U-Line CO2175FF User Manual

Use and Care Guide

Combo® Ice Maker/Refrigerator Model:
CO2175FF

Refrigerator/Freezer Model:
2175RF

CO2175FF 2175RF

1 Introduction

Congratulations on your purchase of a U-Line refrigeration product. A pioneer in the field for more than 40 years, U-Line
Corporation is the world’s number one manufacturer of built-in, under-counter, specialty refrigeration and ice making
products. U-Line dedicates 100% of its research and development to these products. The result: U-Line technology
consistently leads the market with innovation, design, depth of product line and performance.

U-Line products are making life more convenient in homes, businesses, and hotels around the world. U-Line supports its
products with a strong dealer network, and its commitment to quality even extends to environmentally safe packaging.

IMPORTANT

READ all of the instructions in this guide completely before operating the unit for the first time.

For future reference, keep this guide in a safe, accessible location. If you need additional information or assistance,
please contact U-Line Corporation directly. Contact information appears on the rear cover of this guide.

If you have a problem with the operation of this product, the SERVICE section of this guide will assist you in quickly
identifying common problems and provide information on possible causes and remedies. If your product needs service,
contact U-Line directly.

Warranty Registration

Your U-Line Corporation Limited Warranty is located on the inside rear cover of this guide. To validate your warranty, the
product and its original purchase date must be registered. A Warranty Registration Card has been included for this
purpose in the package containing this manual. Complete and mail the Warranty Registration Card, or register your
product online at www.U-LineService.com as soon as possible after purchase.

If your product registration is not on file and a request for warranty coverage is received, the date of sale to the U-Line
Selling Dealer or Distributor will be established as the first date of warranty coverage for your product.

Please Record Your Model Information

When you request additional information or service, you will be asked for your products model and serial numbers. You
can find this information on the serial plate located on the upper right or rear wall in the interior of your unit. This
information also appears on the warranty registration card.

1

ULIN_0023_A

Figure 1

Please record the model number (Figure 1, 1), serial number (Figure 1, 2), date of purchase, and dealer contact
information for your U-Line product below:

Model Number:

_____________________________________________________

Serial Number:

_____________________________________________________

Purchase Date:

_____________________________________________________

Dealer Name:

_____________________________________________________

Dealer Address:

_____________________________________________________

Dealer Telephone:

_____________________________________________________

2

2 CO2175FF, 2175RF

2 Table of Contents

Introduction ...............................................................................................................................2

Warranty Registration .......................................................................................................2

Please Record Your Model Information ...........................................................................2

Table of Contents .......................................................................................................................3

Safety Precautions ......................................................................................................................5

Safety Alert Definitions .....................................................................................................5

General Precautions ...........................................................................................................5

Product Features ........................................................................................................................6

Échelon Model 2175RF Refrigerator/Freezer, Model CO2175FF Ice Maker/

Refrigerator ........................................................................................................................6

Operation ...................................................................................................................................7

Initial Startup .....................................................................................................................7

Temperature Control .........................................................................................................7

Interior Lighting .................................................................................................................8

Electronic Control Panel ....................................................................................................8

Ice Maker ............................................................................................................................9

Normal Operating Sounds .................................................................................................9

Food Storage ....................................................................................................................10

Outdoor, Marine and RV Usage ......................................................................................10

Storage, Vacation, Moving ..............................................................................................10

Product Disposal ...............................................................................................................11

Cleaning and Maintenance .....................................................................................................11

General Cleaning .............................................................................................................11

Maintenance ....................................................................................................................12

Service .......................................................................................................................................18

Before Calling for Service ................................................................................................18

If Service is Required ........................................................................................................18

Replacement Parts ...........................................................................................................18

Troubleshooting Guide ....................................................................................................19

Electronic Control Quick Guide .......................................................................................21

U-Line Corporation Limited Warranty ....................................................................................23

CO2175FF, 2175RF 3

This page intentionally left blank

4 CO2175FF, 2175RF

3 Safety Precautions

IMPORTANTIMPORTANT

PLEASE READ all instructions completely before
attempting to install, operate, or service your unit.

• Proper installation procedures must be followed
if this unit is being initially installed, or is moved
to a new location after being in service. An
INSTALLATION GUIDE for your unit, providing
complete installation information is available
from U-Line Corporation directly, and must be
consulted before any installation is begun. U-Line
contact information appears on the rear cover of
this guide.

• This unit requires connection to a grounded
(three-prong), polarized receptacle that has been
placed by a qualified electrician in accordance
with applicable electrical codes.

WARNING

SHOCK HAZARD - Electrical Grounding Required.

• Never attempt to repair or perform
maintenance on the unit until the electricity
has been disconnected.

• Never remove the round grounding prong from
the plug and never use a two-prong grounding
adapter.

• Altering, cutting of power cord, removal of
power cord, removal of power plug, or direct
wiring can cause serious injury, fire and/or loss
of property and/or life, and will void the
warranty.

