Universal Remote Control Easy Clicker UR3-SR Operating Manual

Page 1

STEP1 Turn on the equipment that you want the remote control to operate (Cable Box, TV, VCR,

or DVD).

STEP2 Press the [DEVICE] button and the [SELECT/OK] button simultaneously for three seconds.

The corresponding device LED will turn on indicating that it is ready to be programmed. The LED will remain on for 20 seconds. The next step must be entered while the LED is on.

STEP3 Point the remote control toward the equipment and enter the three-digit code number

assigned to your brand from the code tables. If there are more than one three-digit number listed for your brand, try one code number at a time until your equipment turns off.

*Note : You can verify that you have selected the correct code by pressing the [MUTE] button. The

equipment should turn on or off.

STEP4 Store the three-digit code by pressing the same [DEVICE] button once again. The device

LED will blink twice to confirm that the code has been stored.

Universal Remote Control, Inc.

www.universalremote.com

OCE-0009A Rev 05 (08/05/04)

UR3-SR

Operating Manual

For Easy Clicker

This remote control is designed to operate most digital and analog cable boxes, as well as TVs, and a VCR or DVD player.

A. Manual Programming

The remote control can be programmed by entering a three-digit code number that corresponds to particular brands and models of equipment. The three-digit code numbers are listed in the code tables sections of this instruction manual.

Introduction

*Note : In this section, when you are

instructed to press a [DEVICE] button, that means you should press either the CBL, TV, or VCR button, depending on which device you are programming the remote to operate.

Installing Batteries

Before you program or operate the remote control, you must install two new AAA alkaline batteries.

STEP1 Remove the battery compartment cover

from the back of your remote control.

STEP2 Check battery polarity carefully, and

install the batteries as shown in the illustration below.

STEP3 Replace the battery compartment

cover.

Install two

AAA alkaline batteries

as shown here

Button Functions

Programming the Remote Control.

*Note : Try all the functions on the remote

control. If any of the functions do not operate as they should, repeat the instructions from Step 2 using the next three-digit code number from the same brand list.

B. Auto Search Method

If none of the three digit code numbers assigned to your brand of equipment works, or the code table does not list your brand, you can use the Auto Search Method to find the correct three-digit code number for your equipment by following steps:

STEP1 Turn on the equipment that you want

the remote control to operate (Cable Box, TV, VCR, or DVD).

STEP2 Press the [DEVICE] button and the

[SELECT/OK] button simultaneously for three seconds. The device LED will turn on indicating that it is ready to be programmed. The LED will remain on for 20 seconds. The next step must be entered while the LED is on.

STEP3 Point the remote control toward the

equipment and alternately press the [CH+] (or [CH-]) button and the [MUTE] button. If the right code number is sent, the equipment will turn off.

*Note : You can verify that you selected the

correct code by pressing the [MUTE] button again. The equipment should turn On or Off.

STEP4 Press the same [DEVICE] button to

store the code. The Device LED will blink twice to confirm that the code has been stored.

C. To find the Three-Digit Code that

Was Programmed using the Auto Search Method

STEP1 Press the appropriate [DEVICE]

button and the [SELECT/OK] button simultaneously for three seconds. The device LED will turn on for 20 seconds. The next step must be performed while the LED is on.

STEP2 Press the [INFO] button. The device

LED will blink a number of times indicating the number of each digit for the code. Each digit is separated by a one second interval of the LED being off.

Example : One blink, then three blinks, then

eight blinks indicates the code number 138.

*Note : Ten blinks indicates the number 0.

D. Programming a Second TV to the

VCR Button

STEP1 Press the [VCR] button and the

[SELECT/OK] button simultaneously for 3 seconds. The VCR LED will turn on for 20 seconds. The next step must be performed while the LED is on.

STEP2 Press the [TV] button.

STEP3 Point the remote control toward the

TV and enter the three-digit code for your TV from the TV codes table.

STEP4

Store the three-digit code by pressing the [VCR] button. The device LED will blink twice to confirm that the code has been stored.

E.P rogramming for Advanced

Functions.

