Universal Remote Control UR3-SR User Manual

AAAA.... TTTThhhhrrrreeeeeeee DDDDiiiiggggiiiitttt CCCCooooddddeeee MMMMeeeetttthhhhoooodddd..

The remote control can be programmed by pressing in a three digit code number that corresponds to particular manufacturers and brands of Audio/Video equipment. The three digit code numbers are listed in the code table of the instruction manual.

STEP1 Turn on the equipment you wish to program. (CBL, TV, VCR or DVD) STEP2 Press the [DEVICE] button (CBL, TV or VCR) to be programmed and the [SELECT] button

simultaneously for 3 second. The device LED will turn on indicating that it is ready to be

programmed. *Tip : The LED will light on for 20 seconds. The next step must be entered while LED is on. STEP3 Point the remote control toward the equipment and enter the three digit code number

assigned to your brand from the code tables.

Universal Remote Control, Inc.

www.universalremote.com

OCE-0009A Rev 01(11/21/02)

UR3-SR

Operating Instructions

For 3 Function

Cable Remote Control

The remote control is designed to operate three devices, CBL(S/A Explorer and other Cable boxes), TV, and VCR/DVD equipments.

Introduction

Default State:

Device Default: Cable mode with S/A Explorer. Volume Default: Vol +/- & Mute from TV mode.

VOD button:

This button sends out CH 999 with default and a customer can program any commands, up to 10 commands. Please refer to section E for details.

Operations

Replacing Batteries

Before you program or operate the remote control, you must install two new AAA alkaline batteries.

STEP1 Remove the battery compartment cover

on the back of your remote control.

STEP2 Check battery polarity carefully, and

install the batteries as shown in the illustration below.

STEP3 Replace the battery compartment

cover.

Install two

AAA alkaline batteries

as shown here

Button Functions

Programming the Remote Control.

TV, VCR, CBL

Allow you to turn on and off your TV, VCR and CABLE Box.

GUIDE

Displays the program guide.

Displays cable settings or Menu.

EXIT

Exits settings, menus, and guides.

CURSOR KEYS

Moves through menus or guides.

HELP

Displays HELP screen.

SELECT

Selects and deselects screen item.

A, B, C

Selects options in menus and IPG.

VOL+/-

Adjusts the volume up and down.

NUMBER KEYS

Allow direct access to specific channels and menu options.

VOD

Access Video On Demand.

VCR/VOD

Switches the VCR controls into Video On Demand controls.

MUTE

Turns volume off.

LAST

Returns to last channel viewed.

CH+/-

Selects channels up or down.

VCR/DVD KEYS

Perform standard VCR and DVD functions when in VCR mode, and Video On Demand functions when in VOD mode.

INFO

Displays channel and program information.

*Tip : The equipment will turn off when the

correct three digit code number has been entered. You can verify that you have selected the correct code by pressing the [MUTE] button, the equipment should turn On and Off.

*Note : If there is more than one three digit

number listed for your brand, try one code number at a time until your equipment turns off.

STEP4 Store the three digit code number by

pressing the same [DEVICE] button once again. The device LED will blink twice to confirm that the code has been stored.

*Note : Try all the functions on the remote

control. If any of the functions do not work as they should, repeat from Step 2 using the next three digit code number from the same brand list.

BBBB.... AAAAuuuuttttoooo SSSSeeeeaaaarrrrcccchhhh MMMMeeeetttthhhhoooodddd..

If none of the three digit code numbers assigned to your brand turns off your equipment or the code table does not list your brand, you can use the Auto Search Method to find the correct three digit code number for your equipment by the following steps:

STEP1 Turn on the equipment you wish to

program. (CBL, TV, VCR or DVD)

STEP2 Press the [DEVICE] button (CBL, TV or

VCR) to be programmed and the [SELECT] button simultaneously for 3 second. The device LED will turn on indicating that it is ready to be programmed.

*Tip : The LED will light on for 20 seconds. The

next step must be entered while LED is on.

STEP3 Press the [CH+] or [CH-] button one

step at a time. The remote will emit a series of Power ON/OFF code signals. Release the [CH+] or [CH-] button as soon as the equipment turns off.

*Tip : You can verify that you selected the

correct code by pressing the [MUTE] button. The equipment should turn On and Off.

STEP4 Press the same [DEVICE] button to

store the code. The Device LED will blink twice to confirm that the code has been stored.

