TVLogic LUM-560W4K User Manual
Multi Format
Operation Manual_v1.2
L
UM-560W
4K LCD Monitors
multi
Contents
CAUTION 4
This equipment has been tested and found to comply with the limits for class A digital device, pursuant to part 15 of the
This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with
This symbol on the product or on its packing indicates that this product shall not be treated as household waste. Instead
Caution
AWA
Y UT VTAA
All operating instructions must be read and understood before the product is operated.
These safety and operating instructions must be kept in safe place for future reference.
All warnings on the product and in the instructions must be observed closely.
All operating instructions must be followed.
Do not use attachments not recommended by the manufacturer. Use of inadequate attachments
can result in accidents.
If you are not sure of the type of power supply used in your home, consult your dealer or local
power company. For units designed to operate on batteries or another power source, refer to the
operating instructions.
The power cords must be routed properly to prevent people from stepping on them or objects from
resting on them. Check the cords at the plugs and product.
product and inserting an object can cause electric shock and/or short internal parts.
For the same reason, do not spill water or liquid on the product.
Do not attempt to service the product yourself. Removing covers can expose you to high voltage
If any of the following conditions occurs, unplug the power cord from the AC outlet and request a
a. When the power cord or plug in damaged.
b. When a liquid was spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as described in the operating instructions.
Do not touch the controls other than those described in the operating instructions.
Improper adjustment of controls not described in the instructions can cause damage,
e. When the product has been dropped or damaged.
f. When the product displays an abnormal condition. Any noticeable abnormality
in the product indicates that the product needs servicing.
Caution
The vents and other openings in the cabinet are designed for ventilation. Do not cover or block
The LCD panel used in this product is made of glass. Therefore, it can break when the product is
Features
LUM MONITOR CONTAIN THE FOLLOWING FEATURES AND ADVANTAGES :
06
Compatible with varied SDI signals
- The product is compatible with varied SDI signals - 480i, 576i, 1080i, 1080p, 1080psf
Compatible with varied Digital signals
- The product is compatible with varied DVI, HDMI Digital signals –50p, 59.94p 60p and etc.
4K(HD-SDI ITU-R BT.1769 : 3840 X 2160@60Hz) Screen Support
- This product supports native 16:9 aspect ratio.
Cooling Fan Support
- Helps maintain optimal internal operating temperature.
Remote Control function
- This product can be remote controlled simply with a cable connection without any additional
peripheral equipment attached to the unit.
RS422 feature support
- This product supports protocols provided by TVLogic or a TSL protocol.
RS232 support
- Supports ethernet based program download & calibration.
Ethernet & USB support
- Supports ethernet and USB connection for program download.
DVI/HDMI(HDCP 1.1) input support
- 4 x DVI Digital and 4 x HDMI (HDCP) inputs are available without additional equipment.
SDI 3G support
- Supports 3G-SDI YCbCr/RGB 4:4:4 and YCbCr 4:2:2 formats.
Additional features
- Wide Viewing Angle, loop-through out(SDI), VESA Mounting, 1200:1 contrast ratio, 450cd and
user interface.
Controls, Indicators and Connections
AUDIO IN
AUDIO OUT
SDI A IN
SDI A OUT
DVI A IN
HDMI A IN
SDI B IN
SDI B OUT
DVI B IN
HDMI B IN
DVI
HDMI
SDI
F1/MODE
F2/SCAN
F3/ASPECT
POWER
ENTER
UP
DOWN
MENU
F5/BLUE ONLY
F4/MARKER
HDMI D IN
DVI D IN
SDI D OUT
SDI D IN
HDMI C IN
DVI C IN
SDI C OUT
SDI C IN
Controls, Indicators and Connections
- Used to select DVI input. By pressing the DVI button, depending on selected mode (UD, QUAD or
Single), previously selected DVI input selection displays.
- In Single Mode, press DVI button continuously to switch through DVI A~D.
- Used to select HDMI input. By pressing the HDMI button, depending on selected mode (UD,
QUAD or Single), previously selected HDMI input selection displays.
- In Single Mode, press HDMI button continuously to switch through HDMI A~D.
- Used to select SDI input. By pressing the SDI button, depending on selected mode (UD, QUAD or
Single), previously selected SDI input selection displays.
- In Single Mode, press SDI button continuously to switch through SDI A~D.
- Used to select the display conguration.
- Selects order of operation: UD MODE -> QUAD MODE -> SINGLE MODE
- Shortcut key for KEY MAPPING feature in the OSD MENU.
- Selectable options are as follows :
- Zooms in/out of the image without changing the aspect ratio. Also, displays the data at the
top of the horizontal blanking block.
- Used to change the display ratio between 4:3 and 16:9.
- Used to activate/deactivate the marker.
- The type of marker at work may be selected on the main menu.
- Used to activate MONO mode or remove red and green from the input signal and display the
screen only under a blue signal.
- Press the button again to activate the Focus Assist mode which will indicate the border lines
of display in the color that can be selected in the Waveform menu.
Controls, Indicators and Connections
- Used to check horizontal and vertical sync simultaneously by moving the screen
up/down/left/right.
- In this mode, the brightness of image automatically increase for easy verication of synchro-
nized signals.
- Captures still frame on-screen.
- Selects luminance range in SDI MODE between FULL (255) and NORMAL (235).
- Toggles 10bit Dithering On/O.
- This item toggles the 4:4:4 video processing lter On/O.
- Filter eliminates ringing artifacts in 4:2:2 sources, please set this lter On or O.
- This item forces psf mode for psf signals, overriding the automatic psf detection.
- If this feature is turned o, the unit checks for the psf signal rst, then searches for the
remaining modes.
- This item controls color temperature and allows instant access to preset color temperature
settings.
- Controls the display ratio of HD display. 16:9, 1.85:1, 2.35:1
- Used to activate the OSD menu.
- Used to move down within the menus during OSD menu activation and also to decrease the
value of the selected feature.
- May also be used to control the BRIGHT value during OSD menu inactivation. Use UP/DOWN keys
to adjust BRIGHT value.
- Used to move up within the menus during OSD menu activation and is also used to increase
the value of the selected feature.
- It may also be used to control the CONTRAST value during OSD menu inactivation. Use UP/DOWN
keys to adjust CONTRAST value.
Controls, Indicators and Connections
- Used to conrm a chosen value (or mode).
- May also be used to control the VOLUME value during OSD menu inactivation. Use UP/DOWN
keys to adjust VOLUME value.
- Indicates condition and power status of unit.
- Light turns o when the power is disconnected.
- Standby mode is indicated by a red LED light.
- Normal (active) mode is indicated by a Green LED light.
- Restores to previous state when monitor power turns o and comes back on.
- Used to turn power on and o.
Controls, Indicators and Connections
- Provides connection to control equipment for external monitor control.
- Features can be changed in the REMOTE(1/2) section of OSD menu.
- Used to control the monitor with protocol provided by TVLogic or to support TSL protocol.
- Used for ethernet based rmware updates and automatic alignment.
- Signal input terminal for DVI A,B,C,D signal.
- Signal input terminal for HDMI A,B,C,D signal.
- 3G/HD/SD SDI signal input terminal for SDI A,B,C,D signal.
- Select the left/right Audio Disembedder signal output or HDMI input signal or external stereo
signal is output through the phone jack
- Ethernet and USB port for easy rmware update.
- 100 ~ 240V AC 50/60Hz
Loading...