Ubiquiti Networks launches the
latest generation of airMAX® CPE
(Customer Premises Equipment),
the PowerBeam® 5AC Gen 2, with
dedicated Wi-Fi management.
Improved Noise Immunity
The PowerBeam 5AC Gen 2 directs
RF energy in a tighter beamwidth.
With the focus in one direction, the
PowerBeam 5AC Gen 2 blocks or
spatially lters out noise, so noise
immunity is improved. This feature
is especially important in an area
crowded with other RF signals of the
same or similar frequency.
Integrated Design
Ubiquiti’s InnerFeed® technology
integrates the radio into the feedhorn
of an antenna, so there is no need for
a cable. This improves performance
because it eliminates cable losses.
Application Examples
PtMP Client Links
The PowerBeam 5AC Gen 2 used as a CPE device for each client in an
airMAX Point-to-MultiPoint (PtMP) network.
Featuring high performance
and innovative design, the
PowerBeam 5AC Gen 2 is versatile
and cost-effective to deploy.
Software
airOS® 8 is the revolutionary operating
system for Ubiquiti® airMAX ac
products.
Powerful Wireless Features
• Access Point PtMP airMAX
Mixed Mode
• airMAX ac Protocol Support
• Long-Range PtP Link Mode
• Selectable Channel Width
• PtP: 10/20/30/40/50/60/80 MHz
• PtMP: 10/20/30/40 MHz
• Automatic Channel Selection
• Transmit Power Control:
Automatic/Manual
• Automatic Distance Selection
(ACK Timing)
• Strongest WPA2 Security
PtP Link
Use a PowerBeam 5AC Gen 2 on each side of a Point-to-Point (PtP) link.
Usability Enhancements
• airMagic® Channel Selection Tool
• Redesigned User Interface
• Dynamic Conguration Changes
• Instant Input Validation
• HTML5 Technology
• Optimization for Mobile Devices
• Detailed Device Statistics
• Comprehensive Array of Diagnostic
Tools, including RF Diagnostics and
airView® Spectrum Analyzer
2
Page 3
Advanced RF Analytics
airMAX ac devices feature a
multi-radio architecture to power a
revolutionary RF analytics engine.
An independent processor on the
PCBA powers a second, dedicated
radio, which persistently analyzes
the full 5 GHz spectrum and every
received symbol to provide you with
the most advanced RF analytics in the
industry.
Real-Time Reporting
airOS 8 displays the following RF
information:
• Persistent RF Error Vector
Magnitude (EVM) constellation
diagrams
• Signal, Noise, and Interference (SNI)
diagrams
• Carrier to Interference-plus-Noise
Ratio (CINR) histograms
Spectral Analysis
airView allows you to identify noise
signatures and plan your networks to
minimize noise interference. airView
performs the following functions:
• Constantly monitors environmental
noise
• Collects energy data points in
real-time spectral views
• Helps optimize channel selection,
network design, and wireless
performance
In airView, there are three spectral
views, each of which represents
different data: waveform, waterfall,
and ambient noise level.
Multi-Radio Architecture
DATASHEET
Constellation Diagrams
SNI Diagram and CINR Histogram
Dedicated Spectral Analysis
airView provides powerful spectrum
analyzer functionality, eliminating the
need to rent or purchase additional
equipment for conducting site
surveys.
UNMS App
The PowerBeam 5AC Gen 2 integrates
a separate Wi-Fi radio for fast and easy
setup using your mobile device.
Accessing airOS via Wi-Fi
The UNMS™ app provides instant
accessibility to the airOS conguration
interface and can be downloaded
from the AppStore® (iOS) or Google
Play™ (Android). UNMS allows you to
set up, congure, and manage the
PowerBeam 5AC Gen 2 and offers
various conguration options once
you're connected or logged in.
UNMS Conguration Screen
3
Page 4
Technology
050100150200250300350400450 Mbps
Packet Prioritization
airMAX ac TDMA Technology
DATASHEET
Unlike standard Wi-Fi protocol,
Ubiquiti’s Time Division Multiple
Access (TDMA) airMAX protocol
allows each client to send and receive
data using pre-designated time
slots scheduled by an intelligent AP
controller.
This time slot method eliminates
hidden node collisions and maximizes
airtime efciency, so airMAX
technology provides performance
improvements in latency, noise
immunity, scalability, and throughput
compared to other outdoor systems in
its class.
Intelligent QoS Priority assigned to
voice/video for seamless streaming.
Scalability High capacity and
scalability.
