2 Way 10" Full Range Loudspeaker
for Portable PA and
Installation Applications
2 way full range loudspeaker
#
for portable PA and
installation applications
300 Watts continuous,
#
1,200 Watts peak power
Ideal for FOH, side ll and
#
monitor applications
10" low frequency driver with
#
low mass voice coil for improved
transient response
Aluminium dome 1" neodymium
#
motor compression driver
Switchable passive/bi-amp operation
#
for exibility of use
Rotatable converging
#
elliptical waveguide provides
100° H x 60° V dispersion
12 m m (½ ") birch plywood enclosure
#
with hard wearing semi matt black
paint nish
Rugged powder coated perforated
#
steel mesh grille
Integral 35 mm pole
#
mount and handles
Multiple internal rigging points allow
#
bracket mount and suspension in
any orientation
Neutrik speakON* NL4 connectors
#
for reliable long life operation
3-Year Warranty Program*
#
Designed and engineered
#
in England
*All third-pa rty tradema rks are the prop erty of their re spective
owners. T heir use neither c onstitutes a claim o f the trademark no r
a liation of the tr ademark owner s with MUSIC Group. Pro duct names
are mention ed solely as a ref erence for compati bility, e ects and/or
componen ts. Warranty de tails can be foun d at music-group.co m.
The 2 way full range NuQ102 is a
switchable passive/bi-amp 1,200 Watt
10" loudspeaker system ideally suited
for a wide range of speech and music
sound reinforcement applications.
Engineered to work in conjunction
with TURBOSOUND loudspeaker
management systems, the NuQ102
provides optimal performance
for FOH, side ll and delay line
loudspeakers, and is an exceptional
choice for wedge monitoring applications.
The NuQ102 loudspeaker features a 10" low frequency driver with a low
mass voice coil for improved transient response, and an aluminium dome
1" neodymium high frequency compression driver mounted on a rotatable
100° horizontal by 60° vertical dispersion converging elliptical waveguide.
All drivers are matched with an internal passive crossover network in a
re ex-loaded enclosure, and bi-amp mode can be enabled by means of a
NL4 connectors for input and link connections to additional enclosures.
Finished in a highly durable semi matt black paint, the cabinet is
constructed from 12 mm (½ ") birch plywood – and includes a rugged
powder coated perforated steel mesh grille backed with reticulated
foam. Multiple threaded rigging points are provided for suspension in
any orientation, or for mounting with industry standard wall brackets.
Optional ying yoke, swivel brackets, and swivel extenders allow for further
exibility in install applications (each available separately). The NuQ102
also features a 35 mm socket for standard pole mounting – plus integrated
handles for convenient transport.
Page 2
2 o
f 1
3
Product Information Document
Portable Speakers
NuQ 10 2
2 Way 10" Full Range Loudspeaker
for Portable PA and
Installation Applications
You Are Covered
We always strive to provide the best possible Customer Experience. Our products are made in our
own MUSIC Group factory using state-of-the-art automation, enhanced production work ows and
quality assurance labs with the most sophisticated test equipment available in the world. As a result,
we have one of the lowest product failure rates in the industry, and we con dently back it up with a
generous 3-Year Warranty program.
