press the [TV] button again. The Component LED will blink twice to confirm the programming.

To return to original state:

If you wish to restore the CABLE channel control in TV mode, repeat the above steps but press [CBL] in

STEP3

J. Programming Volume Control

You can program the volume controls (Volume Up, Volume Down and Mute) from one Component to operate in another Component mode. Default volume control settings on the remote control are as follows:

CBL :TV T V :TV VCR :TV DVD :TV AUX : AUX

If you wish to store the CBL volume control in CBL mode, use the following steps.

STEP1

Press the [CBL] button and the [OK/SEL] button simultaneously for 3 seconds. The [CBL] Component LED will turn on for 30 seconds.

STEP2

Press the [VOL ] button.

STEP3

Press the [CBL] button. The Component LED will blink twice to confirm the programming.

To return to original state:

If you wish to restore the TV volume control in CBL mode, repeat the above steps but press [TV] in

STEP3

K. Programming a ‘Macro’ or Favorite Channel

In CBL mode, the M1, M2 and HELP buttons can be programmed to act as a ‘Macro’ or Favorite Channel button. This allows you to send up to 10 commands with one button press.

STEP1

Press the [CBL] button to select the CBL mode.

STEP2

Press the [M1,M2 or HELP] button and [OK/SEL] button simultaneously for 3 seconds. The [CBL] Component LED will turn on for 30 seconds.

STEP3

Press up to 10 buttons you wish to store. The [CBL] Component LED will blink once for each command entered.

STEP4

Press the [CH] button to store the commands that were selected. The [CBL] Component LED will blink twice to confirm the storage of commands.

L. Low Battery Warning

When the batteries are low and need to be replaced with fresh batteries, the Component LED lights will blink 2 times in sequence whenever a [POWER] button is pressed to turn on equipment.

M. Memory Lock System

This remote control is designed to retain programmed memory for 10 years even after batteries are removed from the remote control.

N. Record Your Component Set-up Codes

TV Set-up Code Number: VCR Set-up Code Number: DVD Set-up Code Number: AUX Set-up Code Number:

*Note

: 10 blinks represents the number zero.

Example : One blink, (pause), eight blinks, ( pause) and

three blinks, indicates code number 183.

G. AUX Function: Programming a 5

Component

You can take advantage of the AUX function to program a 5

Component such as a second TV, VCR, DVD or Audio Component.

STEP1

Turn on the 5thComponent you want to program (TV, VCR, DVD or Audio) using your old remote.

STEP2

Press the [AUX] button and the [OK/SEL] button simultaneously for 3 seconds.The [AUX] Component LED will turn on for 30 seconds.

STEP3

Press the [COMPONENT] button you want to setup. Point the remote control toward the Component and enter the 3-digit code number assigned to your brand.

*Note

: If the 3-digit code number you just entered is the

correct number, the Component will turn Off. If it did not turn Off, continue entering code numbers listed for that brand until the Component turns Off.

STEP4

Test functions. (Same as for 3-Digit Code Programming Method - Section A). If any of the functions do not work as they should, you need to find a new code.

STEP5

Once you have found the correct 3-digit code, save it by pressing the [AUX] button one more time. The Component LED light will blink twice to confirm the code was stored. Now when you press the AUX button, all the buttons will work with that 5

Component.

H. Programming the System On/Off Button

This allows you to program the System On/Off button so it can send up to five power On/Off commands with one button press.

STEP1

Press the [CBL] button.

STEP2

Press the [SYSTEM ON/OFF] button and the [OK/SEL] button simultaneously for 3 seconds. The [CBL] button will turn on for 30 seconds.

STEP3

Press the first [COMPONENT] button you want to store in the [SYSTEM ON/OFF] button and then the [POWER] button. Repeat this for other Components until you have stored all the desired power commands into the [SYSTEM ON/OFF] button.

STEP4

Press the [CH] button to save the power commands you stored. The [CBL] button will blink twice to confirm the commands have been saved.

I. Programming Channel Control

You can program the channel controls (Channel Up, Channel Down and Last) from one Component to operate in another Component mode. Default channel control settings on the remote control are as follows:

CBL : CBL T V : CBL VCR : CBL DVD :DVD AUX :AUX

If you wish to store the TV channel control in TV mode, use the following steps.

STEP1

Press the [TV] button and the [OK/SEL] button simultaneously for 3 seconds. The [TV] Component LED will turn on for 30 seconds.

Tabla de Códigos de Instalación.