Long Distance Capable of
high-speed, carrier-class links.
Superior Performance
The next-generation airMAXac
technology boosts the advantages of
our proprietary TDMA protocol.
Ubiquiti’s airMAX engine with custom
IC dramatically improves TDMA
latency and network scalability. The
custom silicon provides hardware
acceleration capabilities to the airMAX
scheduler, to support the high data
rates and dense modulation used in
airMAX ac technology.
Timeline
Time Slot 1
Time Slots
Time Slot 2
Time Slot 3
Time Slot 4
Data
VOIP
VOIP
VOIP
Up to 100 airMAX ac stations can be connected to an airMAX ac Sector;
fourairMAX ac stations are shown to illustrate the general concept.
airMAX Network Scalability
U-AME-G1-BR4A
NKC966.001B
1412
TAIWAN
Superior Throughput Performance
Throughput Breakthrough
airMAX ac supports high data rates,
which require dense modulation:
256QAM – a signicant increase from
64QAM, which is used in airMAX.
With their use of proprietary
airMAXac technology, airMAX ac
products supports up to 450+Mbps
real TCP/IP throughput – up to triple
the throughput of standard airMAX
products.
4
150+ Mbps
150+ Mbps
450+ Mbps
Page 5
Hardware Overview
The PowerBeam 5AC Gen 2 supports up to 450+ Mbps real
TCP/IP throughput and features improved surge protection.
• Easy removal The antenna feed can be detached with
thepush of a button.
PBE-5AC-Gen2
The dish reector design of the PBE-5AC-Gen2 makes it an
ideal CPE for deployments requiring maximum performance.
A protective radome is available as an optional accessory for
the PBE-5AC-Gen2.
ModelFrequencyPBE-5AC-Gen2 Dish Reector
PBE-RAD-4005 GHz
ü
400 mm
Industrial-Strength Construction
• Fasteners GEOMET-coated for improved corrosion
resistance when compared with zinc-plated fasteners.
• Dish and brackets Made of galvanized steel that is
powder-coated for superior corrosion resistance. The
hardware also prevents paint from being removed from the
metal brackets for improved corrosion resistance.
• Optional support In high-wind environments, you can
enhance support with additional hardware (not included).
DATASHEET
PBE-5AC-ISO-Gen2
The PBE-5AC-ISO-Gen2 offers a rear housing with a
metal-plated interior, designed to enhance RF shielding.
Additionally, an included protective radome shields the
PowerBeam 5AC ISO Gen 2 from nature's harshest elements.
Breakthrough RF Isolation
The integrated isolator design spatially lters out
interference, so the PBE-5AC-ISO-Gen2 delivers improved
noise immunity in co-location deployments.
Compare the two near-eld plots below, and note the
superior performance of the integrated RF isolator.
Both near-eld plots are displayed in watts and use a linear
scale. The strength of the electromagnetic eld is color-
coded:
• Red: Highest strength
• Green: Medium strength
• Indigo: Lowest strength
Without Integrated RF IsolatorWith Integrated RF Isolator
5
Page 6
DATASHEET
Specications
PBE-5AC-Gen2
Dimensions420 x 420 x 230 mm (16.54 x 16.54 x 9.06")
Weight2.22 kg (4.89 lbs)
Power Supply24V, 0.5A Gigabit PoE Adapter (Included)
Max. Power Consumption8.5W
Power MethodPassive PoE (Pairs 4, 5+; 7, 8 Return)
Supported Voltage Range20 to 26VDC
Gain25 dBi
Networking Interface(1) 10/100/1000 Ethernet Port
Processor SpecsMIPS 74Kc
Memory64 MB
LEDsPower, Ethernet, (4) Signal Strength
Channel SizesPtP ModePtMP Mode
10/20/30/40/50/60/80 MHz10/20/30/40 MHz
Enclosure Characteristics
MountingPole-Mounting Kit (Included)
Wind Loading 380 N @ 200 km/h (85.4 lbf @ 125 mph)
Wind Survivability200 km/h (125 mph)
ESD/EMP ProtectionAir: ± 24 kV, Contact: ± 24 kV
Operating Temperature-40 to 70° C (-40 to 158° F)
Operating Humidity5 to 95% Noncondensing
RoHS ComplianceYes
Salt Fog TestIEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5
Vibration TestIEC 68-2-6
Temperature Shock TestIEC 68-2-14
UV TestIEC 68-2-5 at 40° C (104° F), Equivalent: ETS 300 019-1-4
Wind-Driven Rain TestETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5