• Never use an extension cord to connect power
to the unit.

• Always keep your working area dry.

CAUTION

Safety Alert Definitions

Safety items throughout this guide are labeled with a
Danger, Warning or Caution based on the risk type:

DANGER

Danger means that failure to follow this safety
statement will result in severe personal injury or
death.

WARNING

Warning means that failure to follow this safety
statement could result in serious personal injury
or death.

CAUTION

Caution means that failure to follow this safety
statement may result in minor or moderate
personal injury, property or equipment damage.

General Precautions

Use this appliance for its intended purpose only and
follow these general precautions along with those listed
throughout this guide:

• Use care when moving and handling the unit. Use
gloves to prevent personal injury from sharp
edges.

• If your model requires defrosting, DO NOT use any
type of heater to defrost. Using a heater to speed
up defrosting can cause personal injury and
damage to the inner lining.

IMPORTANTIMPORTANT

• Do not lift unit by door handle.

• Never install or operate the unit behind closed
doors. Be sure front grille is free of obstruction.
Obstructing free air flow can cause the unit to
malfunction and may void the warranty.

• Failure to clean the condenser every three months
can cause the unit to malfunction. This could void
the warranty.

• Allow unit temperature to stabilize for 24 hours
before use.

• If your model requires defrosting, never use an
ice pick or other sharp instrument to help speed
up defrosting. These instruments can puncture
the inner lining or damage the cooling unit.

• Use only genuine U-Line replacement parts.
Imitation parts can damage the unit, affect its
operation or performance and may void the
warranty.

DANGER

RISK OF CHILD ENTRAPMENT. Before you throw away
your old refrigerator or freezer, take off the doors
and leave shelves in place so that children may not
easily climb inside.

CO2175FF, 2175RF 5

4 Product Features

Échelon Model 2175RF Refrigerator/
Freezer, Model CO2175FF Ice Maker/
Refrigerator

Exclusive Features of Échelon

• Both models feature Frost Free technology and a 5.7 cu
ft (161 L) capacity.

• An electronic control panel with digital display allows
you to display the interior temperature and adjust the
setting to your preference. The electronic control and
digital display provide an attractive appearance, and its
method of control provides precise temperature
settings.

• An interior light will illuminate automatically as the
cabinet door is opened. However, you can easily select
another mode of operation. A blackout/Sabbath mode
(not Star K certified) allows you to darken both interior
light and the LED display, while maintaining complete
temperature control in the unit for 36 hours.

• A new condenser design optimizes product
performance and energy efficiency while providing
further reductions in noise levels.

• A new evaporator and improved refrigeration system
design provide freezer temperatures between -5 and
+5°F, and consistent temperature control in the
refrigerator.

• Model 2175RF features a large vertically designed
freezer compartment that provides more storage space
and easier accessibility to the products within the
freezer compartment. A removable white vinyl coated
wire shelf can divide the compartment in half, allowing
products to be placed underneath and on top of the
shelf for more organized storage.

• Model CO2175FF features an ice maker with a daily
production capacity of 8 lbs (3.6 kg), and storage for 13
lbs (5.9 kg).

• Three fully encapsulated, contoured shelves contain
spills and are easy to clean.

• Recessed shelf channels, supporting the encapsulated
shelves, provides a sleek, clean appearance to the
interior of the cabinet by eliminating protruding shelf
supports.

• A removable, clear lower crisper drawer optimizes the
organization of product stored in the crisper. The
crisper may also be used to transport its contents to a
cooking or serving area.

• Two contoured inner door "pick-off" shelves are
adjustable for storage of a variety of different bottle,
can, and container sizes and shapes.

• The lower inner door shelf accommodates a two liter
or 750 mL bottle.

• Self-closing door hinges engage when the door is open
approximately 8-10 in. (20-25 cm), ensuring a positive
door seal and preventing door bounce back.

• Black and white models feature a slightly contoured,
across the top, integrated door handle design that
permits the door to be easily reversed. The doors come
standard with a factory installed flush panel. They can
accommodate a 1/4 in. (0.64 cm) thick custom panel to
achieve a custom, built-in look by matching
surrounding cabinets.

• An optional full overlay door panel kit for black and
white units, using a customer provided 3/4 in. (1.9 cm)
thick panel, is available that provides a fully integrated
appearance with surrounding cabinets. The overlay
panel is easily attached to the door.

• Black and white models feature a vinyl clad steel
cabinet that provides a rich textured look, and resists
scratching, peeling and flaking.

• All stainless steel models have a full wrap stainless steel
cabinet, stainless steel hinges, and a full wrap stainless
steel door with sculpted stainless steel handle.

• Stainless steel models are suitable for outdoor use by
UL.

Features and specifications are subject to change without
notice.

6 CO2175FF, 2175RF

5 Operation

ULIN_0080_A

Figure 2

IMPORTANTIMPORTANT

Proper air flow (Figure 2) is required for your unit to
operate at its highest efficiently. A grille, located in
the base of the unit, must not be blocked at any
time, or your unit will not perform as expected.

Initial Startup

All U-Line units are shipped with controls that are preset.
No initial adjustments are required.

IMPORTANTIMPORTANT

• U-Line recommends the unit be allowed to run
overnight prior to loading the unit with product.

• On ice maker equipped units, it is possible that
dirt or scale will dislodge in the water line.
Always throw away all ice cubes made during the
first two to three hours of operation.

123 54

Temperature Control

Checking Product Temperature

ULIN_0093_A

Figure 4

To check the actual product temperature, in refrigerator
section only, insert an accurate thermometer into a plastic
(non-breakable) bottle that is partially filled with water.
Tighten the bottle cap securely (Figure 4).

Place the bottle in the refrigerator area for 24 hours.
Refrain from opening the unit during the testing period.
After 24 hours, check the temperature of the water. If
required, adjust the temperature control in a small
increment (See ADJUSTING TEMPERATURE).

Factors which affect the internal temperatures of the
cabinet include:

ULIN_0058_A

Figure 3

To turn the unit on or off, touch and hold the POWER icon
(Figure 3, 1) on the display panel for approximately ten
seconds until the °F symbol flashes and release.

• A small LED above the icon will illuminate to confirm

the touch of any controller icon.

• The display (Figure 3, 3) will show the unit set-point

temperature (38°F) when the unit is on and will show
OFF when the unit is off.

• Turning the unit off will override any other control

function.

CO2175FF, 2175RF 7

• Temperature setting.

• Ambient temperature where installed.

• Number of times and length of time the door is
opened and closed.

• Installation in direct sunlight or near a heat source.

Interior Lighting

The LIGHT icon (Figure 3, 5) on the control panel is used
to control an additional lighting function. The blackout/
Sabbath mode (not Star K certified) will turn the interior
light and display (Figure 3, 3) off.

To access the blackout/Sabbath mode (not Star K
certified):

1. Touch and hold the LIGHT icon (Figure 3, 5) for ten
seconds and release (the °F symbol will flash briefly at
the end of the five second period).

2. The interior light and control display
go dark for 36 hours.

NOTE: Although the display will not be visible, the
temperature controls in the unit remain active, and the
interior temperature will be maintained.

3. To exit the
certified) before the 36-hour time period

1.

blackout/Sabbath mode (not Star K

(Figure 3, 3)

, repeat Step

will

Temperature Display

To display the interior temperature:

1. Touch and hold the WARMER icon (Figure 5, 2) for
approximately five seconds and release when the °F
symbol in the display (Figure 5, 3) begins to flash.

2. The display
refrigerator temperature.

3. After approximately 10 seconds, the set-point
temperature will return to the display.

Factors which affect the internal temperatures of the
cabinet include:

• Temperature setting.

• Ambient temperature where installed.

• Number of times and length of time the door is

opened and closed.

• Installation in direct sunlight or near a heat source.

(Figure 5, 3)

will indicate the actual

Adjusting Temperature

Electronic Control Panel

123 54

ULIN_0058_A

Figure 5

The electronic control with digital display (Figure 5) is
configured to show a single temperature continuously.
This set-point temperature is a base number used by the
controller to maintain the temperature zone in your unit.
The factory default set-point is 38°F. This set-point
temperature is used as a gauge if further temperature
adjustments are required.

Temperature Display Selection

U-Line products supplied for 110 VAC operation have
temperatures displayed in a default Fahrenheit (°F)
configuration (Figure 5, 3). Models supplied for 220 VAC
operation have temperatures displayed in a default
Celsius (°C) configuration.

The display can easily be adjusted for either type of
temperature display. Press and hold the LIGHT icon
(Figure 5, 5) and within five seconds press the COOLER
icon (Figure 5, 4) three times to change the display as
desired.

NOTE: Refrigerator section temperatures are adjustable.
Freezer temperatures are not adjustable.

IMPORTANTIMPORTANT

Adjust the set-point temperature in single
increments, and wait 24 hours for the temperature
to stabilize before rechecking.

123 54

ULIN_0058_A

Figure 6

To adjust the set-point temperature:

1. Press and release either the WARMER (Figure 6, 2) or
COOLER (Figure 6, 4) icon to put the controller in the
SET TEMPERATURE mode. The °F symbol (Figure 6, 3)
will begin to flash.

NOTE: If no further action is taken, this mode will self
cancel in five seconds, and the original set-point
temperature will be displayed.

2. While the °F symbol is flashing, press the WARMER or
COOLER icon as required to adjust the set-point
temperature.

3. The change will be set five seconds after adjusting the
temperature and the new set-point temperature will be
displayed.

8 CO2175FF, 2175RF