Unimac M30, UW100, UW80, UW125, UW35 User Manual
...
Value Line
®
On-Premises
Hardmount Washer-Extractors
UW35
UW60
UW80
UW100
UW125
M30 Control
Expert Solutions from the Laundry Experts
®
UniMac’s Value Line is high
Specifications
in quality, low in price.
When you need good quality, highly reliable laundry
equipment, our mid-featured Value Line will fit your
budget. This group of washer-extractors uses the same
A-frame design as our premium high performance
models. It also offers the same industry-leading three-
and five-year limited parts warranties. UniMac’s Value
Line cuts no corners in reliability! This is your best
choice to save capital on your initial investment.
Standard Features
• Energy Saving Drive
You get industry-leading technology, featuring a simple,
single motor with belt drive. With our mid-featured drive,
you get five speeds, including a two wash speed.
• High Speed Extract
UniMac has built its reputation on offering industryleading extraction speeds. The higher G-Force created
during extraction removes more water, thereby reducing
drying time. Our mid-level, 180 G-Force is high compared
to many competitive models. It also can be programmed
at lower speeds for 100% polyester fabrics.
• M30 Programmable Control (PDA/PC or manual)
With 30 preset cycles, this control provides ultimate flexibility.
Special features such as cycle time remaining, cycle counter,
test-cycle for diagnostics, 1/2 speed wash for delicate items
make this control a great value. Also included are 30 water
levels and eight fill segments choices. Our special water
management leak detection system wil assist in further
reducing water use.
• Fill Valves
The two brass fill valves are the same high quality components
used in our premium models.
• Supply Dispenser
The Value Line offers four liquid signals for automated
dispensing. It also can be used as a dry supply dispenser
with five flushing compartments.
UW35 M30 UW60 M30 UW80 M30 UW100 M30 UW125 M30
Capacity - lb (kg) 35 (15.9) 60 (27.3) 80 (36.4) 100 (45.5) 125 (56.9)
idth - in (mm) 32 1/2" (826) 36 5/8" (930) 41 1/2" (1054) 41 1/2" (1054) 48" (1219)
W
epth - in (mm) 38 1/4" (972) 45" (1143) 51 1/2" (1308) 54 1/2" (1384) 58" (1473)
D
eight - in (mm) 55 1/2" (1410) 64 1/2" (1638) 68 1/2" (1740) 68 1/2" (1740) 72" (1829)
H
ylinder Diameter - 26 1/4" (667) 32" (813) 36" (914) 36" (914) 42" (1067)
C
n (mm)
i
ylinder Depth - 18 3/8" (467) 20" (508) 21" (533) 27" (686) 24" (610)
C
n (mm)
i
ylinder Volume - 5.76 (163) 9.31 (264) 12.4 (350) 15.9 (450) 19.4 (544)
C
u. ft. (liters)
c
oor Opening - 14 3/8" (364) 17 1/2" (445) 17 1/2" (445) 17 1/2" (445) 20" (508)
D
n (mm)
i
oor Bottom 23 3/4" (603) 28 1/4" (718) 29" (737) 29" (737) 29" (737)
D
o Floor - in (mm)
t
ash Speed - RPM 42 40 40 40 37
W
istribution Speed - 83 71 73 70 62
D
PM
R
igh 1 Extract - 328 (40) 297 (40) 280 (40) 280 (40) 260 (40)
H
PM (G-Force)
R
igh 2 Extract - 534 (106) 483 (106) 456 (106) 456 (106) 422 (106)
H
RPM (G-Force)
igh 3 Extract - 695 (180) 630 (180) 594 (180) 594 (180) 550 (180)
H
RPM (G-Force)
ater Inlet 3/4" (19) 3/4" (19) 3/4" (19) 3/4" (19) (2 ea) 1" (25)
W
Connection - in (mm)
Steam Connection - 1/2" (13) 1/2" (13) 1/2" (13) 1/2" (13) 3/4" (19)
in (mm)
Drain Diameter - 2.4" (60) 3" (76) 3" (76) 3" (76) 3" (76)
in (mm)
Motor Size - HP (kW) 2.3 (1.7) 3.0 (2.2) 5.0 (3.7) 5.0 (3.7) 7.5 (5.6)
Shipping
Dimensions in (mm)
Net Weight - lb (kg) 750 (341) 1079 (490) 1644 (747) 1680 (762) 2211 (1005)
Shipping Weight - 800 (361) 1268 (575) 1705 (773) 1745 (792) 2525 (1148)
lb (kg)
Agency Approvals*
* Agency approvals may vary depending on configuration. Consult factory for details.
For electrical specifications, circuit breaker requirements and full load amperages, see your
authorized UniMac distributor. Manufacturer strongly recommends using a circuit breaker
instead of fuses. Use 3-pole circuit breakers for 3-phase machines.
For the most accurate information, the installation guide should be used for all design and construction purposes. Due to continuous product improvements, design and specifications subject
to change without notice. The quality management systems at all Alliance Laundry Systems’ Ripon
facility has been registered to ISO 9001:2000.
©Copyright 2009 Alliance Laundry Systems LLC
H 64" (1630) 74 1/2" (1892) 77 1/4" (1962) 77 1/4" (1962) 77 3/4" (1980)
W 38" (970) 40" (1016) 44" (1118) 44" (1118) 61 1/2" (1560)
D 47" (1200) 49" (1245) 60 1/2" (1537) 60 1/2" (1537) 60" (1520)
usETLc, CE usETLc, CE usETLc, CE usETLc, CE usETLc, CE
A 5-year limited warranty is issued on the frame, basket, shaft, bearings and
seals if failure or breakage should occur during normal operation due to defects
in material or workmanship that would prohibit its further use. A full 3-year
warranty also is issued to the original purchaser on all parts. Labor not included.
No wonder UniMac is America’s No. 1 selling washer!
www.unimac.com
AU09-202
Shepard Street, Ripon, WI 54971 Telephone: 1-800-587-5458
Alliance Laundry Systems
Loading...