Turbosound TA-880H Specification

TURBOSOUND Ltd

Star Road
Partridge Green
West Sussex
RH13 8RY
United Kingdom

t: [phone]
f: [phone]
e: [e-mail]

w: www.turbosound.com

Aspect

series

TA-880H trapezoidal three-way loudspeaker

The TA-880H is a trapezoidal three-way mid-high enclosure two custom HF drivers loaded by a high
frequency Polyhorn™ device, a custom 10” drive unit on a mid-range Polyhorn™ device, and two 10”
low-mid frequency drivers loaded with TurboMid™ devices.

The entire mid-high section is square and symmetrically shaped and can be removed from the
cabinet and rotated through 90°. The TA-880H cabinet is trapezoidally shaped with side angles
optimised at 12.5° to ensure that adjacent boxes are currently positioned relative to each other
with the optimum horizontal array angle. A recessed panel on the rear panel carries two linked
Speakon NL8s, and a kelping strap attachment point and M10 rigging point are provided for
adjusting the vertical angle. The cabinet is equipped with four recessed handles, and a
removable wheel board clips on to the front of the cabinet for transportation.

Features

• Ultra low distortion

• HF Polyhorn™ device

• HMF Polyhorn™ device

• Very high output

• Trapezoidal enclosure

• Seamless arrayability

• Removable rigging system

• Detachable wheelboard

• Speakon NL8

Applications

• Ground stacking

• Theatre and Corporate

• Dance clubs

Frequency Response

Frequency (Hz)

TA-880H Sound Pressure Level (dB)

100 1 kHz 10 2050 200 500 2 5

20 Hz

60

70

80

90

100

110

120

Limited Warranty

Every Turbosound loudspeaker product is warranted to the original end-user purchaser and all subsequent owners for a period of two (2) years for loudspeaker products, or one (1) year for
electronics products, from the original date of purchase. Warranty coverage includes defects in materials and workmanship. It does not include:

• damage caused by accident, misuse, abuse, neglect or modification by any other person other than an authorised Turbosound representative,

• damage caused by overdriving, use with unsuitable amplifiers or amplifier failure,

• damage caused by failure to operate the product in accordance with the instructions contained in the user’s manual,

• damage occurring during shipment in transit,

• claims based upon any misrepresentations by the seller,

• products which do not have the original components as specified in the product engineering information,

• products on which the serial number has been removed or defaced.
Should any fault develop with a component of your Turbosound system, please return the product, freight pre-paid, in its original packing carton, along with proof of purchase such as the
original bill of sale, and a description of the suspected fault, to your local authorised Turbosound representative. The product serial number must be quoted in all correspondence relating to the
claim. Insurance is recommended as Turbosound or its representatives are not liable for loss or damage in transit.

TA-880H trapezoidal three-way loudspeaker

1025mm x 477mm x 463mm (40.3” x 18.8” x 18.3”)

61kg (134.2 lbs)

2 x custom 10” (254mm) LMF drivers, 1 x custom 10” (254mm) HMF driver on a midrange Polyhorn™,
2 x custom HF drivers on a high frequency Polyhorn™

95Hz - 20kHz ±4dB

25°H x 15°V

LMF: 500 watts r.m.s., 1000 watts program
HMF: 200 watts r.m.s., 400 watts program
HF: 100 watts r.m.s., 200 watts program

LMF: 108dB; HMF: 114dB; HF: 111dB

140dB continuous, 146dB peak

LMF: 101Hz–405Hz, HMF: 405Hz–4kHz, HF: 5k99Hz–20kHz

LMF: 8 ohms HMF: 16 ohms HF: 12 ohms

15mm (5/8”) birch plywood throughout; rebated, screwed and glued. Finished in black semi-matt
textured paint. Four recessed carrying handles

Cloth/expanded metal

(2) Speakon NL8 wired: pin1+: linked internally; pin1-: linked internally; pin 2+: LMF positive, pin 2-: LMF
negative, pin 3+: HMF positive, pin 3- HMF negative, pin 4+: HF positive and pin 4-: HF negative

MG-880 Replacement cloth/expanded metal grille
LS-1022 10” (254mm) LMF loudspeaker
RC-1022 Recone kit for LS-1022
LS-1021 10” (254mm) HMF loudspeaker
RC-1021 Recone kit for LS-1021
CD-112 HF compression driver
RD-112 Replacement diaphragm for CD-112
W-3 Heavy duty wheel

More information can be found on our website: www.turbosound.com

DIMENSIONS (HxWxD)

NET WEIGHT

COMPONENTS

FREQUENCY RESPONSE

NOMINAL DISPERSION

POWER HANDLING

SENSITIVITY

MAXIMUM SPL

CROSSOVER BANDS

IMPEDANCE

CONSTRUCTION

GRILLE

CONNECTORS

SPARES AND ACCESSORIES

MORE INFO

TA-880H datasheet v1.3 11/2010

477mm [18.8"]

1025mm [40.4"]

463mm [18.3"]