Universal Remote Control Easy Clicker UR3-SR3-DTA Operating Manual
A. Quick Set-Up Method
STEP1
Turn on the component you
want to program. To program
your TV, turn on the TV.
STEP2
Press and hold the [DEVICE] key
for 5 seconds until the Device
LED will blink once and stays on.
Continue to hold the [DEVICE]
key and press the number key
assigned to your brand in the
Quick Set-up Code Table and
release both [DEVICE] key and
the number key to save the
code. The Device LED will blink
twice to confirm that the code is
stored.
STEP3
Point the remote control at the
component.
STEP4
P
ress the [DEVICE] button. If it
turns off, it is programmed for your
component. If it does not turn off,
use the Pre-Programmed 3-Digit
code Method or Scanning Method.
Repeat the steps above for all components (CBL, TV, DVD).
B. Quick Set-up Code Tables
C. Manual Programming
The remote control can be programmed by entering a three-digit
code number that corresponds to particular brands and models of equipment. The three-digit code numbers
are listed in the code tables sections
of this instruction manual.
STEP1
Turn on the equipment that
you want the remote control to
operate Cable Box, TV and
DVD.
STEP2
Press the [DEVICE] button and
the [OK/SEL] button simultaneously for three seconds. The
corresponding device LED will
turn on indicating that it is
ready to be programmed. The
LED will remain on for 20 seconds. The next step must be
entered while the LED is on.
STEP3
Point the remote control
toward the equipment and
enter the three-digit code
number assigned to your
brand from the code tables. If
there are more than one
three-digit number listed for
your brand, try one code number at a time until your equipment turns off.
*Note : You can verify that you have
selected the correct code by
pressing the [MUTE] button.
The equipment should turn on
or off.
STEP4
Store the three-digit code by
pressing the same [DEVICE]
button once again. The device
LED will blink twice to confirm
that the code has been stored.
*Note : Try all the functions on the
remote control. If any of the
Universal Remote Control, Inc.
www.universalremote.com
OCE-0009F REV 09 (03/09/17)
1
Introduction
3
Button Functions
2
Replacing Batteries
This remote control is designed to operate most Digital and Analog Cable Boxes, as
well as TVs, and a DVD player.
D. Auto Search Method
If none of the three digit code numbers
assigned to your brand of equipment
works, or the code table does not list
your brand, you can use the Auto
Search Method to find the correct
three-digit code number for your
equipment by following steps:
STEP1
Turn on the equipment that
you want the remote control to
operate(Cable Box, TV, or DVD).
STEP2
Press the [DEVICE] button and
the [OK/SEL] button simultaneously for three seconds. The
device LED will turn on indicating that it is ready to be
programmed. The LED will
remain on for 20 seconds. The
next step must be entered
while the LED is on.
STEP3
Press the [CH5] or [CH6]
button one at a time or keep it
pressed. The remote will emit
a series of Power ON/OFF
code signals. Release the
[CH5] or [CH6] button as soon
as the equipment turns off.
*Note : You can verify that you select-
ed the correct code by pressing the [MUTE] button. The
equipment should turn On or
Off.
STEP4
Press the same [DEVICE] button to store the code. The
Device LED will blink twice to
confirm that the code has
been stored.
E. To find the Three-Digit Code that
Was Programmed using the
Auto Search Method
STEP1
Press the appropriate
[DEVICE]
button and the [OK/SEL] button
simultaneously for three seconds. The device LED will turn
on for 20 seconds. The next
step must be performed while
the LED is on.
STEP2
Press the [INFO] button. The
device LED will blink a number
of times indicating the number
of each digit for the code.
Each digit is separated by a
one second interval of the LED
being off.
Example : One blink, then three
blinks, then eight blinks
indicates the code number 138.
*Note : Ten blinks indicates the
number 0.
F. Programming a Second TV
to the DVD Button
STEP1
Press the [DVD] button and the
[OK/SEL] button simultaneously for 3 seconds. The DVD LED
will turn on for 20 seconds.
The next step must be performed while the LED is on.
STEP2
Press the [TV] button.
STEP3
Point the remote control
toward the TV and enter the
three-digit code for your TV
from the TV codes table.
