Ubiquiti NSM5D User Manual

Models:
NanoStation M2/M5
NanoStation loco M2/M5

Typical Deployment

LAN or Computer to

Ethernet Port labeled

LAN on PoE Adapter

Typical Deployment

Connect the Power Cord to the

PoE Adapter and a power outlet

Ethernet Port on Ubiquiti

Device to Ethernet Port labeled

POE on PoE Adapter

Note: Shielded Category 5 (or above) cabling should be

used for all wired Ethernet connections and should be
grounded through the AC ground of the PoE.

1

Quick Reference Guide

Accessing AirOS

Connect to the airOS Configuration Interface.

1. Make sure that your host machine is connected to the LAN that
is connected to the NanoStation.

2. Configure the Ethernet adapter on your host system with a
static IP address on the 192.168.1.x subnet (e.g., 192.168.1.100).

3. Launch your Web browser. Type http://192.168.1.20 in the
address field and press enter (PC) or return (Mac).

4. The login screen will appear. Enter ubnt in the Username and
Password fields. Select your Country and Language. You must
agree to the Terms of Use to use the product. Click Login.

Note: U.S. product versions are locked to the U.S. Country

Code to ensure compliance with FCC regulations.

The AirOS Interface will appear allowing you to customize your
settings as needed.

2

Ubiquiti Networks Wiki and Forum

Ubiquiti Networks Wiki and Forum

Ubiquiti Networks has an online Wiki with Manuals, Guides, and
Information. It is located at www.ubnt.com/wiki.

Another great resource is the Ubiquiti Networks Forum. You can
post and view comments, questions, and answers with other
forum members and Ubiquiti staff at www.ubnt.com/forum.

3