Manufacturer/Brand

Set-Up Code Number

VCR-TV/VCR

GIBRALTER 116 073 GOLDSTAR 113 116 102 363 106 112 127 143 GRUNPY 028 043 HALL MARK 363 HARLEY DAVIDSON 028 HARVARD 043 HAVERMY 081 HELLO KITTY 076 HIMITSU 043 HISENSE 419 HITACHI 011 166 009 010 012 023 075 143 158 072 363 HP 378 316 327 421 INFINITY 164 INFOCUS 333 INSIGNIA 350 400 052 164 403 INTEQ 073 JANEIL 002 JBL 164 JCB 001 JCPENNEY 024 116 008 009 030 065 101 143 160 363 JENSEN 013 JVC 038 034 001 083 199 210 KAWASHO 116 001 KEC 043 KENWOOD 116 001 KLEGG 466 KLOSS 002 059 KLOSS NOVABEAM 002 KMC 143 KTV 043 116 143 154 KURAZAI 072 LG 363 113 116 102 106 112 127 143 LODGENET 072 LOEWE 164 LOGIK 072 LUXMAN 363 LXI 166 007 052 251 160 164 138 MAGNAVOX 164 059 116 003 060 061 363 127 022 160 094

226 390 MAJESTIC 333 072 MARANTZ 116 164 MATSUI 164 MATSUSHITA 080 MAXENT 242 MEGATRON 116 011 MEMOREX 007 072 363 METZ 088 MGA 116 363 024 028 042 MIDLAND 333 073 MINERVA 088 MINTEK 362 MINUTZ 008 MITSUBISHI 124 109 024 028 040 042 146 191 363 MONTGOMERY WARD 333 072 MOTOROLA 081 MTC 116 363 101 MULTITECH 043 NAD 025 138 NEC 272 197134 116 040 016 024 056 019 262 NET TV 242 NIKEI 043 NIKKO 116 NTC 103 NUVISION 351 OLEVIA 432 363 333 160 ONKING 043 ONWA 043 OPTIMUS 025 OPTONICA 019 251 OPTOMA 265 ORION 096 PANASONIC 080 034 056 164 208 PHILCO 116 003 059 060 164 363 024 056 PHILIPS 164 005 093 038 116 003 363 059 127 206 431 PILOT 116 PIONEER 234 135 025 018 023 116 393 272 POLAROID 388 PORTLAND 363 143 PRISM 034

PROSCAN 160 333 PROTON 363 112 058 143 171 172 PROTRON 392 398 PULSAR 116 073 QUASAR 034 056 RADIO SHACK 019 363 143 043 127 RCA 333 160 065 116 363 024 056 152 023 074 REALISTIC 007 019 043 047 ROCTEC 186 RUNCO 182 073 395 416 072 SAMPO 116 058 363 242 SAMSUNG 258 050 089 101 105 363 127 143 160 228 229 SAMSUX 116 SANSEI 076 SANSUI 096 SANYO 166 007 020 053 057 082 187 SCEPTRE 276 SCOTCH 116 SCOTT 028 043 363 048 143 SEARS 030 363 007 028 057 143 094 160 082 166 138 SELECO 205 011 SHARP 251 019 014 028 029 363 022 143 175 SHENG CHIA 081 SHOGUN 116 SIEMENS 088 SIGNATURE 072 SIMPSON 003 SOLE 231 232 SONY 001 139 126 SOUNDESIGN 028 363 003 043 SPECTRICON 112 SQUAREVIEW 052 STARLITE 043 SSS 363 043 SUPRA 116 SUPRE MACY 002 SUPREME 001 SVA 328 SYLVANIA 116 003 052 059 060 164 044 160 127 SYMPHONIC 052 SYNTAX OLEVIA 432 363 333 160 TANDY 251 TATUNG 056 TECHNICS 034 080 TECHNOL ACE 028 TECHWOOD 363 TEKNIKA 002 003 363 024 028 043 072 101 143 TELEFUNKEN 037 046 TELERENT 072 TERA 172 TMK 363 TNCI 073 TOSHIBA 138 030 007 040 101 325 TOTEVISION 143 TVS 096 UNIVERSAL 008 009 VICTOR 038 VIDEO CONCEPTS 146 VIDIKRON 174 164 188 192 VIDTECH 363 VIEWSONIC 242 389 VIKING 002 VIZIO 386 387 WARDS 363 008 009 019 028 060 061 072 074 143 164

