Turbosound Milan M15 User manual
Product Information Document
Portable Speakers
MILAN
M15
1,100 Watt 2 Way 15" Full Range
Powered Loudspeaker with KLARK TEKNIK
DSP Technology for Portable PA and
Installation Applications
2 way full range powered
#
loudspeaker for portable PA and
install applications
1,100 Watt power featuring
#
KLARK TEKNIK Class-D technology
KLARK TEKNIK Digital Signal
#
Processing for total system control
High excursion 15" low frequency
#
driver with low mass voice coil for
improved transient response
1" high temperature dome
#
compression driver with extended
high frequency reproduction
Converging elliptical waveguide
#
provides wide dispersion and
excellent pattern control
The MILAN M15 is a portable 15"
two-way powered loudspeaker
featuring two independent input
channels, mic and line inputs, two
band EQ, intelligent limiting, and a
Mix Out function for connection to
additional MILAN loudspeakers for
easy system expansion.
Speech/music switch featuring
#
optimised equalisation for voice or
music applications
Switchable 100 Hz high pass lter for
#
subwoofer integration
Lightweight composite enclosure
#
with black nish
Rugged powder coated perforated
#
steel mesh grille
Dual angle pole mount for accurate
#
audience coverage
Multiple internal rigging points for
#
installation applications
3-Year Warranty Program*
#
Designed and engineered
#
in England
The Class-D ampli er is a two channel
unit with an integrated electronic
crossover, allowing the HF and LF
drivers to be powered separately
without one being able to in uence
the sound of the other. Total output
power is 1,100 watts peak, providing
plenty of headroom to maintain
good dynamic range so that transient
signals are delivered e ortlessly.
The lightweight switch-mode power
supply coupled with industry leading Klark Teknik digital signal processing,
providing dynamic equalisation and sophisticated limiting functions to
ensure optimum performance and long term reliability.
The two discrete input channels are each equipped with balanced,
combination jack/XLR connectors and a level control, catering for a range
of music sources from low impedance microphones, acoustic guitars and
keyboards to mp3 players and mixing consoles, selectable via a mic/line
slide switch.
*Warrant y details can be fo und at music-group.c om
Product Information Document
Portable Speakers
MILAN
M15
1,100 Watt 2 Way 15" Full Range
Powered Loudspeaker with KLARK TEKNIK
DSP Technology for Portable PA and
Installation Applications
Common to both channels are bass and treble controls with ±6 dB of cut or boost to allow the loudspeaker to be equalised to the venue. In
addition, a low cut lter is provided at 100 Hz to shelve the low frequency response when used on the oor as a wedge monitor, or to ensure
correct integration with subwoofers. A speech/music switch optimises the loudspeaker’s frequency response either for predominantly vocal
material or for music programme. A Mix Out function sends the mix of both input channels post-EQ to additional MILAN loudspeakers on a
balanced male XLR for easy system expansion.
The trapezoidal enclosure is fabricated from high density polypropylene, and is extensively ribbed externally and internally to eliminate
resonances and also to provide an attractive and durable cabinet nish. The symmetrical side angles allow the loudspeaker to be conveniently
used as a oor monitor. A recessed grab handle on the top is designed for easy lifting and carrying, while the dual angle pole mount socket
allows the loudspeaker to be mounted on straight poles or speaker stands either vertically, or raise higher and angled down to optimise audience
coverage. A total of six M10 rigging points are provided on the top and bottom of the cabinet to enable vertical or horizontal suspension in
permanent installations using M10 shoulder eyebolts.
Mains power is connected via a non-locking IEC receptacle with integrated fuseholder. The illuminated front badge can operate in one of three
possible modes: permanently on; permanently o ; or to indicate the action of limiting.
Rigging
The MILAN M15 loudspeaker can be wall mounted using the PB-55 universal wall bracket with the built in pole mount socket.
It can also be suspended in permanent installations using shoulder eyebolts attached to the M10 rigging points provided on the top and bottom
of the cabinet. The loudspeaker can be oriented either vertically or horizontally to suit the available venue space.
2 of 8
Product Information Document
Portable Speakers
MILAN
M15
1,100 Watt 2 Way 15" Full Range
Powered Loudspeaker with KLARK TEKNIK
DSP Technology for Portable PA and
Installation Applications
A&E Speci cations
The system shall be of the two-way self-powered type consisting of one 15" (381 mm) low frequency loudspeaker and one 1" (25 mm) aluminium
diaphragm high frequency compression driver together with an integrated Class-D ampli er providing two independent input channels with
microphone and line inputs, bass and treble equalisation, low cut lter, speech/music contour and Mix Out function. Performance speci cations
of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be at within
±3 dB from 45 Hz to 18 kHz, and within -10 dB from 40 Hz to 20 kHz. Nominal dispersion, at -6 dB points, shall average 90° H x 60° V. Maximum
SPL measured with music program input shall be 130 dB (peak).
Dimensions: 719 mm high x 457 mm wide x 368 mm deep (28.3" x 18" x 14.5"). Net weight: 27.7 kg (60.9 lbs). The loudspeaker system shall be the
Turbosound MILAN M15. No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verify that the
above combined performance / size speci cations are equalled or exceeded.
3 of 8
Loading...