Tyco 1213890 Series, 1213890-2, 1213890-1, 1213890-3, 1213890-4 Customer's Manual
SDE Closed Head
Battery Powered Crimp
Tool Kit 1213890-[ ]
Customer Manual
409-10065
13 APR 06 Rev B
SAFETY PRECAUTIONS
READ THIS FIRST !
1. INTRODUCTION
2. RECEIVING/INSPECTION
3. INSTALLATION/REMOVAL OF SDE CRIMP DIES
3.1. Installation of SDE Crimp Dies 5.......................................
3.2. Removal of Shouldered and PinnedDies 7...............................
4. OPERATION
5. PREVENTIVE MAINTENANCE
5.1. Daily Maintenance 8...............................................
5.2. Y early Maintenance 8..............................................
6. TROUBLESHOOTING
7. RETURN
2...........................
5....................................................
5.............................................
5............................
7.......................................................
8.........................................
8................................................
8..........................................................
8. REVISION SUMMARY
----
Safeguards are designed into this application equipment to protect operators
and maintenance personnel from most hazards during equipment operation.
However, certain safety precautions must be taken by the operator and repair
personnel to avoid personal injury, as well as damage to the equipment. For best
results, application equipment must be operated in a dry, dust–free environment.
Do not operate equipment in a gaseous or hazardous environment.
Carefully observe the following safety precautions before and during operation of
the equipment:
D
ALWAYS wear appropriate ear protection.
D
ALWAYS wear appropriate eye protection.
D
ALWAYS wear approved eye protection when operating powered equipment.
D
ALWAYS keep guard(s) in place during normal operation.
D
NEVER wear loose clothing or jewelry that may catch in moving parts of the
application equipment.
D
NEVER insert hands into installed application equipment.
D
NEVER alter, modify, or misuse the application equipment.
8................................................
E
2006 TycoElectronicsCorporation,Harrisburg,PA
All International Rights Reserved
Tyco is a trademark. *Trademark
Other products, logos, and company names used are the property of their respective owners.
This controlled document is subject to change. TOOLING ASSISTANCE CENTER 1-800-722-1111
PRODUCT INFORMATION1-800-522-6752
For latest revision or Regional Customer Service, visit
our website at
www.tycoelectronics.com
1
of 8
LOC B
SDE Closed Head Battery Powered Crimp Tool Kit 1213890-[ ]
SAFETY PRECAUTIONS -- IMPORTANT SAFETY INFORMATION
409-10065
DANGER
DANGER
DANGER
CAUTION
CAUTION
DANGER
DANGER
DANGER
CAUTION
CAUTION
of 8
Rev
B2
SDE Closed Head Battery Powered Crimp Tool Kit 1213890-[ ]
409-10065
TOOLING ASSISTANCE CENTER
CALL TOLL FREE 1-800-722-1111 (CONTINENTAL UNITED STATES AND PUERTO RICO ONLY)
The Tooling Assistance Center offers a means of providing technical assistance when required.
In addition, Field Service Engineers are available to provide assistance in the adjustment or repair of the
application equipment when problems arise which your maintenance personnel are unable to correct.
INFORMATIONREQUIRED WHEN CONTACTING THE TOOLING ASSISTANCE CENTER
When calling the Tooling Assistance Center regarding service to equipment, it is suggested that a person
familiar with the device be present with a copy of the manual (and drawings) to receive instructions. Many
difficulties can be avoided in this manner.
When calling the Tooling Assistance Center, be ready with the following information:
1. Customer name
2. Customer address
3. Person to contact (name, title, telephone number, and extension)
4. Person calling
5. Equipment number (and serial number if applicable)
6. Product part number (and serial number if applicable)
7. Urgency of request
8. Nature of problem
9. Description of inoperative component(s)
10. Additional information/comments that may be helpful
Rev
B 3
of 8
Loading...