U-Line UHBD524SG41A User Guide

0 (0)
U-Line UHBD524SG41A User  Guide

USER GUIDE & SERVICE MANUAL

5 Class UHBD524 24” Dual Zone Beverage Center

USER GUIDE & SERVICE MANUAL

u-line.com

Table of Contents

Intro

Warranty Claims

 

Warranty

Safety

 

Safety and Warning

 

Disposal And Recycling

 

Installation

 

Environmental Requirements

 

Electrical

 

Cutout & Product Dimensions

 

Side by Side Installation

 

Anti-Tip Bracket

 

General Installation

 

Grille Installation

 

Door Swing

 

Door Adjust

 

Interior Adjustments

 

Maintenance

 

Cleaning

 

Cleaning Condenser

 

Extended Non-Use

 

Operating Instructions

 

First Use

 

Control Operation

 

Airflow and Product Loading

 

Service

 

Troubleshooting

 

Product Liability

 

 

 

USER GUIDE

u-line.com

WELCOME TO U-LINE

Congratulations on your U-Line purchase. Your product comes from a company with over five decades of premium modular ice making, refrigeration, and wine preservation experience. U-Line continues to be the American leader, delivering versatility and flexibility for multiple applications including residential, light commercial, outdoor and marine use. U-Line’s complete product collection includes Wine Captain® Models, Beverage Centers, Clear Ice Machines, Nugget Ice Machines, Crescent Ice Makers, Glass & Solid Door Refrigerators, Drawer Models, Freezers, Combo® Models, and more.

U-Line has captivated those with an appreciation for the finer things with exceptional functionality, style, inspired innovations and attention to even the smallest details. We are known and respected for our unwavering dedication to product design, quality and selection. U-Line is headquartered in Milwaukee, Wisconsin and has shipped product to five continents for over two decades and is proud to have the opportunity to ship to you.

PRODUCT INFORMATION

Looking for additional information on your product? User Guides, Spec Sheets, CAD Drawings, Compliance Documentation, and Product Warranty information are all available for reference and download at u-line.com.

PROPERTY DAMAGE / INJURY CONCERNS

In the unlikely event property damage or personal injury is suspected related to a U-Line product, please take the following steps:

1.U-Line Customer Care must be contacted immediately at +1.800.779.2547.

2.Service or repairs performed on the unit without prior written approval from U-Line is not permitted. If the unit has been altered or repaired in the field without prior written approval from U-Line, claims will not be eligible.

GENERAL INQUIRIES

U-Line Corporation

8900 N. 55th Street

Milwaukee, Wisconsin 53223 USA Monday - Friday 8:00 am to 4:30 pm CST T: +1.414.354.0300

F: +1.414.354.7905 Email: sales@u-line.com u-line.com

CONNECT WITH US

SERVICE & PARTS ASSISTANCE

Monday - Friday 8:00 am to 4:30 pm CST T: +1.800.779.2547

F: +1.414.354.5696

Service Email: onlineservice@u-line.com Parts Email: onlineparts@u-line.com

Designed, engineered and assembled in WI, USA

Introduction

3

USER GUIDE

u-line.com

Safety and Warning

NOTICE

Please read all instructions before installing, operating, or servicing the appliance.

Use this appliance for its intended purpose only and follow these general precautions with those listed throughout this guide:

SAFETY ALERT DEFINITIONS

! DANGER

This unit contains R600a (Isobutane) which is a flammable hydrocarbon. It is safe for regular use. Do not use sharp objects to expedite defrosting. Do not service without consulting the

“R600a specifications” section included in the

User Guide. Do not damage the refrigerant circuit.

Throughout this guide are safety items labeled with a Danger, Warning, or Caution based on the risk type:

! DANGER

Danger means that failure to follow this safety statement will result in severe personal injury or death.

! WARNING

Warning means that failure to follow this safety statement could result in serious personal injury or death.

! WARNING

Service must be done by factory authorized service personnel. Any parts shall be replaced with like components. Failure to comply could increase the risk of possible ignition due to incorrect parts or improper service.

CALIFORNIA PROPOSITION 65

This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm.

www.P65warnings.CA.gov

! CAUTION

Caution means that failure to follow this safety statement may result in minor or moderate personal injury, property, or equipment damage.

! CAUTION

This equipment is to be installed with adequate backflow protection to comply with applicable federal, state and local codes.

Safety and Warning

4

USER GUIDE

u-line.com

Disposal and Recycling

! DANGER

RISK OF CHILD ENTRAPMENT. Before you throw away your old refrigerator or freezer, take off the doors and leave shelves in place so children may not easily climb inside.

If the unit is being removed from service for disposal, check and obey all federal, state, and local regulations regarding the disposal and recycling of refrigeration appliances, and follow these steps completely:

1.Remove all consumable contents from the unit.

2.Unplug the electrical cord from its socket.

3.Remove the door(s)/drawer(s).

Disposal and Recycling

5

USER GUIDE

u-line.com

Environmental Requirements

This model is intended for indoor/interior applications only and is not to be used in installations that are open/ exposed to natural elements.

This unit is designed to operate between 50°F (10°C) and 100°F (38°C). Higher ambient temperatures may reduce the unit’s ability to reach low temperatures and/or reduce ice production on applicable models.

For best performance, keep the unit out of direct sunlight and away from heat generating equipment.

In climates where high humidity and dew points are present, condensation may appear on outside surfaces. This is considered normal. The condensation will evaporate when the humidity drops.

! CAUTION

Damages caused by ambient temperatures of 40°F (4°C) or below are not covered by the warranty.

Environmental Requirements

6

USER GUIDE

u-line.com

Electrical

! WARNING

SHOCK HAZARD — Electrical Grounding Required. Never attempt to repair or perform maintenance on the unit until the electricity has been disconnected.

Never remove the round grounding prong from the plug and never use a two-prong grounding adapter.

Altering, cutting or removing power cord, removing power plug, or direct wiring can cause serious injury, fire, loss of property and/or life, and will void the warranty.

Never use an extension cord to connect power to the unit.

Always keep your working area dry.

NOTICE

Electrical installation must observe all state and local codes. This unit requires connection to a grounded (three-prong), polarized receptacle that has been placed by a qualified electrician.

The unit requires a grounded and polarized 115 VAC, 60 Hz, 15A power supply (normal household current). An individual, properly grounded branch circuit or circuit breaker is recommended. A GFCI (ground fault circuit interrupter) is usually not required for fixed location

appliances and is not recommended for your unit because it could be prone to nuisance tripping. However, be sure to consult your local codes.

See CUTOUT & PRODUCT DIMENSIONS for recommended receptacle location.

Electrical

7

USER GUIDE

u-line.com

Cutout & Product Dimensions

 

 

 

 

 

 

 

 

 

23 ⁄ ”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PREPARE SITE

 

 

 

 

 

 

 

 

 

(600 mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Your U-Line product has been designed for either free-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

standing or built-in installation. When built-in, your unit

FRONT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

does not require additional air space for top, sides, or

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

rear. However, the front grille must NOT be obstructed,

 

 

 

 

 

28”

 

 

 

 

 

 

33 ⁄ ” to

34 ⁄ ”

 

 

 

 

 

 

 

 

 

 

 

 

(855 mm to

 

 

 

 

(711 mm)

 

 

 

 

 

 

and clearance is required for an electrical connection in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

881 mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the rear.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

! CAUTION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3 ½”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Unit can NOT be installed behind a closed cabinet

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(89 mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

door.

CUTOUT DIMENSIONS

 

Preferred location

 

 

for electrical outlet

 

 

is in adjacent

 

 

cabinet.

24"

 

5/8"

 

(16 mm)

(610 mm)

33 7⁄8"

 

 

(860 mm)

 

 

to

7"

 

34 7⁄8"

 

(886 mm)

(178 mm)

 

 

4"

 

 

(102 mm)

 

 

23 7/8"

 

 

(607 mm)

 

PRODUCT DIMENSIONS

REAR

Power Cord

6 ft (183 cm) 11 ¾”

(298 mm)

1 ⁄ ”

(35 mm)

TOP

SIDE

18 ⁄ ”

(481 mm)

21 ⁄ ”

(535 mm)

1 ⁄ ”

(48 mm)

26 ⁄ ”

(664 mm)

 

22 ⁄ ” *

24 ⁄ ”

(583 mm)

(630 mm)

 

 

8 / ”

 

(210 mm)

 

14 ⁄ ”

 

(368 mm)

17 / ”

(445 mm)

3 ⁄ “ (89 mm) *

*Add 1⁄2” for integrated models with 3⁄4” panel installed.

Cutout & Product Dimensions

8

USER GUIDE

Side-by-Side Installation

OTHER SITE REQUIREMENTS Side-by-Side Installation

Units must operate from separate, properly grounded electrical receptacles placed according to each unit’s electrical specifications requirements.

Cutout width for a side-by-side installation is the total of the widths listed under Cutout Dimensions in each unit’s Installation Guide. Each door can be opened individually (one at a time) without interference.

However, to ensure unobstructed door swing (opening both doors at the same time), 1/4" (6.4 mm) of space needs to be maintained between the units.

1/4" (6 mm)

u-line.com

Hinge-by-Hinge Installation (Mullion)

When installing two units hinge-by-hinge, 13/16" (22 mm) is required for integrated models. Additional space may be needed for any knobs, pulls or handles installed.

13/16" (22 mm)

Stainless steel models which include the standard stainless handle will require 4-9/16" (116 mm) to allow both doors to open to 90° at the same time.

4-9/16" (116 mm)

Side-by-Side Installation

9

Loading...
+ 20 hidden pages