CCCC.... TTTToooo FFFFiiiinnnndddd tttthhhheeee TTTThhhhrrrreeeeeeee DDDDiiiiggggiiiitttt CCCCooooddddee

NNNNuuuummmmbbbbeeeerrrr TTTThhhhaaaatttt wwwwaaaassss SSSSttttoooorrrreeeedddd iiiinn

tttthhhheeee DDDDeeeevvvviiiicccceeee..

STEP1

Press the [DEVICE] button (CBL, TV or VCR) you wish to verify and the [SELECT] button simultaneously for 3 second.

*Tip : The LED will light on for 20 seconds.

The next step must be entered while LED is on.

STEP2 Press the [INFO] button.

The device LED will blink a number of times indicating the number of each digit for the code. Each digit is separated by a 1 second interval of the LED being off.

Example : One blink, three blinks and eight

blinks with an interval of 1 second LED being off, indicates the code number 138.

Note : Ten blinks is equal to the number 0.

DDDD.... PPPPrrrrooooggggrrrraaaammmmmmmmiiiinnnngggg aaaa sssseeeeccccoooonnnndddd TTTTVV

ttttoooo VVVVCCCCRRRR MMMMooooddddee

ee.

STEP1 Press the [DEVICE] button [VCR] to

be programmed and the [SELECT] button simultaneously for 3 seconds.

*Tip : The LED will light on for 20 seconds.

The next step must be entered while LED is on.

STEP2 Press the [TV] button to pick up the

TV code table.

STEP3 Point the remote control toward the

equipment and enter the three digit code number assigned to your TV brand from the code tables.

STEP4

Store the three digit code number by pressing the [DEVICE] button (VCR) once again. The device LED will blink twice to confirm that the code has been stored.

EEEE.... PPPPrrrrooooggggrrrraaaammmmmmmmiiiinnnngggg FFFFoooorrrr AAAAddddvvvvaaaannnncccceeeedddd FFFFuuuunnnnccccttttiiiioooonnnn..

In the CABLE device mode, the A,B,C and VOD buttons can be programmed to act as a macro button to send out up to 10 commands with one button press.

STEP1 Press the [CBL] button to select the

CABLE mode.

STEP2 Press the [VOD] button and the

[SELECT] button simultaneously for 3 second. The CBL device LED will turn on for 20 seconds.

STEP3 Press up to 10 buttons you wish to

store. The CBL device LED will blink once for each command entered.

STEP4 Press the [CH+] button to store the

functions that are selected. The CBL device LED will blink twice to confirm the storage of functions.

To erase the Macro programming and return to the original function:

STEP1 Press the [CBL] button to select the

CABLE mode.

STEP2 Press [VOD] button and the

[SELECT] button simultaneously for 3 second. The CBL device LED will turn on for 20 seconds.

STEP3 Press the [CH+] button to erase the

functions stored in the button. The CBL device LED will blink twice to confirm that the memory button has been erased.

FFFF.... VVVVoooolllluuuummmmeeee PPPPuuuunnnncccchhhh TTTThhhhrrrroooouuuugggghhhh..

The user can program the volume controls (Volume UP, Down and MUTE) to operate from one mode to any other modes. The default volume control settings on the remote control is TV volume control.

STEP1 Press the [CBL] button you wish

to punch through to and the [SELECT] button simultaneously for 3 second.

*Tip : The LED will light on for 20 seconds.

The next step must be entered while LED is on.

STEP2 Press the [VOL +] button. The

device LED will blink.

STEP3 Press the [DEVICE] button (CBL, TV

or VCR) you wish to punch through from. The CBL device LED will blink twice to confirm the programming.

Example : If you wish to have the CABLE

volume operate, select the [CBL] button in Step 3.

GGGG.... CCCChhhhaaaannnnnnnneeeellll PPPPuuuunnnncccchhhh TTTThhhhrrrroooouuuugggghhhh::

The user can program the Channels (CH UP, Down, Numeric buttons and LAST) to operate from one mode to any other modes. The default channel control settings on the remote control is CABLE channel control.

STEP1 Press the [CBL] button you wish

to punch through to and the [SELECT] button simultaneously for 3 second.

*Tip : The LED will light on for 20 seconds.

The next step must be entered while LED is on.

Set-up Code Tables

STEP2 Press the [VOL -] button. The device

LED will blink.

STEP3 Press the [DEVICE] button (CBL, TV

or VCR) you wish to punch through from.The CBL device LED will blink twice to confirm the programming.

Example : If you wish to have the TV channel,

select the [TV ] button in Step 3.

HHHH.... LLLLOOOOWWWW BBBBAAAATTTTTTTTEEEERRRRYYYY WWWWAAAARRRRNNNNIIIINNNNGGGG..

