The Puritain Bennett GoodKnight® 420G device (GK420G) is intended for treating
patients with Sleep Disordered Breathing including Obstructive Sleep Apnea Syndrome
(OSAS). The main characteristic of this pathology is the occurrence of multiple
respiratory events caused by contraction of the upper airways that disturb sleep. The
GoodKnight 420G delivers a Continuous Positive Airway Pressure (CPAP) that
prevents the upper airways from becoming obstructed thus eliminating apneas.
It is essential for you to understand the limitations on the use of this device. Therefore,
please read this manual carefully before using the GoodKnight 420G.
The information contained here is intended to help you use this device under optimum
conditions of safety and operation. For any question relating to the equipment and its
use, contact your Health Care Provider or your home Medical Equipment Provider.
Your doctor has decided on the treatment of your illness. He or she has prescribed the
various parameters that the hospital or your home care provider will program. You
must not make any adjustment, except under direct supervision of your Home Care
Provider.
CAUTION
Federal (U.S.A.) law restricts this device to sale by or on the order of a physician.
GoodKnight® is a registered trademark of Nellcor Puritan Bennett Inc.
GoodKnight 420G - Patient Manual iii
This page is left blank intentionally
iv GoodKnight 420G - Patient Manual
Revision A
TABLE OF CONTENTS
BEFORE STARTING............................................................................................................................................................1
INDICATIONS FOR USE .......................................................................................................................................................2
PRECAUTIONS FOR USE......................................................................................................................................................2
CHECKING THE COMPONENTS............................................................................................................................................3
DESCRIPTION OF THE DEVICE...................................................................................................................................... 4
STANDARD INSTALLATION ................................................................................................................................................7
FITTING AN OXYGEN ADAPTOR.......................................................................................................................................... 8
INSTALLING A HUMIDIFIER ................................................................................................................................................ 9
INSTALLING AN EXTERNAL BATTERY ..............................................................................................................................10
USE ........................................................................................................................................................................................11
USING THE RAMP............................................................................................................................................................. 12
ACCESSING INFORMATION ON THE DEVICE......................................................................................................................14
SETTING THE TIME...........................................................................................................................................................15
MAINTENANCE AND CLEANING INSTRUCTIONS .................................................................................................. 17
AIR INLET FILTERS ..........................................................................................................................................................17
TRANSPORT AND STORAGE CONDITIONS ......................................................................................................................... 21
CONDITIONS OF USE ........................................................................................................................................................21
DISPOSAL OF THE GOODKNIGHT 420G AT THE END OF ITS LIFE .................................................................................. 21
ELECTRICAL CHARACTERISTICS OF THE POWER SUPPLY MODULE.................................................................................... 22
ELECTRICAL CHARACTERISTICS OF THE DEVICE .............................................................................................................. 22
In order to ensure that you use your GoodKnight 420G device safely and efficiently, please read all
the information contained in this operating manual. Please pay special attention to the passages
preceded by the following terms:
WARNING
CAUTION
NOTE
Means that there is a danger of death or accident to you or others.
Means that there is a possibility of material damage to this or another device.
Indicates special points aimed at more efficient and practical operation.
WARNINGS
1. Before any use, please check your GoodKnight 420G, as specified in the chapter “Checking the
components”. (See page 3).
2. In the event of additional oxygen supply, carefully observe the safety instructions for using
oxygen given in the chapter “Fitting an oxygen adaptor”. (See page 8).
3. Only use the accessories that have been given to you by your service provider. Check that you
have the instructions for using each of the accessories and read through them.
4. Use only the specific power supply module provided with the device.
5. Do not use the device in the presence of flammable fumes.
6. Follow the device’s installation instructions as specified in this manual in the chapter
“Installation”. (See page 5). In particular, keep the machine away from any sources of water.
7. Do not accidentally or intentionally obstruct the air outlet or any other opening in the device or the
respiratory circuit.
8. Do not introduce liquids or objects into the air outlet.
9. You may contact the medical team if, when using the GoodKnight 420G, the following symptoms
appear: dryness in your airways or nose, skin sensitivity, runny nose, earache, sinus trouble,
daytime drowsiness, mood changes, disorientation, irritability or memory loss.
10. Contact your home care provider in the event of any malfunction, whatever it may be. Maintaining
this equipment is solely the responsibility of the competent personnel. Do not attempt to open the
device.
11. The air flow for breathing produced by this device can be as much as 7°F higher than the
temperature of the room. Caution should be exercised if the room temperature is warmer than
90°F.
GoodKnight 420G - Patient Manual 1
Revision A
Indications for use
The GoodKnight 420G device is indicated for use in the treatment of obstructive respiratory sleep
disorders, particularly Obstructive Sleep Apnea (OSA) in spontaneously breathing patients weighing
over 30 kg (66 lb) within a homecare environment.
Precautions for use
The GoodKnight 420G device must be used with caution with patients in the following conditions. If
you are affected by one of these, contact your doctor at the start of your treatment.
• Pneumothorax or pneumomediastinum
• Severe bullous emphysema or previously complicated by pneumothorax
• Massive epistaxis or previous massive epistaxis
• Decompensated cardiac insufficiency or hypotension, especially in case of depletion in blood
volume or in case of cardiac rhythm disorder
• Pneumoencephalus, traumatism or recent surgery with the after-effect of a cranio-nasopharyngeal
fistula
• Acute sinusitis, otitis media or perforation of the tympanic membrane
• Severe claustrophobia.
2 GoodKnight 420G - Patient Manual
Revision A
Checking the components
In order to be able to use the GoodKnight 420G with its specific electrical power supply, you must
have at least the following items:
• A patient tubing.
• A nasal mask (often called an “ interface ”) with all its fastening accessories as specified in the
instructions for using this mask.
In addition to these accessories, your doctor could have prescribed the use of a humidifier. In this
case, check that you have all the accessories for this humidifier specified in its operating instructions.
In the case of an additional oxygen supply, you must also have an adaptor (only in the case where the
oxygen supply is not fitted directly onto the mask). See the chapter “Fitting an oxygen adaptor”. (See
page 8).
Carefully check the device and each accessory. Check especially that the hoses are not damaged and
that the mask does not have any cracks or distortion in the mask housing or seal (part of the mask
coming in contact with the face).
Carefully check the device and the specific power supply module and verify that there is no obvious
fault. Plug the device to the mains using its power supply module, referring to steps 4 and 5 of the
chapter “Standard installation”. (See page 7).
The type of the device is displayed for a few seconds then the following standby screen showing the
hour (the value displayed is given as example):
9:31
(the two points are blinking).
Figure 1 – View of the display when the device is in standby mode
If the device was disconnected while the motor was running, the screen displays the pressure. The
device shows the same adjustments as at the time of the power supply cord disconnection and is set
on the pressure used at the time of disconnection.
Start the device by pressing the ON/OFF button. (See reference 4 in Figure 2, page 5). The blower
should start up and the noise should be regular.
Stop the device by pressing the ON/OFF button and unplug the power supply lead from the mains.
Standby Indicator
WARNING
In the event of problems or if you discover any anomaly, do not start the treatment and contact
your home service provider.
GoodKnight 420G - Patient manual 3
Loading...
+ 21 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.