STEP4
Store the three-digit code by
pressing the [DVD] button. The
device LED will blink twice to
confirm that the code has
been stored.
G. Programming for Advanced
Functions.
In the CABLE device mode, the A,B,C,D
and blank macro buttons can be programmed to act as a 'Macro' or
Favorite Channel button. This allows
you to program up to five 2-digit channels, four 3-digit channels or three 4digit channels that can be accessed
with ONE button press.
STEP1
Press the [CBL] button to
select the CBL mode.
STEP2
Press the [MACRO] button and
[OK/SEL] button simultaneously for 3 seconds. The [CBL]
button will turn on for 20 seconds.
STEP3
Enter the 2, 3 or 4-digit code for
the channel you want pro-
grammed first (for example,
007) using the Number Pad,
then press the [STOP] button.
Then enter the code for the
next channel (for example,
050), then press the [STOP]
button. Repeat this process for
the third channel. The [CBL]
button will blink once for each
channel entered.
STEP4
Press the [CH5] button to
store the channels that were
selected. The [CBL] button will
blink twice to confirm the storage of commands.
To access the programmed channels,
press the [MACRO] button once. This
will bring up the first channel. Press
once again and it will bring up the
second channel. Press again and it
will bring up the third channel.
To erase the Macro programming and
return to the original function:
STEP1
Press the [CBL] button to
select the CABLE mode.
STEP2
Press a [MACRO] button and
the [OK/SEL] button simultaneously for 3 seconds. The CBL
device LED will turn on for 20
seconds. The next step must
be performed while the LED is
on.
STEP3
Press the [CH5] button to
erase the functions stored in
the button. The CBL device
LED will blink twice to confirm
that the memory button has
been erased.
H. Assigning the Volume and
Mute keys to a Different
Device
By default, the VOL5, VOL6 and
MUTE keys operate through your Cable
Box. If you would like those keys to
operate those functions on a different
device, follow these steps.
STEP1
Press the [OK/SEL] button and
[CBL] button simultaneously
for three seconds. The device
LED will turn on for 20 seconds. The next step must be
Before you program or operate the
remote control, you must install two
new AAA alkaline batteries.
STEP1
Remove the battery compartment cover from the back of
your remote control.
STEP2
Check battery polarity carefully, and install the batteries
as shown in the illustration
below.
STEP3
Replace the battery compartment cover.
CBL
Quick Number
Manufacturer/Brand
UR3-SR3-DTA
Operating Manual
For Easy Clicker
Install two
AAA alkaline batteries
as shown here
4
Programming the
Remote Control
*Note : In this section, when you
are instructed to press a
[DEVICE] button, that
means you should press
either the CBL, TV, or DVD
button, depending on which
device you are programming the remote to operate.
1 CISCO
2 MOTOROLA, ARRIS
3 TECHNICOLOR, PACE
TV
Quick Number
Manufacturer/Brand
0 SANYO
1 SONY
2 SAMSUNG
3LG
4 TOSHIBA
5 PANASONIC
6 PHILIPS
7 HITACHI
8 SHARP
9 VIZIO
DVD
Quick Number
Manufacturer/Brand
0 HITACHI
1 SONY
2 PHILIPS
3 SAMSUNG
4 PHILIPS MAGNAVOX
5 PANASONIC
6LG
7 JVC
8 DENON
9 PIONEER
functions do not operate as
they should, repeat the
instructions from Step 2 using
the next three-digit code number from the same brand list.
*Note : For TV/DVD combination
units, Please use following
steps to operate the volume
control.
STEP1
Press the [CBL] button and the
[OK/SEL] button simultaneously for 3 seconds. The device
LED will turn on for 20 seconds. The next step must be
performed while the LED is on.
STEP2
Press the [VOL5] button.
STEP3
Press the [DVD] button. The
CBL device LED will blink
twice to confirm the programming.
TV
MAKER(BRAND) NAME
CODE NUMBER (3 DIGIT) LISTTVMAKER(BRAND) NAME
CODE NUMBER (3 DIGIT) LIST
DVD
MAKER(BRAND) NAME
CODE NUMBER (3 DIGIT) LIST
DVD
MAKER(BRAND) NAME
CODE NUMBER (3 DIGIT) LIST
performed while the LED is on.