When the battery is low (2.3V-2.0V) and needs to be replaced with fresh batteries, device LED will blink 2 times in sequence whenever a [DEVICE] button is pressed to turn on equipment.

IIII.... FFFFAAAACCCCTTTTOOOORRRRYYYY RRRREEEESSSSEEEETTTT FFFFUUUUNNNNCCCCTTTTIIIIOOOONNNN..

Press [CBL] device button and the [REC] button simultaneously for 5 seconds. The three devices LED will blink 3 times sequentially.

JJJJ.... MMMMeeeemmmmoooorrrryyyy LLLLoooocccckkkk SSSSyyyysssstttteeeemmmm..

This remote control is designed to retain programmed memory for 10 years even after batteries are removed from the remote control.

MAKER(BRAND) NAME

CODE NUMBER (3 DIGIT) LIST

AMPRO 073 167 ANAM 043 054 055 056 080 112 131 AOC 004 058 070 112 AUDIOVOX 043 076 103 BAYSONIC 043 BELL&HOWELL 072 BRADFORD 043 BROKSONIC 096 CAIRN 206 CANDLE 002 003 004 070 CAPEHART 058 CARVER 164 CELEBRITY 001 CETRONIC 043 CINERAL 103 120 CITIZEN 002 003 004 070 101 103 143 CLASSIC 043 CONCERTO 004 CONTEC 043 051 227 250 CORONADO 143 CRAIG 028 043 054 CROSLEY 164 CROWN 043 143 CURTIS MATHES 004 011 070 072 081 101 120 143 164 CXC 043 DAEWOO 004 016 043 044 055 076 103 120 125 127 143 234 235 249 DAYTRON 004 143 DENON 011 DUMONT 004 073 DWIN 161 DYNASTY 043 DYNATECH 062 229 ELECTROBAND 001 ELECTROHOME 024 076 143 EMERSON 004 005 028 043 048 051 076 096 143 151 153 154 155 236 237

250 ENVISION 070 FISHER 007 057 FUJITSU 028 198 210 211 FUNAI 028 043 052 FUTURETECH 043 GE 004 008 009 034 056 070 073 074 081 091 120 130 144 155 160

161 GIBRALTER 004 073 GOLDSTAR / LG 004 106 110 112 113 119 127 143 GRUNPY 028 043 HALL MARK 004 HARLEY DAVIDSON 028 HARMAN KARDON 164 231 HARVARD 043 HITACHI 004 007 009 010 011 012 023 072 075 143 158 163 228 INFINITY 164 INKEL 129 INTEQ 073 JBL 164 229 JCB 001 JCPENNEY 004 008 024 030 065 070 101 143 156 160 JENSEN 013 JVC 001 034 038 083 199 208 KENWOOD 001 070 KLOSS 002 059 KTV 070 043 143 154 LODGENET 072 LOEWE 209 211 LOGIK 072 LUXMAN 004 LXI 007 015 052 081 160 164 MAGNAVOX 003 004 022 028 056 059 060 061 063 064 070 094 127 160 164 MAJESTIC 072 MARANTZ 070 164 MATSUI 164 MATSUSHITA 080 MEGATRON 004 MEMOREX 004 007 028 072 096 METZ 088 MGA 004 024 042 070 MIDLAND 073 MINERVA 088 MINUTZ 008 MITSUBISHI 109 024 042 004 040 146 028 124 214 246 081 MOTOROLA 081 MTC 070 004 062 101 229 249 MULTITECH 043 NAD 015 025 NEC 070 130 134 040 056 007 019 024 004 233 NIKEI 043 NIKKO 103 NTC 103 ONKING 043 ONWA 043 OPTIMUS 080 OPTONICA 019 081 ORION 096 201 202 203 204 205 028 096