034 WAYCON 015 WESTINGHOUSE 076 280 435 001 YAMAHA 116 363 YORK 363 YUPITERU 043 ZENITH 363 073 072 095 103 ZONDA 112

ADMIRAL 025 053 ADVENTURA 034

Manufacturer/Brand

Set-Up Code Number

Manufacturer/Brand

Set-Up Code Number

Manufacturer/Brand

Set-Up Code Number

Manufacturer/Brand

Set-Up Code Number

VCR

Manufacturer/Brand

Set-Up Code Number

VCR

Manufacturer/Brand

Set-Up Code Number

VCR-TV/VCR

Manufacturer/Brand

Set-Up Code Number

DVD

Manufacturer/Brand

Set-Up Code Number

AUX-AUDIO

PENTAX 020 020 145 PHILCO 034 067 145 PHILIPS 067 034 101 054 071 156 145 PILOT 101 PIONEER 021 020 048 PORTLAND 108 PROFITRONIC 040 PROTEC 024 PULSAR 072 QUARTZ 002 014 QUASAR 066 145 RADIO SHACK 123 RADIX 101 RANDEX 101 RCA 107 109 144 147 041 145 020 034 102 REALISTIC 003 008 010 014 034 053 054 101 145 102 RICO 058 RUNCO 148 SALORA 014 SAMSUNG 102 113 115 120 032 066 107 109 125 SANKY 053 SANSUI 022 043 048 SANYO 003 010 014 102 SCOTT 017 037 120 129 131 SEARS 003 008 010 014 020 101 009 017 073 112 SHARP 053 054 165 145 SHINTOM 024 SHOGUN 040 SIGNATURE 034 SINGER 024 SONY 001 057 058 052 003 076 053 154 145 SOUNDESIGN 034 STS 020 SYLVANIA 034 059 067 145 SYMPHONIC 034 TANDY 010 034 TATUNG 039 043 TEAC 034 039 043 TECHNICS 070 145 TEKNIKA 019 034 101 145 THOMAS 034 TMK 006 TOSHIBA 131 008 059 047 082 020 120 TOTEVISION 101 102 UNITECH 102 VECTOR RESEARCH 012 VICTOR 048 VIDEO CONCEPTS 012 034 046 VIDEOSONIC 102 VILLAIN 034 WARDS 003 020 017 024 034 053 054 131 145 102 WESTINGHOUSE 024 025 XR-1000 024 034 145 YAMAHA 012 034 039 043 ZENITH 072 080 056 048 101 034 058

AMERICA ACTION 117 DAEWOO 005 117 EMERSON 153 FUNAI 034 GOLDSTAR 101 123 HARLEY DAVIDSON 034 HITACHI 034 JCPENNEY 101 LG 101 123 LLOYD 034 MAGNAVOX 034 067 MEMOREX 101 PANASONIC 070 167 PHILIPS 034 067 RADIO SHACK 123 RCA 034 144 SEARS 101 SONY 057 154 SYLVANIA 067

CARVER 006 028 061 071 201 214 226 185 013 077 284 CITATION 148 CLARION 026 DELPHI 556 DENON 109 215 230 234 330 340 679 ELAN 057 290 ENLIGHTENED AUDIO 099 098 ESCIENT 451 FISHER 214 182 FLEXTRONICS 378 FOSGATE AUDIONICS 148 342 GOLDSTAR 008 HARMAN KARDON 148 233 077 028 118 318 HITACHI 020 INSIGNIA 589 INTEGRA 275 017 046 108 080 209 JAMO 398 JCPENNEY 216 JVC 163 191 114 279 291 KENWOOD 026 066 145 192 182 005 280 374 KLH 331 KOSS 216 573 KRELL 072 384 672 LEXICON 120 235 236 237 357 360 LINN 124 377 LUXMAN 009 139 052 165 115 004 MAGNAVOX 086 164 152 077 MARANTZ 006 028 031 040 063 185 186 265 289 492 MCINTOSH 238 286 MERIDIAN 100 012 013 628 MITSUBISHI 242 204 MONDIAL 157 158 042 043 081 112 MYRYAD 077 NAD 186 113 NAKAMICHI 040 244 245 172 183 287 NEC 176 NIRO 343 NILES 403 ONKYO 275 017 046 108 080 209 OPTIMUS 026 041 OUTLAW 342 PANASONIC 032 195 219 177 292 626 PARASOUND 129 130 132 261 294 295 333 334 PHILIPS 249 250 063 PIONEER 014 039 044 069 168 116 035 063 198 480 556 POLKAUDIO 515 PROCEED 144 268 RCA 010 048 117 156 067 288 REALISTIC 019 073 075 095 ROTEL 074 083 085 654 SAMSUNG 016 653 SANSUI 040 048 110 063 065 228 SANYO 214 SCOTT 019 SHARP 026 094 175 652 SHERWOOD 024 102 106 447 370 SIRIUS 555 SONY 001 018 247 248 166 101 184 218 271 380 SOUNDESIGN 036 SUNFIRE 344 345 182 TEAC 005 019 049 040 212 217 TECHNICS 122 176 193 219 178 177 200 257 262 THETA DIGITAL 136 TOSHIBA 060 087 198 278 XM SATELLITE RADIO 556 YAMAHA 026 253 169 067 173 205 264 232 089 264 274 ZENITH 143 210