STEP2
Press the [VOL 5] button. The
device LED will blink.
STEP3
Press the [DEVICE] button corresponding to the device that
you would like the volume and
mute buttons to control. The
device LED will blink twice to
confirm the programming.
Example : If you wish to have the vol-
ume and mute keys operate
your TV, press the [TV]
button in Step3.
I. Assigning the Channel keys to a
Different Device
By default, the CH5, CH6, NUMERIC
and LAST keys operate through your
Cable Box. If you would like those keys
to operate those functions on a different device, follow these steps.
STEP1
Press the [OK/SEL] button and
[CBL] button simultaneously
for three seconds. The device
LED will turn on for 20 seconds. The next step must be
performed while the LED is on.
STEP2
Press the [VOL6] button. The
device LED will blink.
STEP3
Press the [TV] button. The
device LED will blink twice to
confirm the programming.
*Note : If you wish to have the chan-
nel keys operate your Cable
Box, press the [CBL] button
instead of the [TV] button in
Step 3.
J. Assigning the DVD – VOD keys
to control your DVD
By default, the REW, Play, FF, Record,
Stop and Pause keys operate VOD
(Video On Demand) through your Cable
Box. If you would like those keys to
operate those functions on your DVD,
press the PLAY button for 3 seconds
until the DVD button lights. To return to
5
Set-up Code Tables
CISCO 001
MOTOROLA / ARRIS
002
TECHNICOLOR / PACE
113
TV
MAKER(BRAND) NAME
CODE NUMBER (3 DIGIT) LIST
CABLE BOX
MAKER(BRAND) NAME
CODE NUMBER (3 DIGIT) LIST
your Cable Box control, press the PLAY
key again for 3 seconds until the CBL
button lights.
K. Low Battery Warning
When the battery is low (2.3V-2.0V) and
needs to be replaced with fresh batteries, device LED will blink 2 times in
sequence whenever a [DEVICE] button
is pressed to turn on equipment.
L. Memory Lock System.
This remote control is designed to retain
programmed memory for 10 years — even
after batteries are removed from the
remote control.
For additional information about your
remote control, go to www.universalre
-
mote.com
TV
MAKER(BRAND) NAME
CODE NUMBER (3 DIGIT) LIST
PARASOUND 083
PHILIPS 164 074 209 176 177 191 195 127
PIONEER 187 180 175 221 223 093 364 156 377
POLAROID 075 084 085
PRIMARE 250 251
PROCEED 172
PROSCAN 188 189
RCA 188 189 086
SANSUI 201
SANYO 215
SAMSUNG 183 228 193 205 073 152 241 380
SENSORY SCIENCE 254 255
SHARP 174
SHERWOOD 083 129 361
SONY 077 190 213 168 118 119 120 121 126 091
363 368 378
SPECTRONIQ 088
SUPERSCAN 235
SV2000 235
SYLVANIA 235
SYMPHONIC 235
TAG McLaren 202
TASCAM 185
TECHNICS 173
THETA DIGITAL 187
TOSHIBA 169 171 191 206 227 201 236 356
TRUTECH 151
VENTURER 229
VINC 220 087
VIZIO 375
YAMAHA 199 204 246 184 192 334
ZENITH 182 194
BAYSONIC 043
BELL&HOWELL 072
BENQ 234
BRADFORD 043
BROKSONIC 096 170
CAIRN 162