MAKER(BRAND) NAME

CODE NUMBER (3 DIGIT) LIST

ADMIRAL 072 081 096 160 161 AIKO 103 AKAI 004 070 146 ALARON 028 AMARK 112 143 AMERICA ACTION 043

MAKER(BRAND) NAME

CODE NUMBER (3 DIGIT) LIST

ELECTROPHONIC 101 EMERSON 006 029 035 025 027 034 036 037 046 101 129 131 138 017 031

044 152 153 157 231 117 FISHER 003 008 009 010 FUJI 031 FUNAI 034 GARRARD 034 GE 031 072 144 147 063 151 107 109 156 126 232 233 040 053 GO VIDEO 040 132 136 GOLDSTAR / LG 101 123 012 013 114 HARLEY DIVIDSON 034 HARMAN KARDON 012 045 HARWOOD 024 HITACHI 013 026 034 063 137 150 156 HQ 034 HUGHES 013 INSTANTREPLAY 031 JCL 031 JCPENNEY 012 013 040 101 156 066 234 031 JENSEN 043 JVC 048 050 043 130 060 012 031 150 055 158 KEC 101 117 KENWOOD 014 034 047 048 023 KLH 024 KODAK 031 101 LLOYD 034 LOGIK 024 LXI 034 003 009 017 101 MAGIN 040 MAGNASONIC 117 MAGNAVOX 067 031 034 041 068 154 160 064 MARANTZ 067 069 031 067 012 023 MARTA 101 MATSUI 027 030 MATSUSHITA 031 MEI 031 MEMOREX 102 101 003 010 014 031 034 053 072 139 134 234 025 040 MGA 045 046 059 MGN TECHNOLOGY 040 MINOLTA 013 156 MITSUBISHI 059 061 046 051 142 013 045 162 232 053 MOTOROLA 031 053 MTC 034 040 MULTITECH 024 034 NEC 012 023 043 048 039 NIKKO 101 NOBLEX 040 NORDMENDE 043 OLYMPUS 031 OPTIMUS 053 101 OPTONICA 053 054 ORION 231 025 PANASONIC 070 133 031 066 160 161 234 PENTAX 013 031 063 156Ä PHILCO 031 034 067 025 PHILIPS 031 067 034 101 054 071 PILOT 101 PIONEER 021 013 048 PORTLAND 108 PROFITRONIC 040 PROTEC 024 QUARTZ 002 014 QUASAR 070 133 161 031 066 160 234 RADIO SHACK 123 034 RADIX 101 RANDEX 101 RCA 107 109 144 147 151 013 041 034 040 156 031 140 232 233 053 REALISTIC 003 008 010 014 031 034 040 053 054 101 RICO 058 078 SALORA 014 SAMSUNG 102 040 032 104 107 109 112 113 115 120 122 125 159 SANKY 053 SANSUI 043 048 135 022 025 034 SANYO 003 010 102 007 014 134 040 SCOTT 017 037 044 129 131 112 159 SEARS 003 008 009 010 013 014 017 081 101 031 034 SHARP 031 054 053 143 SHINTOM 024 SHOGUN 040 SIGNATURE 034 SINGER 024 SONY 001 057 058 003 052 149 031 155 034 SOUNDESIGN 034 STS 013 SYLVANIA 031 059 034 067 SYMPHONIC 034 TANDY 010 034 TATUNG 039 043 023 TEAC 034 039 043 023 TECHNICS 031 070 TEKNIKA 031 019 034 101 THOMAS 034 TMK 006 040

VCR & TV/VCR

MAKER(BRAND) NAME

CODE NUMBER (3 DIGIT) LIST

TOSHIBA 112 008 131 047 059 082 013 042Ä TOTEVISION 040 101 UNITECH 040 VECTOR RESEARCH 012 VIDEO CONCEPTS 012 046 034 141 VIDEOSONIC 040 WARDS 003 013 024 031 034 040 053 054 017 131Ä WESTINGHOUSE 024 025 XR-1000 024 031 034 YAMAHA 012 043 034 039 ZENITH 072 080 001 048 034 101 058 025

VCR & TV/VCR

MAKER(BRAND) NAME

CODE NUMBER (3 DIGIT) LIST

ALPINE 179 APEX DIGITAL 196 197 ARCAM 165 CYBERHOME 170 DAEWOO 170 DENON 184 226 GE 188 189 GOLDSTAR / LG 182 194 HARMAN KARDON 217 HITACHI 181 HITEKER 197 INTEGRA 208 JVC 185 KENWOOD 166 KLH 230 MAGNAVOX 178 191 195 MARANTZ 176 177 MCINTOSH 167 MITSUBISHI 186 NAD 198 ONKYO 207 OPTIMUS 187 PANASONIC 173 192 PHILIPS 164 176 177 191 195 PIONEER 175 180 187 PROCEED 172 PROSCAN 188 189 RCA 188 189 SAMSUNG 183 193 228 SHARP 174 SONY 168 190 TECHNICS 193 THETA DIGITAL 187 TOSHIBA 169 171 191 206 227 VENTURER 229 YAMAHA 192 199 ZENITH 182 194

DVD(VCR)

