Page 1
123..
3,1,2..
C,A,B..
QT2
quick start presentation mode
Channel
Indicator
OK
Channel
The QT2 is an audience response device used when a
presenter wants to gather immediate feedback from
the audience.
THE TOOLBOX
Send Message - Send a message to the presenter. The presenter is
Battery
Indicator
Function
Keys
Up, Down,
Left, Right
Toolbox
Number
Pad
unable to respond via the same method.
NOTE: The presenter may have this feature disabled in the software.
If disabled, you will see “Not Open” when trying to send a message.
Your ID - Assigns an alphanumeric identication to device.
Settings - Press the function key below OK to open the settings and use
the arrow keys to scroll through the options. The settings contain:
• Device Info - Displays the Device ID.
• Contrast - Press the left/right arrows to adjust the contrast
of the objects. Press OK to save.
• Brightness - Press the left/right arrows to adjust the backlight
luminosity of the LCD display and the keypad on the QT2.
Press OK to save.
Symbols
CHANGING THE CHANNEL
Use the steps below to manually set the channel or
use the Find Channels function to nd a receiver
within range.
WARNING: If the lock symbol appears next to the
channel number, the channel cannot be changed.
1. Press the Channel button.
2. Use the number pad to enter the new channel
number.
3. Once the channel number has been entered,
press OK.
FIND CHANNELS
Use the steps below to nd a receiver within range.
1. Press the Channel button.
2. Press the middle function key below
The QT2 scans for receiver(s) within range.
3. Use the arrows to scroll through available
channels.
4. Press OK to select the channel.
RESPONDING
During the presentation, the QT2 prompts you to enter
the proper response type. An indicator appears in the
top left side of the screen for special question types.
Numeric Response question
Multiple Response question with
numeric answer values
Multiple Response question with alpha
answer values
Short Answer and Essay
question
When sending a response or when a response is
successfully received, an icon appears at the bottom
center of the screen. The following are graphic
representations of these icons:
The response is being sent.
The response was sent successfully.
EXAMPLE SCREENS
Single Response - Single Response
questions are multiple choice
questions, where only one answer
is selected. Once the selection has
been made, the response is sent to
the presenter.
Multiple Response - Multiple
Response questions have more
than one possible answer. Use the
number pad to enter your answer
choices and then press OK to
transmit your answer choices. Your
response may be alpha or numeric.
Numeric Response - Numeric
Response questions require a numeric
value to be entered. Use the number
pad to enter your answer and press
OK to submit your answer choice.
Essay and Short Answer - Essay and
Short Answer questions require a text
response. Once the text has been
entered, press OK to transmit your
answer.choice.
Invalid Response - If you see this
screen after sending a response,
it means that the response was
invalid. For example, answer
options are A - D, and you
submitted E as your answer choice.
Incorrect Channel - This screen
is to alert you that the QT2 is not
on the correct channel or that the
device is unable to communicate
with the receiver.
Polling Closed - This screen
indicates that polling is closed and
answers are not being accepted.
866.746.3015 TURNINGTECHNOLOGIES.COM
Page 2
QT2
quick start test mode
THE TOOLBOX
Go to Question - Select a specic question. Use the number pad to
enter a question number and press the function key below OK.
Skipped Question - View the next unanswered question.
Test Info - Displays the test name, version (if applicable) and
number of questions.
Settings - Press the function key below OK to open the settings and use
the right or left arrow keys to scroll through the options. The settings contain:
• Device Info - Displays the Device ID.
• Contrast - Press the left/right arrows to adjust the contrast of the
objects. Press OK to save.
• Brightness -
luminosity of the LCD display and the keypad on the QT2. Press OK to save.
Exit Test - Exits a test. Unanswered questions are displayed.
• Go Back Arrow - Return to Toolbox.
• Delete Test - Delete the test.
• Send Test - Send the test to the host computer.
Send Message - Send a message to the presenter. The presenter is unable
to respond via the same method.
Press the left/right arrows to adjust the backlight
CHANGING THE CHANNEL
Before logging into a test, the QT2 needs to be on the same channel
as the receiver.
1. Press the Channel button.
2. Use the number pad to enter the new channel number.
3. Once the channel number has been entered, press OK.
LOGGING INTO A TEST
1. Press a button on the QT2 to “wake up” the device.
2. The Welcome Screen is displayed followed by the Battery
Indicator Screen.
3. You may be prompted for Your ID.
a. Press the Backspace key to clear the information displayed.
b. Enter Your ID.
c. Press OK.
4. You may be prompted for Test Version.
a. Locate the Test Version number on the paper test.
b. Use the number pad to enter the Test Version.
c. Press OK.
5. The test name, version number (if applicable) and question count
are displayed.
6.
If the information displayed in the previous step is correct, press OK.
If the information is incorrect, press the back button (left function key).
Verify that the QT2 is on the correct channel and begin the process from
step 1.
You are now in Test Mode.
TAKING A TEST
Single Response - Press the function
key below your answer choice. Up to
ve answer choices will be visible on
the QT2. Press the up/down arrows
to view more choices. Answer choices
can be alpha or numeric.
Multiple Response - Use the
number pad to enter your answer
choices and then press OK once
you have made your selection.
Answer choices can be alpha or
numeric.yourselection.
Numeric Response - Enter the
response using the number pad,
press OK once you have made your
selection.
Short Answer/Essay - Use the
keyboard to enter the answer text
and press OK once you have made
your selection. The available number
of remaining characters is indicated
in the upper right of the screen.
True or False - Press the function
key below your answer.
NAVIGATING THROUGH
QUESTIONS
Scrolling Through Questions
1. Use the left and right arrows to scroll back
or forward through the question rolodex.
Go To a Specic Question
1. Press the Toolbox key.
2. Select the Go to Question icon and press Enter.
3. Use the number pad to enter the question
number.
4. Press the Enter button.
SENDING A TEST
Use the Toolbox to send your test. To send your test
follow the steps below:
NOTE: When answering the last question of the test,
you will receive a message that the test is complete or
incomplete. If you receive this message, skip to step 3.
1. Press the Toolbox key.
2. Use the arrow keys to highlight the Exit Test icon
and press Enter.
3. A message is displayed that the test is complete
or incomplete.
TIP: Press the function key below the Go Back
Arrow twice to return to the test to complete any
unanswered questions and review your answers.
4. Press the function key below Send Test to send
the test.
5. A message is displayed to conrm that you would
like to send the test.
6. Press the function key below OK.
The test is saved and sent to the host computer.
866.746.3015 TURNINGTECHNOLOGIES.COM
Loading...