In the CABLE device mode, the A,B,C and blank macro buttons can be programmed to act as macro buttons to send out up to 10 commands with one button press. In this section, when you’re instructed to press a [MACRO] button, you need to press either the A, B, C or blank macro button (depending on which button you are attempting to program).

*Note : The A, B, and C buttons are not

programmable if you have a digital cable box made by Pace, Pioneer, or Scientific-Atlanta cable box.

STEP1 Press the [CBL] button to select the

CABLE mode.

STEP2 Press a [MACRO] button and the

[SELECT/OK] button simultaneously for 3 seconds. The CBL device LED will turn on for 20 seconds. The next step must be performed while the LED is on.

STEP3 Press up to 10 buttons you wish to

store. The CBL device LED will blink once for each command entered.

STEP4 Press the [CH+] button to store the

functions that are selected. The CBL device LED will blink twice to confirm the storage of functions.

To erase the Macro programming and return to the original function:

STEP1 Press the [CBL] button to select the

CABLE mode.

STEP2 Press a [MACRO] button and the

[SELECT/OK] button simultaneously for 3 seconds. The CBL device LED will turn on for 20 seconds. The next step must be performed while the LED is on.

STEP3 Press the [CH+] button to erase the

functions stored in the button. The CBL device LED will blink twice to confirm that the memory button has been erased.

F. Assigning the Volume and Mute

keys to a Different Device

By default, the volume and mute keys operate volume and mute functions on the TV. If you would like those keys to operate those functions on a different device, follow these steps.

STEP1 Press the [SELECT/OK] button and

[CBL] button simultaneously for three seconds. The device LED will turn on for 20 seconds. The next step must be performed while the LED is on.

STEP2 Press the [VOL +] button. The device

LED will blink.

STEP3 Press the [DEVICE] button

corresponding to the device that you would like the volume and mute buttons to control. The device LED will blink twice to confirm the programming.

Example : If you wish to have the volume and

mute keys operate your cable box, press the [CBL] button in Step3.

G. Assigning the Channel keys to a

Different Device

By default, the CH UP, CH Down, Numeric buttons, and LAST keys operate through your Cable Box. If you would like those keys to operate those functions on a different device, follow these steps.

STEP1 Press the [SELECT/OK] button and

[CBL] button simultaneously for three seconds. The device LED will turn on for 20 seconds. The next step must be performed while the LED is on.

STEP2 Press the [VOL -] button. The device

LED will blink.

STEP3 Press the [TV] button. The device

LED will blink twice to confirm the programming.

*Note : If you wish to have the channel keys

operate your Cable box, press the [CBL] button instead of the [TV] button in Step 3.

Page 2

MOTOROLA DCT Series 002 GENERAL INSTRUMENT

CFT2200 002

JERROLD CFT2000 012

DRZ 024 DL4, DP(V), DQN(V), DPBB 025 DRX 027 Some Model 048

HAMLIN CR6000 042

CR6600, 6800,C R83 043 CRX5000 044

NSC IM781R 046

IM781 047

OAK

SIGMAONE, P1,P2,P3, SIGMA 2000

037 RTC56,RKDM 038 SIGMA 2001,2002 039 SIGMA 450,500,550 040

PACE 510 004 PANASONIC 140,145,170,175 030

110,120,130,150,160 031

PIONEER VOYAGER Series 001

BA9000 013 BA4100,4200,4500 028 BA-V1000 029

REGENCY ALL MODELS 045 SCIENTIFIC ATLANTA

EXPLORER Series 001 8600X 011 8600 021 8540,8570,8590 022 8500 023

SONY DHG-M55CV 003 TOCOM 5507 035

5503A 036

ZENITH MN2500 032

PM 033 Z-TAC 034

ADMIRAL 072 081 160 161 096 ADVENT 147 AIWA 141 145 AKAI 070 146 004 148 AKIO 103 ALARON 028 AMARK 112 143 AMERICA ACTION

043

MAKER(BRAND) NAME

CODE NUMBER (3 DIGIT) LIST

MAKER(BRAND) NAME

CODE NUMBER (3 DIGIT) LIST

MAKER(BRAND) NAME

CODE NUMBER (3 DIGIT) LIST

MAKER(BRAND) NAME

CODE NUMBER (3 DIGIT) LIST

MAKER(BRAND) NAME

CODE NUMBER (3 DIGIT) LIST

TV TV TV VCR & TV/VCR VCR & TV/VCR

MAKER(BRAND) NAME

CODE NUMBER (3 DIGIT) LIST

MAKER(BRAND) NAME

CODE No

CONVERTER

CABLE TV

AMPRO 073 167 ANAM 043 054 056 080 112 AOC 058 070 004 112 APEX DIGITAL 015 150 AUDIOVOX 076 103 043 BAYSONIC 043 BELL&HOWELL

072 BRADFORD 043 BROKSONIC 096 170 CAIRN 162 CANDLE 070 002 003 004 CAPEHART 058 CARVER 164 CELEBRITY 001 CETRONIC 043 CINERAL 103 120 CITIZEN 070 002 003 004 101 103 143 CLASSIC 043 CONCERTO 004 CONTEC 043 051 207 230 CORONADO 143 CRAIG 043 054 028 CROSLEY 164 CROWN 043 143 CURTIS MATHES

070 004 101 143 011 072 081 120 164 CXC 043 DAEWOO 076 103 112 004 127 143 016 043 044 125

120 114 215 229 DAYTRON 004 143 DENON 011 DUMONT 004 073 DWIN 161 DYNASTY 043 DYNATECH 062 209 ELECTROBAND

001 ELECTROHOME

024 076 143 EMERSON 005 028 043 047 048 076 096 155 004 051

143 151 153 154 216 230 ENVISION 070 FISHER 007 057 FUJITSU 164 197 028 157 149 FUNAI 028 043 052 168 FUTURETECH 043 GATEWAY 165 132 GE 070 073 130 144 160 161 004 008 009 034

056 074 091 155 081 120 GIBRALTER 004 073 GOLDSTAR 004 106 112 113 127 143 GRUNPY 028 043 HALL MARK 004 HARLEY DAVIDSON

028 HARMAN KARDON

211 164 HARVARD 043 HITACHI 004 007 009 011 072 010 012 023 075 143

158 208 INFINITY 164 INKEL 129 INTEQ 073 JBL 164 209 JCB 001 JCPENNEY 004 008 024 030 065 070 101 143 160 156 JENSEN 013 JVC 038 001 034 083 195 159 KENWOOD 070 001 KLOSS 002 059

KTV 070 043 143 154 LG 004 106 112 113 127 143 LODGENET 072 LOEWE 196 164 LOGIK 072 LUXMAN 004 LXI 007 015 052 081 160 164 MAGNAVOX 070 003 004 022 059 060 061 063 064 127

164 094 160 056 028 138 168 MAJESTIC 072 MARANTZ 164 070 MATSUI 164 MATSUSHITA 080 MEGATRON 004 MEMOREX 004 007 072 028 096 METZ 088 MGA 024 070 004 042 MIDLAND 073 MINERVA 088 MINUTZ 008 MITSUBISHI 109 024 042 004 040 146 028 226 081 200 MOTOROLA 081 MTC 070 004 062 101 209 229 MULTITECH 043 NAD 015 025 NEC 070 130 134 040 056 007 019 024 004 213

182 140 NIKEI 043 NIKKO 103 NTC 103 ONKING 043 ONWA 043 OPTIMUS 080 OPTONICA 019 081 ORION 096 201 202 203 204 205 028 PANASONIC 034 056 080 164 206 190 PHILCO 070 003 004 024 056 059 060 063 064 127

143 164 PHILIPS 164 005 038 093 127 070 003 004 059 199 PIONEER 023 025 135 176 004 018 070 183 191 PORTLAND 004 143 103 PRISM 034 PROSCAN 144 160 161 167 PROTON 004 058 143 171 173 193 QUASAR 034 056 RADIO SHACK 004 019 127 143 043 RCA 160 161 144 156 065 070 004 023 024 056

074 152 081 REALISTIC 007 019 RUNCO 072 073 130 179 180 181 SAMPO 070 004 058 165 SAMSUNG 004 101 127 133 143 160 089 105 070 184

185 192 SANSEI 120 SANSUI 096 SANYO 007 053 057 082 020 187 SCOTCH 004 SCOTT 004 005 028 043 048 143 SEARS 004 007 015 028 030 057 082 094 143 160

052 164 SELECO 189 SEMIVOX 043 SEMP 015 SHARP 081 014 019 028 004 022 143 SIGNATURE 072

SOLE 177 178 SONY 001 085 126 139 SOUNDESIGN 003 004 028 043 SPECTRICON 112 SQUAREVIEW 052 SSS 004 043 STARLITE 043 SUPRE MACY 002 SUPREME 001 SYLVANIA 070 003 059 060 063 064 127 160 164 044

056 210 168 SYMPHONIC 052 168 TANDY 081 TATUNG 056 062 209 TECHNICS 034 080 TECHNOL ACE 028 TECHWOOD 004 TEKNIKA 002 003 004 024 028 043 072 101 143 103

227 164 TELERENT 072 TERA 172 THOMPSON 166 TNCI 073 TMK 004 TOSHIBA 015 030 007 040 062 101 142 137 TOTEVISION 143 UNIVERSAL 008 009 VIDEO CONCEPTS

146 VIDIKRON 174 188 164 VIDTECH 004 WESTING HOUSE

076 WARDS 004 064 164 008 009 019 028 060 061 063

072 074 143 070 YAMAHA 004 070 YORK 004 YUPITERU 043 ZENITH 011 072 073 095 103 096 ZONDA 112

ADMIRAL 025 053 AIKO 117 AIWA 034 101 163 AKAI 016 043 046 124 142 146 AMERICA ACTION

117 AMERICAN HIGH

031 AMPRO 072 ANAM 031 ASHA 040 AUDIO DYNAMICS

012 023 039 043 AUDIOVOX 101 BEAUMARK 040 BROKSONIC 035 037 044 153 231 025 CALIX 101 CANON 028 031 CAPEHART 108 CCE 024 117 CINERAL 117 CITIZEN 101 117 COLT 024 CRAIG 003 040 022 024 101 CURTIS MATHES

031 041 154 CYBERNEX 040

PIONEER 021 013 048 PORTLAND 108 PROFITRONIC 040 PROTEC 024 QUARTZ 002 014 QUASAR 070 133 161 031 066 160 234 RADIO SHACK 123 034 RADIX 101 RANDEX 101 RCA 107 109 144 147 013 041 034 040 154 031

140 232 233 053 REALISTIC 003 008 010 014 031 034 040 053 054 101 RICO 058 SALORA 014 SAMSUNG 040 032 107 109 017 113 115 122 124 159 SANKY 053 SANSUI 043 048 022 034 153 025 SANYO 003 010 007 014 134 040 SCOTT 017 037 044 131 159 SEARS 003 008 009 010 013 014 017 081 101 031

034 SHARP 031 054 053 143 SHINTOM 024 SHOGUN 040 SIGNATURE 034 SINGER 024 SONY 001 057 058 003 052 031 155 034 SOUNDESIGN 034 STS 013 SYLVANIA 031 059 034 067 SYMPHONIC 034 TANDY 010 034 TATUNG 039 043 023 TEAC 034 039 043 023 TECHNICS 031 070 TEKNIKA 031 019 034 101 THOMAS 034 TMK 006 040 TOSHIBA 017 008 131 047 059 082 013 042 TOTEVISION 040 101 UNITECH 040 VECTOR RESEARCH

012 VIDEO CONCEPTS

012 046 034 141 VIDEOSONIC 040 WARDS 003 013 024 031 034 040 053 054 017 131 WESTING HOUSE

024 025 XR-1000 024 031 034 YAMAHA 012 043 034 039 ZENITH 072 080 001 048 034 101 058 025

ADCOM 203 AIWA 210 214 ALPINE 179 APEX DIGITAL 196 197 ARCAM 165 BOSE 244 245 CLASSE 242 CYBERHOME 170 DAEWOO 170 DENON 184 226 FUNAI 212 GE 188 189 GOLDSTAR / LG

182 194 GO VIDEO 228 GRADIENTE 243 HARMAN KARDON

217 HITACHI 181 HITEKER 197 INTEGRA 208 JVC 185 048 KENWOOD 166 KLH 230 KOSS 243 KRELL 218 LEXICON 216 MAGNAVOX 178 191 195 212 MARANTZ 176 177 MCINTOSH 167 MEMOREX 222 MERIDIAN 200 MINTEK 196 MITSUBISHI 186 MYRYAD 211 NAD 198 182 ONKYO 207 OPTIMUS 187 ORITRON 243 PANASONIC 173 192 219 PHILIPS 164 176 177 191 195 PIONEER 175 180 187 221 223 PROCEED 172 PROSCAN 188 189 RCA 188 189 SANSUI 201 SANYO 215 SAMSUNG 183 193 228 205 241 SHARP 174 SONY 168 190 213 SYLVANIA 212 SYMPHONIC 212 TAG McLaren 202 TECHNICS 173 THETA DIGITAL 187 TOSHIBA 169 171 191 227 201 VENTURER 229 VINK 220 YAMAHA 192 199 204 195 ZENITH 182 194

DAEWOO 117 005 116 007 010 108 110 017 DAYTRON 108 DIMENSIA 154 DBX 012 023 039 043 DYNATECH 034 053 ELECTROHOME

059 101

ELECTROPHONIC

101

EMERSON 006 029 035 025 027 034 036 037 046 101

131 138 017 031 044 153 157 231 117 FISHER 003 008 009 010 FUJI 031 FUNAI 034 GARRARD 034 GE 031 072 144 147 063 107 109 154 232 233

040 053 GO VIDEO 040 132 136 GOLDSTAR / LG

101 123 012 013 114 HARLEY DAVIDSON

034 HARMAN KARDON

012 045 HARWOOD 024 HITACHI 013 026 034 063 137 047 154 031 HUGHES 013 HQ 034 INSTANTREPLAY

031 JCL 031 JCPENNEY 012 013 040 101 154 066 031 234 JENSEN 043 JVC 048 050 043 130 060 012 031 047 055 158 KEC 101 117 KENWOOD 014 034 047 048 023 KLH 024 KODAK 031 101 LLOYD 034 LOGIK 024 LXI 034 003 009 017 101 MAGIN 040 MAGNASONIC 117 MAGNAVOX 067 031 034 041 068 154 160 212 MARANTZ 067 069 031 012 023 MARTA 101 MATSUI 027 030 MATSUSHITA 031 MEI 031 MEMOREX 101 003 010 014 031 034 053 072 139 134

234 025 040 MGA 045 046 059 040 MGN TECHNOLOGY

040 MINOLTA 013 154 MITSUBISHI 059 061 046 051 142 013 045 162 232 053 MOTOROLA 031 053 MTC 034 040 MULTITECH 024 034 NEC 012 023 043 048 039 NIKKO 101 NOBLEX 040 NORDMENDE 043 OLYMPUS 031 OPTIMUS 053 101 OPTONICA 053 054 ORION 153 231 025 PANASONIC 070 133 031 066 160 161 234 PENTAX 013 031 063 154 PHILCO 031 034 067 025 PHILIPS 031 067 034 101 054 071 PILOT 101

H. Low Battery Warning

When the battery is low (2.3V-2.0V) and needs to be replaced with fresh batteries, device LED will blink 2 times in sequence whenever a [DEVICE] button is pressed to turn on equipment.

I. Memory Lock System.

This remote control is designed to retain programmed memory for 10 years — even after batteries are removed from the remote control.

Set-up Code Tables

STEP1 Press the [CBL] button and the

[SELECT/OK] button simultaneously for 3 seconds. The device LED will turn on for 20 seconds. The next step must be performed while the LED is on.

STEP2 Press the [VOL+] button.

*Note : For TV/VCR & TV/DVD combination

units, Please use following steps to operate the volume control.

STEP3 Press the [VCR] button. The CBL

device LED will blink twice to confirm the programming.

MAKER(BRAND) NAME

CODE NUMBER (3 DIGIT) LIST

VCR & TV/VCR

MAKER(BRAND) NAME

CODE NUMBER (3 DIGIT) LIST

DVD & TV/DVD(VCR)

Universal Remote Control Easy Clicker UR3-SR Operating Manual

Specifications and Main Features

Frequently Asked Questions

User Manual