2 of 13
Page 3
3 o
f 1
3
k
Product Information Document
Portable Speakers
NuQ 10 2
2 Way 10" Full Range Loudspeaker
for Portable PA and
Installation Applications
Frequency Response Sensitivity 1 W / 1 m
Impedance
110
104
98
92
86
80
Sound Pressure Level (dB)
74
68
62
300
Full Range
20
Full Range
1001k10k20
Frequency (Hz)
100
10
Magnetude (Ohms)
1
201001k10k20k
Frequency (Hz)
3 of 13
Page 4
4 o
f 1
3
Product Information Document
Portable Speakers
NuQ 10 2
2 Way 10" Full Range Loudspeaker
for Portable PA and
Installation Applications
Horizontal Beamwidth
300
100
Beamwidth (deg)
10
201001k10k20k
Vertical Beamwidth
300
-3 dB
-6 dB
-9 dB
-3 dB
-6 dB
-9 dB
Frequency (Hz)
100
Beamwidth (deg)
10
201001k10k20k
Frequency (Hz)
4 of 13
Page 5
5 o
f 1
3
Product Information Document
Portable Speakers
NuQ 10 2
2 Way 10" Full Range Loudspeaker
for Portable PA and
Installation Applications
Horizontal Polar Plots
120
150
1800
210
240
120
150
1800
210
90
270
90
60
0
-6
30
330
300
60
0
-6
30
330
200 Hz
250 Hz
315 Hz
400 Hz
1200 Hz
1600 Hz
2000 Hz
2500 Hz
120
90
150
1800
210
240
270
90
120
150
1800
210
60
0
-6
30
330
300
60
0
-6
30
330
500 Hz
630 Hz
800 Hz
1000 Hz
3150 Hz
4000 Hz
5000 Hz
6300 Hz
240
270
90
120
150
1800
210
240
270
300
8000 Hz
330
30
10000 Hz
12500 Hz
16000 Hz
60
0
-6
300
240
270
300
5 of 13
Page 6
6 o
f 1
3
Product Information Document
Portable Speakers
NuQ 10 2
2 Way 10" Full Range Loudspeaker
for Portable PA and
Installation Applications
Vertical Polar Plots
120
150
1800
210
240
120
150
1800
210
90
270
90
60
0
-6
30
330
300
60
0
-6
30
330
200 Hz
250 Hz
315 Hz
400 Hz
1200 Hz
1600 Hz
2000 Hz
2500 Hz
120
90
150
1800
210
240
270
90
120
150
1800
210
60
0
-6
30
330
300
60
0
-6
30
330
500 Hz
630 Hz
800 Hz
1000 Hz
3150 Hz
4000 Hz
5000 Hz
6300 Hz
240
270
90
120
150
1800
210
240
270
300
60
0
-6
30
330
300
8000 Hz
10000 Hz
12500 Hz
16000 Hz
240
270
300
6 of 13
Page 7
7 o
f 1
3
Product Information Document
Portable Speakers
NuQ 10 2
2 Way 10" Full Range Loudspeaker
for Portable PA and
Installation Applications
Dimensions
165 [6.5]
258 [10.2]
65 [2.6]
136 [5.4]
525 [20.7]
69.9 [2.8]
318 [12.5]
40 [1.6]
244 [9.6]
TOP
88 [3.5]
70 [2.8]
101 [4.0]
37 [1.5]
45°
244 [9.6]
127 [5.0]
BOTTOM
165 [6.5]
45°
165 [6.5]
136 [5.4]
186.5 [7.3]76 [3.0]
165 [6.5]
FRONT
37 [1.5]
SIDEBACK
7 of 13
Page 8
8 o
f 1
3
Product Information Document
Portable Speakers
NuQ 10 2
2 Way 10" Full Range Loudspeaker
for Portable PA and
Installation Applications
Mounting and Rigging
The cabinet is tted with M10 x 8, M8 x 3, and M6 x 4 internally-threaded rigging points that allow it to be rigged with optional shoulder eyebolts
and mounted in many di erent con gurations in permanent installations. The simplest method of rigging is to use the two M10 rigging points
on the top, and a single pull-back rigging point in the centre of the rear panel. Adjustment of the length of the rear cable allows the cabinet to
be angled for optimum room coverage. Cabinets may also be hung upside down if required.
The cabinet has an integral 35 mm pole mount socket in the bottom panel, that allows it to be pole mounted. The cabinet is compatible with
TURBOSOUND brackets, and industry standard brackets.
The optional NuQ102-SB swivel bracket allows the cabinet to be surface mounted and angled for optimum positioning and coverage.
TheNuQ102-EB extender bracket allows cabinets to be arrayed, and the NuQ102-FY y yoke adds further installation exibility for sca old,
surface, and pole mounting.
Suspension using M10
shoulder eyebolts.
Mounting on 35 mm
pole or speaker stand.