CANDLE 070 002 003 004
CAPEHART 058
CARVER 164
CELEBRITY 001
CETRONIC 043
CIELO 714
Ciil 732
CINERAL 103 120
CITIZEN 070 002 003 004 101 103 127
CLASSIC 043
COBY 640 641 671 236
CONCERTO 004
CONTEC 043 051
Continu-us 161 746 747
CORONADO 127
CRAIG 043 054 028
CROSLEY 164
CROWN 043 127
CURTIS MATHES 070 004 101 011 072 081 120 164 127
CXC 043
DAEWOO 076 103 112 004 127 016 043 044 125 120
DAYTRON 004 127
DELL 041 249
DENON 011
DIGITAL PROJECTION
090
DUMONT 004 073
DWIN 131 132 161
DYNASTY 043
DYNATECH 062
FISHER 007 057
ELECTROBAND 001
ELECTROHOME 024 076 127
ELEMENT 004 110 622 690
EMERSON 005 028 043 048 076 096 155 004 051 151
153 154 127 121
ENVISION 070
EPSON 087 228
ESA 031
Evervue 755
FREEMOTION 688
FUJITSU 164 197 028 157 149 066 217
FUNAI 028 043 052 168
FUSION 642
FUTURETECH 043
GATEWAY 165 031
GE 070 073 130 144 160 161 004 008 009 034
056 074 091 155 081 120
GEM 031
GIBRALTER 004 073
GOLDSTAR 004 106 112 127
GPX 674
GRUNPY 028 043
HAIER 004 116 623 236 749
HALL MARK 004
HANNSPREE 099
HARLEY DAVIDSON
028
HARMAN KARDON 164
HARVARD 043
HISENSE 198 021 619 630 631 236 752
HITACHI 011 007 009 004 072 010 012 023 075 158
127 174 243 670
HP 027 039 098
HUMAX 122
HYPERION 242
HYUNDAI 049 067
ILO 055 096
INFINITY 164
INFOCUS 046 215 225 233 726 733
INKEL 129
INSIGNIA 068 069 078 096 164 168 247
INTEQ 073
JBL 164
JCB 001
JCPENNEY 004 008 024 030 065 070 101 160 156 127
JENSEN 013
JVC 038 001 034 083 195 159 227 639
KENWOOD 070 001
KLEGG 220
KLOSS 002 059
KREISEN 202
KTV 070 043 154 127
LG 004 106 112 127 086 236 648 741
LODGENET 072
LOEWE 196 164 738
LOGIK 072
LUXMAN 004
LXI 007 015 052 081 160 164
MAGNAVOX 070 003 004 022 059 060 061 063 064 127
164 094 160 056 028 035 211 205 218 050
138 232
MAJESTIC 072
MARANTZ 164 070 143 169
MATSUI 164
MATSUSHITA 080
MAXENT 165
MEGATRON 004
MEMOREX 004 007 072 028 096
METZ 088
MGA 024 070 004 042
MIDLAND 073
MINERVA 088
MINTEK 077
MINUTZ 008
MITSUBISHI 109 024 042 004 040 146 028 124 081 200
235
MOTOROLA 081
MTC 070 004 062 101
MULTITECH 043
NAD 015 025
NEC 070 130 134 040 056 007 019 024 004 182
140 717 758
NEXUS 620 078
ADCOM 203
AIWA 210 214
AKAI 239
ALPINE 179
ANTHEM 361
APEX DIGITAL 240 197 247 248 196
ARCAM 165 148 374
AUDIOVOX 075
BOSE 244 245
CAMBRIDGE AUDIO
224 145 360
CARY AUDIO DESIGN
249 149
CLASSE 242
COBY 206
CYBERHOME 170 212
DAEWOO 170
DENON 226 184 225 358
DUNE 366
DURABRAND 235
DYNEX 089
EMERSON 235
ESA 235
FUNAI 235
GE 188 189
GOLDSTAR 182 194
GO VIDEO 228 182 252 253 254
GRADIENTE 243
HARMAN KARDON 217
HITACHI 181
HITEKER 197
INSIGNIA 078 235 085 182 178 089
INTEGRA 208 236 238 128
JVC 185
KENWOOD 166
KISS 237
KLH 230
KOSS 243
KRELL 218
LEXICON 216
LG 182 194 105 090
LITEON 150
MAGNAVOX 178 191 195 235
MARANTZ 176 177 135
MCINTOSH 167
MEMOREX 222
MERIDIAN 200
MINTEK 240 196
MITO 229
MITSUBISHI 186
MOXI 112
MYRYAD 211