HUGHES 817 HUMAX 817 PHILIPS 790 817 RCA 809 REPLAY NETWORKS 775 SONY 804 805 TIVO 790 817 TOSHIBA 817

Manufacturer/Brand

Set-Up Code Number

AUX-DVR(TIVO)

SYMPHONIC 034 THOMAS 034 ZENITH 034

AIWA 146 AKAI 281 ALLEGRO 091 ALPINE 098 APEX DIGITAL 087 111 115 BLAUPUNKT 111 BROKSONIC 130 CINEVISION 091 COBY 260 CYBERHOME 271 DENON 080 173 138 DURABRAND 091 DVD 2000 017 EMERSON 091 143 ENTERPRISE 074 FISHER 147 FUNAI 143 GE 027 GOLDSTAR 091 GO VIDEO 137 091 220 221 222 GREENHILL 111 HARMAN KARDON 084 140 HITACHI 101 HITEKER 087 ILO 268 INITIAL 111 INTEGRA 142 180 280 JBL 084 JVC 012 KENWOOD 151 KISS 279 KLH 135 KRELL 104 LITEON 264 265 LEXICON 148 LG 091 057 074 MAGNAVOX 066 096 MARANTZ 105 066 MALATA 267 MERIDIAN 153 MICROSOFT 027 206 MINTEK 111 282 MITSUBISHI 017 MYRYAD 102 134 NAD 088 NAKAMICHI 103 NESA 111 ONKYO 076 141 180 OPTIMUS 023 OPPO 266 ORION 130 PANASONIC 144 150 285 138 PHILIPS 066 105 276 PHILIPS MAGNAVOX 141 066 PIONEER 099 023 131 POLAROID 233 POLK AUDIO 141 066 PROCEED 086 PROSCAN 027 RCA 027 RIO 091 RJTECH 269 SAMSUNG 056 070 165 137 159 275 SANSUI 154 SANYO 147 SEARS 130 SENSORY SCIENCE 222 SHARP 094 SHINSONIC 033 SONIC BLUE 091 SONY 001 033 145 191 286

AIKO 117 AIWA 034 161 AKAI 016 146 043 046 124 125 AMERICA ACTION 117 AMERICAN HIGH 145 AMPRO 072 ANAM 145 ASHA 040 AUDIO DYNAMICS 012 023 039 043 AUDIOVOX 101 BEAUMARK 040 BROKSONIC 035 037 129 CALIX 101 CANON 028 CAPEHART 108 CCE 024 117 CITIZEN 101 117 COLT 024 CRAIG 003 022 102 CURTIS MATHES 041 145 CYBERNEX 040 DAEWOO 111 116 117 005 010 108 110 120 DAYTRON 108 DBX 012 023 039 043 DYNATECH 034 053 ELECTROHOME 059 ELECTROPHONIC 101 EMERSON 006 029 035 017 025 027 034 036 037 046 101

129 131 153 162 116 145 FISHER 003 010 008 009 FUJI 145 FUNAI 034 GARRARD 034 GE 072 147 107 109 144 145 GO VIDEO 132 136 155 115 102 GOLDSTAR 101 106 114 020 020 012 123 GRADIENTE 034 HARLEY DAVIDSON 034 HARMAN KARDON 012 045 HARWOOD 024 HITACHI 004 026 150 034 043 160 020 HQ 034 INSTANTREPLAY 145 JCL 145 JCPENNEY 012 013 015 066 101 102 JENSEN 043 JVC 048 043 130 150 060 012 152 145 KEC 101 KENWOOD 014 048 034 047 KLH 024 KODAK 101 145 LG 101 106 114 020 020 012 123 LLOYD 034 LOGIK 024 LXI 034 003 009 017 106 MAGIN 102 MAGNAVOX 067 034 041 156 164 145 MARANTZ 067 012 156 145 MARTA 101 MATSUI 027 030 MATSUSHITA 145 MEI 145 MEMOREX 101 003 010 014 034 053 072 102 139 145 MGA 045 046 059 MGN TECHNOLOGY 040 MINOLTA 020 MITSUBISHI 059 061 151 020 020 045 046 051 049 MOTOROLA 053 145 MTC 034 102 MULTITECH 024 034 NEC 012 023 039 043 048 NIKKO 101 NOBLEX 040 NORDMENDE 043 OLYMPUS 145 OPTIMUS 101 OPTONICA 053 054 ORION 025 PANASONIC 066 070 145 163 167

