airMAX Omni is a Carrier Class 2x2
Dual Polarity MIMO Omnidirectional
Antenna that was designed to
seamlessly integrate with RocketM
radios (RocketM sold separately).
Pair the RocketM’s radio with the
airMAX Omni’s reach to create a
powerful, 360° omnidirectional
basestation.. This seamless integration
gives network architects unparalleled
exibility and convenience.
On the right is one example of how
airMAX Omni can be deployed:
Internet
Backbone
Mobile Computer with
airGridM Client
Omni PtMP (Point to Multi-Point) Link Example
RocketDish with RocketM
(PtP Backhaul)
ISP
Network
RocketDish with
RocketM
(PtP Backhaul)
Corporate Campus with NanoBridgeM Clients
airMAX Omni with
RocketM (PtMP)
Utilize airMAX Technology*
Unlike standard Wi-Fi protocol,
Ubiquiti’s Time Division Multiple
Access (TDMA) airMAX protocol
allows each client to send and receive
data using pre-designated time
slots scheduled by an intelligent AP
controller.
This “time slot” method eliminates
hidden node collisions and maximizes
airtime efciency. It provides
many magnitudes of performance
improvements in latency, throughput,
and scalability compared to all other
outdoor systems in its class.
Intelligent QoS Priority is given to
voice/video for seamless streaming.
Scalability High capacity and
scalability.
Long Distance Capable of
high-speed, carrier-class links.
Latency Multiple features
dramatically reduce noise.
airMAX Omni antennas provide wide 360° coverage and utilize airMAX
technology to produce carrier-class performance and power.
Up to 100 airMAX clients can be connected to an airMAX Omni;
four airMAX clients are shown to illustrate the general concept.
airMAX Omni
* When Omni is paired with RocketM
2
www.ubnt.com/airmax#airMaxAntennas
Page 3
Models
Datasheet
AMO-5G10
(5 GHz, 10 dBi)
AMO-5G13
(5 GHz, 13 dBi)
AMO-3G12
(3 GHz, 12 dBi)
AMO-2G10
(2.4 GHz, 10 dBi)
AMO-2G13
(2.4 GHz, 13 dBi)
www.ubnt.com/airmax#airMaxAntennas
3
Page 4
Datasheet
Software
airOS is an intuitive, versatile,
highly developed Ubiquiti rmware
technology. It is exceptionally
intuitive and was designed to require
no training to operate. Behind the
user interface is a powerful rmware
architecture, which enables highperformance, outdoor multipoint
networking.
• Protocol Support
• Ubiquiti Channelization
• Spectral Width Adjustment
• ACK Auto-Timing
• AAP Technology
• Multi-Language Support
Integrated on all Ubiquiti M
products, airView provides Advanced
Spectrum Analyzer Functionality:
Waterfall, waveform, and real-time
spectral views allow operators to
identify noise signatures and plan
their networks to minimize noise
interference.
• Waterfall Aggregate energy over
time for each frequency.
• Waveform Aggregate energy
collected.
• Real-time Energy is shown real-
time as a function of frequency.
• Recording Automize AirView to
record and report results.
airControl is a powerful and
intuitive, web-based server network
management application, which
allows operators to centrally manage
entire networks of Ubiquiti devices.
• Network Map
• Monitor Device Status
• Mass Firmware Upgrade
• Web UI Access
• Manage Groups of Devices
• Task Scheduling
4
www.ubnt.com/airmax#airMaxAntennas
Page 5
Specications
Antenna Characteristics
ModelAMO-2G10AMO-2G13AMO-3G12AMO-5G10AMO-5G13
Dimensions* (mm)1030 X 122 X 841390 X 122 X 1051012 X 122 X 105582 X 90 X 65799 X 90 X 65
MountingUniversal Pole Mount, RocketM Bracket, and Weatherproof RF Jumpers Included
* Dimensions and weight include pole mount and exclude RocketM (RocketM sold separately)
AMO-2G10 Antenna Information
Return LossVertical AzimuthVertical Elevation
Datasheet
Horizontal AzimuthHorizontal Elevation
www.ubnt.com/airmax#airMaxAntennas
5
Page 6
Datasheet
AMO-2G13 Antenna Information
Return LossVertical AzimuthVertical Elevation
Horizontal AzimuthHorizontal Elevation
AMO-3G12 Antenna Information
Return LossVertical AzimuthVertical Elevation
Horizontal AzimuthHorizontal Elevation
6
www.ubnt.com/airmax#airMaxAntennas
Page 7
AMO-5G10 Antenna Information
Return LossVertical AzimuthVertical Elevation
Datasheet
Horizontal AzimuthHorizontal Elevation
AMO-5G13 Antenna Information
Return LossVertical AzimuthVertical Elevation
Horizontal AzimuthHorizontal Elevation
www.ubnt.com/airmax#airMaxAntennas
7
Page 8
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and
earth grounding must be used as conditions of product warranty. TOUGHCable is designed for outdoor
installations. It is the installer’s responsibility to follow local country regulations, including operation within
legal frequency channels, output power, indoor cabling requirements, and Dynamic Frequency Selection
(DFS) requirements.
For further information, please visit www.ubnt.com.
All speci cations in this document are subject to change without notice.
Protect your networks from the most
brutal environments with Ubiquiti
Networks’ industrial-grade, shielded
Ethernet cable, TOUGHCable.
Increase Performance
Dramatically improve your
Ethernet link states, speeds, and
overall performance with Ubiquiti
TOUGHCables.
Extreme Weatherproof
Designed for outdoor use,
TOUGHCables have been built to
perform even in the harshest weather
and environments.
ESD Damage Protection
Protect your networks from
devastating electrostatic discharge
(ESD) attacks.
Extended Cable Support
TOUGHCables have been developed
to increase power handling
performance for extended cable run
lengths.
Bulletproof your networks
TOUGHCable is currently available in
two versions: PRO Shielding Protection
and CARRIER Shielding Protection.
TOUGHCable PRO
outdoor, carrier-class shielded cable
with an integrated ESD drain wire.
TOUGHCable CARRIER
Category5e, outdoor, carrier-class
shielded cable that features
an integrated ESD drain wire,
anti-crosstalk divider, and secondary
shielding. It is rated to provide optimal
performance on Gigabit Ethernet
networks.
Additional Information:
Ubiquiti TOUGHCable and TOUGHCable
Datasheet
is a Category 5e,
TOUGHCable Connectors
Speci cally designed for use with Ubiquiti TOUGHCables and available in
100-pc. bags, TOUGHCable Connectors protect against ESD attacks and Ethernet
hardware damage, while allowing rapid eld deployment without soldering.
ESD attacks are the leading cause for
device failures. The diagram below
illustrates the areas vulnerable to
ESD attacks in a network.
By using a grounded Ubiquiti Power
over Ethernet (PoE) Adapter along with
Connectors, you can effectively protect
against ESD attacks.
is a
Unshielded
cable with
no ESD drain
• 24 AWG copper conductor pairs
• 26 AWG integrated ESD drain wire
to prevent ESD attacks and damage
PoE adapter with
no earth ground
• PE outdoor-rated, weatherproof
jacket
• Multi-layered shielding
• Available in lengths of 1000 ft
(304.8m)
8
Ubiquiti
TOUGHCable
Ubiquiti
PoE Adapter
RR101112
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.