NAD 198 182 092
ONKYO 207 236 128
OPPO 125
OPTIMUS 187
ORITRON 243
PANASONIC 076 219 173 184 192 103 104 379
ADMIRAL 072 081 160 161 096
AD NOTAM 672
ADVENT 147
AFFINITY 680
AIWA 141 145
AKAI 070 146 004 148 124 226 104 108 244
AKIO 103
ALARON 028
AMARK 112 127
AMERICA ACTION 043
AMPRO 073 167
ANAM 043 054 056 080 112 131
AOC 058 070 004 112 245
APEX 092
APEX DIGITAL 015 150 037 724
AQUAVISION 097 100 686
AUDIOVOX 076 103 043 035 078 224
AUVIO 689
AVIELO 090 628
AVION 223
AXESS 711
NIKEI 043
NIKKO 103
NIKO 175
NORCENT 211
NTC 103
NUVISION 084
OLEVIA 219 004 161 144 160
ONKING 043
ONWA 043
OPTIMUS 080
OPTOMA 029 032
OPTONICA 019 081
ORION 096 201 203 204 205 028
PANASONIC 080 034 056 164 190 230 248 237 240 664
PEERLESS-AV 723
PHILCO 070 003 004 024 056 059 060 063 064 127
164
PHILIPS 164 005 038 093 127 070 003 004 059 199
218 161 232 629 727
PIONEER 023 025 135 176 004 018 070 183 191 208
214 182 660
PLANAR 728 742
POLAROID 026 118 119 006 110
PORTLAND 004 103 127
PRISM 034
PROSCAN 144 160 161 167 236
PROTON 004 058 171 173 193 127 163
PROTRON 102 213 004 115
PROVIEW 110
PROX 092
PYLE HOME 661 662
QUASAR 034 056 239
RADIO SHACK 004 019 127 043
RCA 160 161 144 156 065 070 004 023 024 056
074 152 081 209 713 751
REALISTIC 007 019
REVOLUTION HD 220
RUNCO 072 073 130 179 180 181 182 216 194 697
SAMPO 070 004 058 165
SAMSUNG 192 089 004 101 127 133 160 105 070 184
185 515 655
SANSEI 120
SANSUI 096 244 078
SANYO 007 053 057 082 020 750
SCEPTRE 036 699
SCOTCH 0 04
SCOTT 004 005 028 043 048 127 113
SEARS 004 007 015 028 030 057 082 094 160 052
164 127
SEIKI 690
SELECO 189
SEMIVOX 043
SEMP 015
SEURA 704
SHARP 081 019 014 028 004 022 127 684 692 735
SHERWOOD 128
SIGNATURE 072
Silo 001
Skyvue 086
TV
MAKER(BRAND) NAME
CODE NUMBER (3 DIGIT) LIST
SOLE 177 178
SONY 001 241 633 126 139
SOUNDESIGN 003 004 028 043
SOYO 163
SPECTRICON 112
SPECTRONIQ 004
SQUAREVIEW 052
SSS 004 043
STARLITE 043
SUNBRITE 633 634 635 236
SUNBRITE TV 238
SUPRE MACY 002
SUPREME 001
SVA 046
SYLVANIA 070 003 059 060 063 064 127 160 164 044
056 168 121 231
SYMPHONIC 052 168
SYNTAX OLEVIA 219 004 161 144 160
TANDY 081
TATUNG 056 062
TCL 705 749
TECHNICS 034 080
TECHNOL ACE 028
TECHVIEW 246
TECHWOOD 004
TEKNIKA 002 003 004 024 028 043 072 101 103 164
127
TELEFUNKEN 244
TELERENT 072
TERA 172
THOMPSON 166
TILEVISION 663
TMK 004
TNCI 073
TOSHIBA 015 030 007 040 062 101 142 045 137 703
TOTEVISION 127
TRUTECH 212
UNIVERSAL 008 009
UPSTAR 708
VENTURER 236
VIDEO CONCEPTS 146
VIDIKRON 188 164 182
VIDTECH 004
VIEWSONIC 210 211 720
VIORE 055 229 192
VISCO 110
VIZIO 236 031 624 004 625 675
WARDS 004 064 164 008 009 019 028 060 061 063
072 074 070 127
W Box Technologies 731
WESTINGHOUSE 076 036 221 222 001 280 690 695
WINBOOK 079
YAMAHA 004 070 206 207
YORK 004
YUPITERU 043
ZENITH 011 072 073 095 103 096
ZONDA 112
Loading...