Ubiquiti B5 Guide

B5 USER GUIDE

DataRate Power Tolerance DataRate Sensitivity Tolerance
6Mbps 24 dBm +/-1.5dB 6Mbps -94 dBm +/-1.5dB
9Mbps 24 dBm +/-1.5dB 9Mbps -93 dBm +/-1.5dB
12Mbps 24 dBm +/-1.5dB 12Mbps -91 dBm +/-1.5dB
18Mbps 24 dBm +/-1.5dB 18Mbps -90 dBm +/-1.5dB
24Mbps 26 dBm +/-1.5dB 24Mbps -86 dBm +/-1.5dB
36Mbps 22 dBm +/-1.5dB 36Mbps -83 dBm +/-1.5dB
48Mbps 21 dBm +/-1.5dB 48Mbps -77 dBm +/-1.5dB
54Mbps 19 dBm +/-1.5dB 54Mbps -74 dBm +/-1.5dB

802.11a OFDM

802.11a OFDM

RANGE PERFORMANCE

TX SPECIFICATIONS

RX SPECIFICATIONS

Outdoor (BaseStation Antenna Dependent):

Over 10km

Wireless Approvals

FCC Part 15.247, IC RS210, CE

RADIO OPERATING FREQUENCY 5.745-5.825GHz

SYSTEM INFORMATION

Processor Specs

Atheros AR2313 SOC, MIPS 4KC, 180MHz

Memory Information

16MB SDRAM, 4MB Flash

Networking Interface

10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface

RoHS Compliance

YES

REGULATORY / COMPLIANCE INFORMATION

SOFTWARE

12V, 1A (12 Watts).

Operating Temperature

-20C to +70C

Operating Humidity

5 to 95% Condensing

Shock and Vibration

Power Supply

PHYSICAL / ELECTRICAL / ENVIRONMENTAL

Enclosure Size

26.4 cm x 8 cm x 3cm

Weight

0.4kg

ETSI300-019-1.4

visit www.ubnt.com/airos

Enclosure Characteristics

Outdoor UV Stabalized Plastic

Mounting Kit

Pole Mounting Kit included

Power Method

Passive Power over Ethernet (pairs 4,5+; 7,8 return)

Max Power Consumption

5 Watts

COMPLIANCE INFORMATION

FCC

Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to pro-vide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.

!

The antennas used for this transmitter must be installed to provide a separation

operating in conjunction with any other antenna or transmitter.

!

INDUSTRY CANADA

This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à! la norme NMB-003 du
Canada.

!

Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.

!!

To reduce potential radio interference to other users, the antenna type and its
gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.)
is not more than that permitted for successful communication.!

distance of at least 193cm from all persons and must not be located or