Ubiquiti NSM5 Product Data Sheet
Datasheet
Datasheet
Indoor/Outdoor airMAX™ CPE
Models: NSM2, NSM3, NSM365, NSM5, locoM2, locoM5, locoM9
Cost-Effective, High-Performance
Compact and Versatile Design
Powerful Integrated Antenna
Overview
Leading-Edge Industrial
Design
PtMP Client Links
Datasheet
Ubiquiti Networks™ set the bar for
the world's rst low-cost and efcient
broadband Customer Premises
Equipment (CPE) with the original
NanoStation
and NanoStationlocoM take the same
concept to the future with sleek and
elegant form factors, along with
integrated airMAX
protocol) technology.
The low cost, high performance, and
small form factor of NanoStationM
and NanoStationlocoM make them
extremely versatile and economical to
deploy.
™
. The NanoStationM
™
(MIMO TDMA
NanoStationM as powerful clients in an airMAX
PtMP (Point-to-Multi-Point) network setup.
Wireless Client
NanoStationM as a powerful
wireless client.
Use two NanoStationM to create a PtP link.
PtP Link
Utilize airMAX Technology
Unlike standard Wi-Fi protocol,
Ubiquiti’s Time Division Multiple
Access (TDMA) airMAX protocol
allows each client to send and receive
data using pre-designated time
slots scheduled by an intelligent AP
controller.
This “time slot” method eliminates
hidden node collisions and
maximizes airtime efciency. It
provides many magnitudes of
performance improvements in
latency, throughput, and scalability
compared to all other outdoor
systems in its class.
Intelligent QoS Priority is given to
voice/video for seamless streaming.
Scalability High capacity and
scalability.
Long Distance Capable of
high-speed, carrier-class links.
Latency Multiple features
dramatically reduce noise.
Dual Ethernet
Connectivity
The NanoStationM provides a
secondary Ethernet port with
software-enabled PoE output for
seamless IP video integration.
1
Intelligent PoE
Remote hardware reset circuitry of
the NanoStationM allows the device
to be remotely reset from the power
supply location.
The NanoStationM may also be
powered by the Ubiquiti Networks
TOUGHSwitch PoE. In addition, any
NanoStationM can easily become
48V, 802.3af compliant through
use of the Ubiquiti Instant 802.3af
Adapter (sold separately).
2
Remote Reset
1 Only NanoStationM models
2 Remote reset is an option that is sold separately as the POE-24. The NanoStationM includes a 24V PoE adapter without remote reset.
2
www.ubnt.com/airmax
Models
LAN1 LAN2
Model Frequency Gain
NSM2 2.4 GHz 11 dBi
NSM3 3 GHz 13 dBi
NSM365 3.65 GHz 13 dBi
NSM5 5 GHz 16 dBi
Datasheet
Model Frequency Gain
locoM2 2.4 GHz 8 dBi
locoM5 5 GHz 13 dBi
Model Frequency Gain
locoM9 900 MHz 8 dBi
www.ubnt.com/airmax
3
Datasheet
Software
airOS is an intuitive, versatile,
highly developed Ubiquiti rmware
technology. It is exceptionally
intuitive and was designed to require
no training to operate. Behind
the user interface is a powerful
rmware architecture, which
enables high-performance, outdoor
multi-point networking.
• Protocol Support
• Ubiquiti Channelization
• Spectral Width Adjustment
• ACK Auto-Timing
• AAP Technology
• Multi-Language Support
Integrated on all Ubiquiti M
products, airView provides advanced
spectrum analyzer functionality:
waterfall, waveform, and real-time
spectral views allow operators to
identify noise signatures and plan
their networks to minimize noise
interference.
• Waterfall Aggregate energy over
time for each frequency.
• Waveform Aggregate energy
collected.
• Real-time Energy is shown in real
time as a function of frequency.
• Recording Automize AirView to
record and report results.
airControl is a powerful and
intuitive, web-based server network
management application, which
allows operators to centrally manage
entire networks of Ubiquiti devices.
• Network Map
• Monitor Device Status
• Mass Firmware Upgrade
• Web UI Access
• Manage Groups of Devices
• Task Scheduling
4
www.ubnt.com/airmax
Loading...