NanoBridge®, Ubiquiti Networks
pioneered the all-in-one design for an
airMAX® product functioning as a CPE
(Customer Premises Equipment). Now
Ubiquiti Networks launches the latest
generation of CPE, the PowerBeam®.
Improved Noise Immunity
The PowerBeam directs RF energy in a
tighter beamwidth. With the focus in
one direction, the PowerBeam blocks
or spatially lters out noise, so noise
immunity is improved. This feature
is especially important in an area
crowded with other RF signals of the
same or similar frequency.
Integrated Design
Ubiquiti’s InnerFeed® technology
integrates the radio into the feedhorn
of an antenna, so there is no need for
a cable. This improves performance
because it eliminates cable losses.
Providing high performance and
innovative mechanical design at a
low cost, the PowerBeam is extremely
versatile and cost-effective to deploy.
Application Examples
PtMP Client Links
The PowerBeam used as a CPE device for each client in an airMAX PtMP network.
Wireless Client
PtP Link
airMAX Technology Included
Unlike standard Wi-Fi protocol,
Ubiquiti’s Time Division Multiple
Access (TDMA) airMAX protocol
allows each client to send and receive
data using pre-designated time
slots scheduled by an intelligent AP
controller.
This time slot method eliminates
hidden node collisions and
maximizes airtime efciency. It
provides signicant performance
improvements in latency, throughput,
and scalability compared to all other
outdoor systems in its class.
Intelligent QoS Priority is given to
voice/video for seamless streaming.
Scalability High capacity and
scalability.
Long Distance Capable of
high-speed, carrier-class links.
The PowerBeam as a powerful
wirelessclient.
airMAX TDMA Technology
Timeline
Time Slots
Time Slot 1
Use a PowerBeam on each side of a
PtPlink.
Time Slot 2
Time Slot 3
Time Slot 4
Data
VOIP
Up to 100 airMAX stations can be connected to an airMAX Sector; four airMAX
stations are shown to illustrate the general concept.
2
VOIP
VOIP
Software
airOS® is an intuitive, versatile,
highly developed Ubiquiti rmware
technology. It is exceptionally
intuitive and was designed to require
no training to operate. Behind
the user interface is a powerful
Integrated on all Ubiquiti M
products, airView® provides
advanced spectrum analyzer
functionality: waterfall, waveform,
and real-time spectral views allow
operators to identify noise signatures
and plan their networks to minimize
noise interference.
• Waterfall Aggregate energy over
time for each frequency.
• Waveform Aggregate energy
collected.
• Real-time Energy is shown in real
time as a function of frequency.
• Recording Automate airView to
record and report results.
DATASHEET
airControl® is a powerful and
intuitive, web-based server network
management application, which
allows operators to centrally manage
entire networks of Ubiquiti devices.
• Network Map
• Monitor Device Status
• Mass Firmware Upgrade
• Web UI Access
• Manage Groups of Devices
• Task Scheduling
3
Hardware Overview
DATASHEET
Innovative Mechanical Design
• Built-in mechanical tilt The mounting bracket
conveniently offers 20° of uptilt and up to 20° of
downtilt.
• Quick assembly The number of fasteners was reduced
to simplify assembly. Tools are required only when the
technician mounts the PowerBeam on thepole.
• Easy removal The antenna feed can be detached with
thepush of a button.
Corrosion Resistance
• Fasteners GEOMET-coated for improved corrosion
resistance when compared with zinc-plated fasteners.
• Dish and brackets Made of galvanized steel that is
powder-coated for superior corrosion resistance.
The redesigned pole bracket for the 400 mm dish and
fender washers for the 300 mm dish prevent paint from
being removed from the metal brackets for improved
corrosion resistance.