Turbosound iQ12 Product Information
Product Information Document
Portable
iQ12
2500 Watt 2 Way
12" Powered Loudspeaker with
KLARK TEKNIK DSP Technology,
Speaker Modelling and
ULTRANET Networking
2 way full range loudspeaker
for portable PA and
installation applications
2,500 Watt power featuring
KLARK TEKNIK Class-D technology
KLARK TEKNIK Digital Signal
Processing for total system control
Speaker modelling includes
accurate models of industry
standard speakers
SCC (Spatial Contour Control)
compensates frequency
response in relation to physical
speaker placement
ULTRANET digital audio
networking connects to mixers and
other sources
12" low frequency driver with low
mass voice coil for improved
transient response
High temperature 1" compression
driver with copper-clad aluminium
voice coil for extended high
frequency reproduction
Fully featured user interface with
LCD display for ease of navigation
PC remote control software
downloadable at turbosound.com
Lightweight bre glass reinforced
composite enclosure
The 2,500-Watt iQ12 is a powered
two-way loudspeaker ideally suited
for a wide range of portable and
xed installation, music and speech
sound reinforcement applications.
The driver complement includes an
12" low frequency driver with a low
mass voice coil for improved transient
response, and a high temperature
1" compression driver with copper-
clad aluminium voice coil for extended
high frequency reproduction.
Equipped with a very ecient and lightweight two channel KLARK TEKNIK
Class-D power amplier, the iQ12 provides an impressive 2,500 Watts of
output power. A high degree of control over the loudspeaker system’s
performance is managed by a sophisticated, but easy to use KLARK TEKNIK
Digital Signal Processor (DSP), which provides dynamic EQ for remarkable
full range response at low volume levels, and transparent limiting for the
utmost clarity at high output levels – and long-term reliability. iQ12’s
advanced DSP speaker modelling presets include detailed and accurate
models of some of the audio industry’s most-respected loudspeakers.
Rugged powder coated perforated
steel mesh grille
Dual angle pole mount for accurate
audience coverage
KLARK TEKNIK also developed a highly versatile Spatial Contour Control
(SCC) DSP function, which allows the user to easily optimise the iQ12’s
frequency response for the physical speaker placement. This advanced
functionality provides frequency compensation for stand, oor, wall or
ceiling placement, much like the adjustments commonly found on studio
reference monitors.
Product Information Document
Portable
iQ12
2500 Watt 2 Way
12" Powered Loudspeaker with
KLARK TEKNIK DSP Technology,
Speaker Modelling and
ULTRANET Networking
Multiple internal rigging points for
installation applications
Mains input and link output on
Neutrik powerCON* connectors
10-Year Warranty Program*
Designed and engineered in the U.K.
On the rear panel amplier module, you will nd a fully featured user
interface consisting of an LCD display, the Channel A and B gain controls,
and a single rotary encoder for intuitive access to level, EQ, Speaker
modelling, SCC, Subwoofer Integration and Feedback Control (FBI).
In addition to the two combination balanced XLR/jack inputs, balanced
XLR outputs for each of the two independent channels, and a Mix Out XLR
connector, the iQ8 features a mic/line switch and level control with signal
present LED on each channel.
The iQ8 also features our proprietary ULTRANET technology, which allows
the use of CAT5 cables for transmitting pristine multi-channel audio
signals and other information between ULTRANET-enabled products, such
as digital mixers and personal monitor systems. This digital distribution
networking not only eliminates the potential for RFI and crosstalk so
common to analogue methods, but also signicantly reduces the setup or
installation time required. An onboard USB port provides access for remote
control of the iQ8 via PC computer, as well as DSP and speaker modelling
rmware updates.
The lightweight bre glass reinforced composite enclosure is tted with a
rugged powder coated perforated steel mesh grille and multiple internal
rigging points for permanent installations. The iQ8 is also tted with a
dual angle pole mount socket, allowing the enclosure to be pole mounted
straight on, or raised and angled downwards for optimal audience
coverage. Mains power input and link output is provided via Neutrik
powerCON* connectors.
*All third-pa rty tradema rks are the prop erty of their re spective owne rs.
Their use n either constitu tes a claim of the trad emark nor aliati on of
the tradem ark owners with MU SIC Tribe. Product na mes are mentione d
solely as a reference for compatibility, eects and/or components.
Warranty d etails can be foun d at musictri.b e.
2 of 13
Product Information Document
Portable
iQ12
2500 Watt 2 Way
12" Powered Loudspeaker with
KLARK TEKNIK DSP Technology,
Speaker Modelling and
ULTRANET Networking
You Are Covered
We always strive to provide the best possible Customer Experience. Our products are made in our
own MUSIC Tribe factory using state-of-the-art automation, enhanced production workows and
quality assurance labs with the most sophisticated test equipment available in the world. As a result,
we have one of the lowest product failure rates in the industry, and we condently back it up with a
generous Warranty program.
3 of 13
Product Information Document
Portable
iQ12
2500 Watt 2 Way
12" Powered Loudspeaker with
KLARK TEKNIK DSP Technology,
Speaker Modelling and
ULTRANET Networking
Frequency Response Sensitivity 1 W / 1 m
110
104
98
92
86
80
Sound Pressure Level (dB)
74
68
62
20 100 1k 10k 20k
Full Range
Frequency (Hz)
4 of 13
Loading...