NuQ102-SB
swivel bracket for
surface mounting.
NuQ102-SB bracket with NuQ102-EB
extender brackets, creating an array.
NuQ102-FY y yoke.
8 of 13
Page 9
9 o
f 1
3
Product Information Document
Portable Speakers
NuQ 10 2
2 Way 10" Full Range Loudspeaker
for Portable PA and
Installation Applications
Technical Speci cations
System
Frequency Response55 Hz – 18 kHz ±3 dB50 Hz – 20 kHz -10 dB
Nominal Dispersion 100° H x 60° V @ -6 dB points, rotatable
Directivity Factor (Q) 8
Directivity Index (DI) 9
Power Handling (IEC)
Passive 300 W continuous, 1,200 W peak
Bi-amp LF: 300 W continuous, 1,200 W peak
HF: 30 W continuous, 120 W peak
Sensitivity 93 dB (1 W @ 1 m)
Maximum SPL
Passive 118 dB continuous, 124 dB peak
Bi-Amp LF: 118 dB continuous, 124 dB peak
HF: 119 dB continuous, 125 dB peak
Dimensions (H x W x D) 525 x 318 x 258 mm (20.7 x 12.5 x 10.2")
Net Weight 12.7 kg (27.9 lbs)
Construction 12 mm (½ ") birch plywood
Finish Semi matt black paint
Grille Powder-coated perforated steel
Flying Hardware M10 x 8, M8 x 3, and M6 x 4 points
Accessories
NuQ102-SB
NuQ102-EB
NuQ102-FY
Bi-Amp LF: 8 Ohms
HF: 6 Ohms
Crossover Type Passive / bi-amp, switchable
Components 1 x 10" (261 mm) LF driver
1 x 1" (25 mm) HF compression driver
9 of 13
Page 10
10
of
13
Product Information Document
Portable Speakers
NuQ 10 2
2 Way 10" Full Range Loudspeaker
for Portable PA and
Installation Applications
Architecture & Engineering Speci cations
The speaker shall be of the full range, two-way switchable bi-amp/passive type consisting of one 10" (261 mm) LF driver and one 1" (25mm) HF
compression driver. Performance speci cations of a typical production unit shall meet or exceed the following: frequency response, measuredwith
swept sine wave input, shall be at within ±3 dB from 55 Hz to 18 kHz and within -10 dB from 50 Hz to 20 kHz. Nominal dispersion, at -6 dB
points, shall average 100° H x 60° V, rotatable. Nominal impedance shall be HF: 6 Ohms, LF: 8 Ohms; passive: 8 Ohms. Power handling shall be HF:
30 Watts continuous, 120 Watts peak, LF: 300 Watts continuous, 1,200 Watts peak; passive: 300 Watts continuous, 1,200 Watts peak. Sensitivity,
measured on axis, mean averaged over stated bandwidth, shall be 93 dB, 1 Watt @ 1 metre. Maximum SPL (peak), measured at 1 metre with music
program at stated ampli er input, shall be HF: 125 dB, LF: 124 dB; passive: 124 dB. Dimensions: 525 mm high x 318 mm wide x 258 mm deep
(20.7" x 12.5" x 10.2"). Net weight: 12.7 kg (27.9 lbs). The loudspeaker system shall be the TURBOSOUND NuQ102. No other loudspeaker shall be
acceptable unless submitted data from an independent test laboratory veri es that the above combined performance / size speci cations are
equaled or exceeded.
10 of 13
Page 11
11
of
13
Product Information Document
Portable Speakers
NuQ 10 2
2 Way 10" Full Range Loudspeaker
for Portable PA and
Installation Applications
11 of 13
Page 12
12
of
13
Product Information Document
Portable Speakers
NuQ 10 2
2 Way 10" Full Range Loudspeaker
for Portable PA and
Installation Applications
12 of 13
Page 13
Product Information Document
Portable Speakers
NuQ 10 2
2 Way 10" Full Range Loudspeaker
for Portable PA and
Installation Applications
For service, support or more information contact the TURBOSOUND location nearest you: