UNI-T UTG2000B Series Quick Manual

Quick Guide

UTG2000B Series

Function/Arbitrary Waveform Generator

2011.09.

UNI-T Technologies, Inc.

UTG2000B Series 1

Preface

Dear Users:

Hello! Thank you for choosing this brand new Uni-Trend device. In order to use this instrument

safely and correctly, please read this manual thoroughly, especially the Safety Notes part.

After reading this manual, it is recommended to keep the manual at an easily accessible place,

preferably close to the device, for future reference.

2 UTG2000B Series

Copyright Information

UNI-T is Uni-Trend Technology (China) Co.,Limited. All rights reserved.

UNI-T products are protected by patent rights in China and other countries, including issued and

pending patents.

Uni-Trend reserves the rights to any product specification and pricing changes.

Uni-Trend reserves all rights. Licensed software products are properties of Uni-Trend and its

subsidiaries or suppliers, which are protected by national copyright laws and international treaty

provisions. Information in this manual supersedes all previously published versions.

UNI-T is the registered trademark of Uni-Trend Technology (China)Co., Limited.

Uni-Trend warrants that this product will be free from defects for a three-year period. If the product

is re- sold, the warranty period will be from the date of the original purchase from an authorized

UNI-T

distributor. Probes, other accessories, and fuses are not included in this warranty.

If the product is proved to be defective within the warranty period, Uni-Trend reserves the rights to

either repair the defective product without charging any parts or labor, or exchange the defected

product to a working equivalent product. Replacement parts and products may be brand new, or

perform at the same specifications as brand new products. All replacement parts, modules, and

products are the property of Uni-Trend.

The “customer” refers to the individual or entity that is declared in the guarantee. In order to obtain

the warranty service, "customer" must inform the defects within the applicable warranty period to

UNI-T, and to perform appropriate arrangements for the warranty service. The customer shall be

responsible for packing and shipping the defective products to the designated maintenance center

of UNI-T, pay the shipping cost, and provide a copy of the purchase receipt of the original

purchaser . If the product is shipped domestically to the location of the UNI-T service center, UNI-T

shall pay the return shipping fee. If the product is sent to any other location, the customer shall be

responsible for all shipping, duties, taxes, and any other expenses.

This warranty shall not apply to any defects or damages caused by accidental, machine parts’ wear

and tear, improper use, and improper or lack of maintenance. UNI-T under the provisions of this

warranty has no obligation to provide the following services:

a) Repair any damage caused by the installation, repair, or maintenance of the product by non

UNI-T service representatives.

b) Repair any damage caused by improper use or connection to an incompatible device.

c) Repair any damage or malfunction caused by the use of a power source which does not

conform to the requirements of this manual.

d) Any maintenance on altered or integrated products (if such alteration or integration leads to

an increase in time or difficulty of product maintenance).

This warranty written by UNI-T for this product, and it is used to substitute any other expressed or

UTG2000B Series 3

implied warranties. UNI-T and its distributors do not offer any implied warranties for

merchantability or applicability purposes.

For violation of this guarantee, UNI-T is responsible for the repair or replacement of defective

products is the only remedy available to customers. Regardless of whether

UNI-T and its distributors are informed that any indirect, special, incidental, or consequential

damage may occur, the UNI-T and its distributors shall not be responsible for any of the damages.

4 UTG2000B Series

Introduction

This device is economical, high-performance, multi-functional single channel waveform generators.

It uses direct digital synthesis (DDS) technology to produce accurate and stable waveforms. It can

generate accurate, stable, pure and low distortion output signals; also can provide high-frequency

vertical edge square waves. UTG2000B’s convenient interface, superior technical indexes and

user-friendly graphical display style can help users to complete tasks quickly and improve work

efficiency.

Main Features

● Dual-channel with independent output mode

● Sampling rate of 1.28GSa/s and vertical resolution of 16bit

● Sine wave output of 120MHz/80MHz/60MHz, full-band resolution of 1μHz

● Square wave of 30MHz/25MHz/25MHz, minimum margin time can reach to 11ns and its rising,

● falling, and duty ratio time are adjustable

● Pulse waveform of 30MHz/25MHz/25MHz, adjustable time of rising, falling and duty ratio 2~16

independent harmonic waves in phase position

● Support 18 expressions of function, maximum length:160 characters

● Arbitrary wave storage of 8~16M points, 160 groups non-volatile waveform storage

● Storage up to 20MB (.bsv or.csv) or 7GB(optional)

● Rich modulation types：AM、FM、PM、ASK、FSK、PSK、BPSK、QPSK、OSK、

● SUM、DSBAM、QAM、PWM

● Support frequency scanning and burst output

● Dual channel can respectively or simultaneously: internal/external modulation, internal/

external/manual trigger

● Compatible 7 digits TTL level signal

● 4.3 inches TFT color screen with USB Host(max.32G), USB Device, LAN, 10MHz clock source

input, 10MHz clock source output

● Powerful upper computer software

● Easy-to-use multi-functional knob and numeric keypad