Ubiquiti ACBLOCO User Manual

airMAX® Home Wi-Fi
Access Point

Model: ACB-LOCO

Introduction

Thank you for purchasing the airMAX® airCube™ loco.
This Quick Start Guide is designed to guide you through
installation and also includes warranty terms.

Package Contents

airMAX® Home Wi-Fi
Access Point

Model: ACB-LOCO

airCube loco Quick Start Guide

Hardware Overview

LAN Port

The 10/100 Ethernet RJ45 port connects to a local
network device.

The 10/100 Ethernet RJ45 port connects to an
airMAX CPE radio.

The Power Port can be used to power the airCube.
The power adapter (not included) must be 5V with

a MicroUSB connector.

The LED lights up blue when the airCube is
powered on.

WAN Port
LED
Power Port

Hardware Installation

1. Connect one end of an Ethernet cable to the WAN Port
on the back of the airCube. Connect the other end of the
Ethernet cable to your airMAX CPE.

2. Connect a 5V Micro USB adapter (not included) to
the Power Port and the other end of the adapter to a

poweroutlet.

UNMS App

Use the UNMS™ (Ubiquiti® Network Management System)

app to install and configure the airCube.

1. Download and install the UNMS app from the AppStore
(iOS) or Google Play™ (Android).

Note: Ensure that Wi-Fi is enabled on your

mobile phone or tablet.

2. Launch the UNMS app and proceed to the section that

corresponds with your mobile device: Android Users or
iOS Users.

Android Users

1. Tap the icon to add a new device to UNMS.

2. Select Discover to scan for devices on the active Wi-Fi
networks in range.

3. Tap the airCube device. UNMS will activate a QR scanner
using the camera function on your mobile device.

4. Scan the QR code located on the bottom of the airCube.

After the QR code has been scanned, UNMS will connect

your mobile device to the airCube and initiate the login
procedure.

5. The Status screen appears. Verify connectivity to the
airCube.

6. Tap the icon to display multiple options in the sidebar.