Unimac 35 LB User Manual

UW Series Hardmount

Washer-Extractors

35 lb Washer-Extractor
60 lb Washer-Extractor

80 lb Washer-Extractor
100 lb Washer-Extractor
125 lb Washer-Extractor
150 lb Washer-Extractor

Expert Solutions from the Laundry Experts

Your

Your

Solution

Solution

Starts Here

Starts Here

5

5

key points:

Labor-Cost Savings

Utility-Cost Savings

Value For Your Money

Proven Performance

Warranty

Labor-Cost Savings

Did you know labor costs eat up 50% of your laundry
dollar? Imagine the thousands of dollars you’d save if you
could reduce your laundry labor by 30 minutes per day!

UniMac’s UWTV Series Washer-Extractor transforms your
dream into reality.

Four Fast-Fill Water Valves (instead of the customary

I

two) fill UWTV models much faster, shaving valuable
minutes off every cycle.

Extraction Speeds of up to 300 G-Force — that’s

I

2-3 times the G’s of most machines — aid UniMac’s
UWTV models in reducing the amount of moisture left
in washloads. This greatly reduces drying time, saving
significantly on labor costs.

I

are used each time. The management reports provide
time and date stamps of each cycle, including the idle
time between cycles. The UniLinc™ control is your
laundry partner helping lower labor costs.

I

This is one of UniMac’s most impressive
timesaving features.

The UWTV Overnight Delayed Start feature gives

I

you a 30-minute head start each day! By loading
the washer and selecting the programmable delayed
start cycle, your linens will be ready for the dryer im­mediately the next morning.

UWTV models can be programmed with the

I

shortest wash cycles in the industry. When the

four Fast-Fill Water Valves are combined with
Rapid Jetspray Rinse, Smart Drain, and our end-

of-Cycle Rotation Sensor, you will cut laundry op­erating time. Saving time will save labor costs.

A Rapid Jetspray Rinse saves nearly
three minutes on every rinse step!
The spray rinse pulls water through
linens, allowing it to drain immediately,
rather than cycling through the time­consuming fill, agitation and drain
phases of the traditional bath rinse.

Advanced Computer
Control, UniLinc™ boldly

displays cycle time remaining
tomore efficiently utilize labor.
The easy-to-use display
makes training simple, and
ensures the proper cycles

Utility-Cost Savings

Utility costs account for approximately 10% of your laun­dry dollar. By selecting laundry equipment with advanced
features, utility costs can be controlled. If a typical laundry
facility processes around 4,000 cycles per year, even small
savings per cycle will really add up. UniMac’s UWTV series
has the solution for controlling your utility costs:

Electricity

Save 40% or more with our state-of-the-art

Frequency Drive System. It saves money by

gradually and efficiently ramping up to extrac­tion speed. You’ll also save electricity with our
industry-leading short cycle times
created with our Rapid Jetspray Rinse, four
Fast-Fill Water Valves and Smart Drains.

Gas

Dryer time is shorter due to 300 G-Force super-high ex­traction speeds. By operating your dryer less each day, you
reduce your cost of energy by $100’s per year.

Water

Large wash capacity and UniLinc’s 30 programmable water
levels can save thousands of gallons of water
annually. These savings can be as much as 10% versus
competitors’ models. Our special water management leak
detection system wil assist in further reducing water use.

Conserve. Save. Green.

Long before “being green” be­came trendy, UniMac was mar­keting energy and water saving
products for the commercial laun­dry industry. Today, we’ve taken our green story further
with the cutting-edge UniLinc
tors. This control, combined with the other energy-saving
features on our washers, can help laundries make tremen­dous strides toward energy and water conservation. Add
a highly efficient hot water heater and fast-drying UniMac
tumbler, and your facility has all the pieces in place for an
eco-friendly laundry.

TM

control for washer-extrac-

Value For Your Money

Often the lowest-priced laundry equip­ment ends up being the most
expensive to own in terms of mainte­nance, performance and ease-of-use.
One way of measuring a washer-ex­tractor’s value is to take a look at stan-

dard features.

Important standard features include:

I

Temperature Controlled Fill

I

Overflow Rinse

I

Brass Fill Valves

I

Polypropylene Chemical
Supply Dispenser

I

Programmable Drive
System

I

Two Wash Speeds
(TV Models)

I

Laundry Operation
Reports

Proven Perform­ance

You want your decision to be a last­ing one, so choose a washer-ex­tractor that is durable and
virtually maintenance-free, with a
proven performance history.
You won’t find another washer­extractor with the durability and
performance record of UniMac’s UWTV series.

Our heavy-duty Gamma A-frame, made of 4" H-beam,
has been the industry model of strength and durability.
Our low maintenance V-Belt Drive provides high-
efficiency, dependability and smooth operation, without
unnecessary transmissions or clutches. With fewer
moving parts, our drive system requires less maintenance.

UniMac’s expertise is the result of over 60 years as the
leader in technological innovation. We’ve led the industry
in developing technologically advanced solutions, such as

Microprocessor Controls, Frequency Drive System,
Rapid Jetspray Rinse, Super-high G-Force and two
wash speeds.

We receive high marks from our customers and peers
within the commercial laundry industry, and most agree:
UniMac is the industry leader because we’ve set the stan­dards for quality with products guaranteed to lower costs
and constructed to perform every time!

Warranty

Our warranty is your insurance policy. We demonstrate our
confidence in our UWTV by giving you the best
warranty in the industry. UniMac provides a five-year

warranty on the frame, basket, shaft, bearings and
seals if failure or breakage should occur during normal

operation due to defects in material or workmanship.
A full three-year warranty also is is­sued to the original purchaser
on all other parts.

®

Specifications

W35 UW60 UW80 UW100 UW125 UW150

U

Control Options UniLinc™ UniLinc™ UniLinc™ UniLinc™ UniLinc™ UniLinc™

Capacity - lb (kg) 35 (16) 60 (27) 80 (36) 100 (45) 125 (57) 150 (68)

Cylinder Diameter - 26 1/4"(667) 32"(813) 36"(914) 36"(914) 42"(1067) 43"(1093)
in (mm)

Cylinder Depth- in (mm) 18 3/8"(467) 20"(508) 21"(533) 27"(686) 24"(610) 2

Cylinder Volume - 5.76 (163) 9.31 (264) 12.4 (350) 15.9 (450) 19.24 (544) 23.38 (662)
cu. ft. (liters)

Height - in (mm) 55 1/2"(1410) 64 1/2"(1638) 68 1/2"(1740) 68 1/2"(1740) 72"(1829) 79"(

Width - in (mm) 32 1/2"(826) 36 5/8"(930) 41 1/2"(1054) 41 1/2"(1054) 48"(1219) 50"(1270)

Depth - in (mm) 38 1/4"(972) 45"(1143) 51 1/2"(1308) 54 1/2"(1384) 58"(1473) 63

Door Opening Size - 14 3/8"(364) 17 1/2"(445) 17 1/2"(445) 17 1/2"(445) 20"(508) 2
in (mm)

Door Bottom To Floor - 23 3/4"(603) 28 1/4"(718) 29"(737) 29"(737) 29"(737) 32
in (mm)

Motor Size - HP (kW) 3 (2.2) 5 (3.7) 7.5 (5.6) 7.5 (5.6) 10 (7.5) 10 (7.5)

V Sp L Sp M Sp V Sp V Sp V Sp V Sp V Sp

Total # of Speeds 8568 8 88 8

Gentle 26 (.25) 26 (.31) 26 (.31) 26 (.31) 26 (.35) 26 (.35) 26 (.40) 23 (.32)

Wash 44 (.73) 40 (.73) 40 (.73) 40 (.73) 40 (.80) 40 (.80) 37 (.80) 36 (.80)

Distribution 83 (2.55) 71 (2.3) 71 (2.3) 71 (2.3) 70 (2.5) 70 (2.5) 62 (2.3) 61 (2.3)

Cylinder
Speed ­RPM (G-Force)

ery Low

V

Medium 695 (180) — 630 (180) 630 (180) 594 (180) 594 (180) 550 (180) 543 (180)

High 803 (240) ——727 (240) 686 (240) 686 (240) 565 (190) 627 (240)

Very High 898 (300) ——813 (300) 766 (300) 766 (300) 579 (200) 701 (300)

401 (60) 364 (60) 364 (60) 364 (60) 343 (60) 343 (60) 317 (60) 314 (60)

Low 568 (120) 470 (100) 514 (120) 514 (120) 485 (120) 485 (120) 449 (120) 444 (120)

Drain Diameter - 1 @ 2 3/8"(60) 1 @ 3"(76) 2 @ 3"(76) 2 @ 3"(76) 2 @ 3"(76) 2 @ 3"(76)
in (mm)

Steam Connection - 1/2"(13) 1/2"(13) 1/2"(13) 1/2"(13) 3/4"(19) 3/4"(19)
in (mm)

Water Inlet Connection - 4 @ 3/4"(19) 4 @ 3/4"(19) 4 @ 3/4"(19) 4 @ 3/4"(19) 2 @ 3/4"(19) 2 @ 3/4"(19)
in (mm) 2 @ 1"(25) 2 @ 1"(25)

Net Weight - lb (kg) 1030 (468) 1300 (785) 1730 (785) 1770 (805) 2420 (1100) 2970 (1347)

Agency Approvals*

ETLus, CE

c

ETLus, CE

c

ETLus, CE

c

ETLus, CE

c

ETLus, CE

c

* Agency approvals may vary depending on configuration.

Consult factory for details. Standard domestic voltage 208-240/60/3. 230V/50Hz/1&3 phase and 380V/50Hz/3 phase units are available. All CE approved models
available in 50-cycle. Contact your distributor for specific models available with CE. For electrical specifications, circuit breaker requirements and full load amperages, see
your authorized UniMac distributor. Manufacturer strongly recommends using a circuit breaker instead of fuses. Use 3-pole circuit breakers for 3-phase machines.

For the most accurate information, the installation guide should be used for all design and construction purposes. Due to continuous product improvements, design and
specifications subject to change without notice. The quality management systems at all Alliance Laundry Systems’ Ripon facility has been registered to ISO 9001:2000.

©Copyright 2009 Alliance Laundry Systems LLC

Printed in the U.S.A.

7 13/16" (706)

2007)

" (1600)

4 3/4" (629)

" (813)

ETLus, CE

c

AU09-203

www.unimac.com

Shepard Street, Ripon, WI 54971 Telephone: [phone]

Alliance Laundry Systems