ABEX 025 ADMIRAL 072 251 333 160 ADVENT 247 ADVENTURA 002 AIKO 103 ALERON 028 AKAI 116 146 248 404 405 A MARK 112 143 AMERICA ACTION 043 AMPRO 073 AMSTRAD 052 ANAM 043 054 056 080 112 AOC 116 363 112 058 APEX DIGITAL 006 AUDIOVOX 076 454 388 AVION 441 BARCO 233 BELCOR 116 BELL&HOWELL 333 072 BLAUPUNKT 088 BRADFORD 043 BROKSONIC 238 BROCKWOOD 116 CANDLE 116 002 003 363 CAPEHART 058 CELEBRITY 001 CENTURION 116 CETRONIC 043 CITIZEN 116 002 003 363 043 101 103 143 CLARION 043 CLASSIC 043 CLP CLASSIC 333 COLORTYME 116 CONCIERGE 073 CONCERTO 363 CONTEC 043 050 051 CORNEA 116 CORONADO 143 CRAIG 043 054 CROSLEY 164 CROWN 043 143 CURTIS MATHES 116 101 363 143 CXC 043 DAEWOO 363 016 043 044 076 103 114 125 127 143 DAYTRON 363 143 DELL 320 164 363 DIMENSIA 333 DUKANE 011 025 DUMONT 116 073 DURABRAND 096 DWIN 257 DYNASTY 043 EIKI 187 ELECTROBAND 001 ELECTROHOME 143 024 076 196 ELEKTRA 072 EMERSON 028 048 043 155 005 116 363 047 050 051 076

096 143 153 154 ENVISION 116 ESA 323 FISHER 007 057 FUJITSU 246 198 FUNAI 028 043 052 FUTURETECH 043 GATEWAY 242 268 GE 160 073 116 008 009 034 056 074 155 333 363 GEM 391

SYLVANIA 143 SYMPHONIC 143 TATUNG 102 TEAC 023 270 TECHNICS 138 TECHWOOD 088 THETA DIGITAL 023 THOMPSON 027 TOSHIBA 034 130 141 164 188 URBAN CONCEPTS 035 VENTURER 149 X-BOX 027 206 YAMAHA 089 066 197 138 ZENITH 057 074 091

GO VIDEO 220 221 222 CYBERHOME 271 ILO 268 KISS 279 LITEON 265 PANASONIC 138 SENSORY SCIENCE 222 SONY 191 TOSHIBA 188 273

AKAI 281 AIWA 146 AUDIOVOX 284 FUNAI 143 INSIGNIA 292 MINTEK 282 SAMSUNG 165 SYLVANIA 143 SYMPHONIC 143 TOSHIBA 130

MAGNAVOX 143 PANASONIC 144 SYLVANIA 143 TOSHIBA 164

GO VIDEO 137 PANASONIC 150 PHILIPS 105 (VCR Functions for VCR 067) SAMSUNG 137 159 SANSUI 154 SONY 145 TOSHIBA 141 ZENITH 091 (VCR Functions for VCR101)

ADCOM 082 092 225 161 269 356 AIWA 170 018 104 202 203 213 211 188 AKAI 189 ANTHEM 335 337 ARCAM 141 077 ATLANTIC TECHNOLOGY

342 AUDIO FILE 071 B & K 096 097 BOSE 070 170 224 347 409 460 BOSTON ACOUSTICS 447

Manufacturer/Brand

Set-Up Code Number

VCR

Manufacturer/Brand

Set-Up Code Number

DVD

Manufacturer/Brand

Set-Up Code Number

DVD-DVD Recorders

Manufacturer/Brand

Set-Up Code Number

DVD-TV/DVD Combos

Manufacturer/Brand

Set-Up Code Number

DVD-TV/DVD/VCR Combos

Manufacturer/Brand

Set-Up Code Number

DVD-DVD/VCR Combos

Manufacturer/Brand

Set-Up Code Number

AUX-AUDIO

Remote

Converter

Code No

CABLE Converter

Scientific-Atlanta Explorer 8000,

UR5L-8500L

Pioneer Voyager DVR, Pace Micro 001 DVR Series.