MAKER(BRAND) NAME

CODE NUMBER (3 DIGIT) LIST

PANASONIC 034 056 080 164 212 216 226 PHILCO 070 003 004 024 056 059 060 063 064 127 143 164 PHILIPS 164 005 038 093 127 070 003 004 059 213 PIONEER 023 025 135 176 004 018 070 PORTLAND 004 143 103 PRISM 034 PROSCAN 144 160 161 167 PROTON 004 058 143 171 173 193 131 QUASAR 034 056 RADIO SHACK 004 019 127 143 043 RCA 160 161 144 156 065 070 004 023 024 056 074 152 081 REALISTIC 007 019 RUNCO 072 169 073 130 179 180 181 073 SAMPO 070 004 058 207 SAMSUNG 004 101 127 133 143 160 089 105 070 215 SANSEI 120 SANSUI 096 SANYO 007 053 057 082 020 232 SCOTCH 004 SCOTT 004 005 028 043 048 143 SEARS 004 007 015 028 030 057 082 094 143 160 052 164 SELECO 189 200 SEMIVOX 043 SEMP 015 SHARP 081 014 019 028 004 022 081 143 175 029 SIGNATURE 072 SONY 001 085 126 139 SOUNDESIGN 003 004 028 043 SPECTRICON 112 SQUAREVIEW 052 SSS 004 043 STARLITE 043 SUPRE MACY 002 SUPREME 001 SYLVANIA 070 003 059 060 063 064 127 160 164 044 056 230 SYMPHONICS 052 TANDY 081 TATUNG 056 062 229 TECHNICS 034 080 TECHNOL ACE 028 TECHWOOD 004 TEKNIKA 002 003 004 024 028 043 072 101 143 103 247 103 164 TELERENT 072 TERA 172 TMK 004 TNCI 073 TOSHIBA 015 030 007 040 062 101 TOTEVISION 143 UNIVERSAL 008 009 VIDEO CONCEPTS 146 VIDIKRON 174 188 164 VIDTECH 004 WARDS 004 064 164 008 009 019 028 060 061 063 072 074 143 070 WESTING HOUSE 076 YAMAHA 004 070 YORK 004 YUPITERU 043 ZENITH 072 073 095 103 011 096 ZONDA 112

MAKER(BRAND) NAME

CODE NUMBER (3 DIGIT) LIST

ADMIRAL 025 053 AIKO 117 AIWA 034 101 AKAI 016 043 046 124 125 142 146 AMERICA ACTION 117 AMERICAN HIGH 031 AMPRO 072 ANAM 031 ASHA 040 AUDIO DYNAMICS 012 023 039 043 AUDIOVOX 101 BEAUMARK 040 BROKSONIC 035 037 044 129 152 231 025 CALIX 101 CANON 028 031 CAPEHART 108 CCE 024 117 CINERAL 117 CITIZEN 101 117 COLT 024 CRAIG 003 040 135 024 101 CURTIS MATHES 031 041 156 CYBERNEX 040 DAEWOO 117 119 005 116 007 010 065 108 110 112 DAYTRON 108 DBX 012 023 039 043 DIMENSIA 156 DYNATECH 034 053 ELECTROHOME 059 101

VCR & TV/VCR

*Note : For TV/VCR combination unit, Please

use following steps to operate the volume control.

STEP1 Press the [CBL] button and the

[SELECT] button simultaneously for 3 seconds. The CBL device LED will light on for 20 seconds.

STEP2 Press the [VOL+] button. STEP3 Press the [VCR] button. The CBL

device LED will blink twice to confirm the programming.

MAKER(BRAND) NAME

CODE No

CONVERTER

CABLE TV

MOTOROLA DCT Series 002 GENERAL INSTRUMENT CFT2200 002 JERROLD CFT2000 012

DRZ 024 DL4,DP(V),DQN(V),DPBB 025 DRX 027 Some Model 048

HAMLIN CR6000 042

CR6600,6800,CR83 043 CRX5000 044

NSC IM781R 046

IM781 047

OAK SIGMAONE, P1,P2,P3, SIGMA 2000 037

RTC56,RKDM 038 SIGMA 2001,2002 039

SIGMA 450,500,550 040 PACE DI4000 Series 004 PANASONIC 140,145,170,175 030

110,120,130,150,160 031 PIONEER VOYAGER Series 001

BA9000 01

BA4100,4200,4500 028

BA-V1000 029 REGENCY ALL MODELS 045 SCIENTIFIC ATLANTA EXPLORER Series 001

8600X 011

8600 021

8540,8570,8590 022

8500 023 SONY DHG-M55CV 003 TOCOM 5507 035

5503A 036 ZENITH MN2500 032

PM 033 Z-TAC 034

Universal Remote Control UR3-SR User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual