Ubiquiti PrismAP-5-30 User Manual
5 GHz, 30° Beamwidth
Sector Horn Antenna
Model: PrismAP-5-30
Introduction
Thank you for purchasing the Ubiquiti Networks® Prism®AP.
This Quick Start Guide is designed to guide you through
installation and also includes warrantyterms.
The PrismAP is compatible with the following models:
• IsoStation
• IsoStation IS-5AC
• PrismStation™ PS-5AC
Package Contents
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet
cable and earth grounding must be used as conditions of product warranty. TOUGHCable™ is
designed for outdoor installations. It is the customer’s responsibility to follow local country
regulations, including operation within legal frequency channels, output power, and Dynamic
Frequency Selection (DFS) requirements.
™
IS-M5
PrismAP-5-30 Quick Start Guide
5 GHz, 30° Beamwidth
Sector Horn Antenna
Model: PrismAP-5-30
Hardware Installation
These instructions show the IsoStation; however, they also
apply to the PrismStation.
1. To remove the default horn, rotate the horn
counterclockwise while depressing the Release Button.
Release
Button
2. As you insert the PrismAP, align the arrow on the PrismAP
with the Release Button.
Loading...