Tunturi Pure F 4.1 User Manual
Serial number
Seriennummer
User Manual
Pure Cross F 4.1
USER MANUAL ..............................03-21
BETRIEBSANLEITUNG .................22-41
MODE D'EMPLOI ...........................42-62
HANDLEIDING ...............................63-81
www.tunturi.com
Serial number
Seriennummer
Numero de serie
Serienummer
Owner’s manual • Pure 4.1
GB
Contents
WELCOME ........................................... 3
SAFETY WARNINGS ........................... 3
Electrical safety ................................... 4
ASSEMBLY .......................................... 5
Parts out of box .................................... 5
Hardware kit ......................................... 5
General assembly information .............. 5
Assembly steps .................................... 5
USE .................................................... 10
Adjusting the support feet ................... 10
WORKOUTS ...................................... 10
Pulse rate measurement .................... 10
Heart rate measurement .................... 10
Maximum heart rate.............................11
USER INTERFACE ............................ 12
Display functions ................................ 12
Key functions ...................................... 12
Extra functions .................................... 12
PROGRAMS ...................................... 12
Manual mode ...................................... 13
Beginner mode ................................... 13
Advance mode.................................... 14
Sporty mode ....................................... 14
Cardio mode ....................................... 15
Watt mode .......................................... 15
Body fat .............................................. 16
Recovery ............................................ 16
I-CONSOLE APP ............................... 17
Start up ............................................... 17
User setting ........................................ 18
User data set ...................................... 18
Workout selection .............................. 18
Manual program ................................. 18
I-Route ................................................ 18
Program .............................................. 19
Watt Control ........................................ 19
Cardio control ..................................... 19
Stop workout....................................... 19
Workout summary .............................. 20
CLEANING AND MAINTENANCE .... 20
TRANSPORT AND STORAGE .......... 20
DISCLAIMER ..................................... 21
WARRANTY ....................................... 21
SPECIFICATIONS .............................. 83
Parts list .............................................. 83
Exploded view .................................... 85
Welcome
Welcome to the world of Tunturi New
Fitness!
Thank you for purchasing this piece of
Tunturi equipment. Tunturi offers a wide
range of professional fitness equipment,
including cross trainers, treadmills,
exercise bikes, and rowers. The Tunturi
equipment is suitable for the entire
family, no matter what fitness level.
For more information, please visit our
website www.tunturi.com
Safety warnings
WARNING
Read the safety warnings and
the instructions. Failure to follow the
safety warnings and the instructions can
cause personal injury or damage to the
equipment. Keep the safety warnings
and the instructions for future reference.
WARNING
Heart rate monitoring systems
may be inaccurate. Over exercise may
result in serious injury or death. If you
feel faint stop exercising immediately.
• The equipment is suitable for home
use only. Max. usage is limited to
3 hrs a day. The equipment is not
suitable for full commercial use (e.g.
large gyms).
• The use of this equipment by children
or persons with a physical, sensory,
• mental or motorial disability, or lack
of experience and knowledge can
give cause to hazards. Persons
responsible for their safety must give
explicit instructions or supervise the
use of the equipment.
• Before starting your workout, consult
a physician to check your health.
• If you experience nausea, dizziness
or other abnormal symptoms,
immediately stop your workout and
consult a physician.
3
• To avoid muscular pain and strain
start each workout by warming up
and finish each workout by cooling
down. Remember to stretch at the
end of the workout.
• The equipment is suitable for indoor
use only. The equipment is not
suitable for outdoor use.
• Only use the equipment in
environments with adequate
ventilation. Do not use the equipment
in draughty environments in order not
to catch a cold.
• Only use the equipment in
environments with ambient
temperatures between 10 °C and
35 °C. Only store the equipment
in environments with ambient
temperatures between 5 °C and
45 °C.
• Do not use or store the equipment in
humid surroundings. The air humidity
must never be more than 80%.
• Only use the equipment for its
intended purpose. Do not use the
equipment for other purposes than
described in the manual.
• Do not use the equipment if any part
is damaged or defective. If a part is
damaged or defective, contact your
dealer.
• Keep your hands, feet and other
body parts away from the moving
parts.
• Keep your hair away from the moving
parts.
• Wear appropriate clothing and shoes.
• Keep clothing, jewellery and other
objects away from the moving parts.
• Make sure that only one person
uses the equipment at a time. The
equipment must not be used by
persons weighing more than 150kg
(330 lbs).
• Do not open equipment without
consulting your dealer.
Electrical safety
(only for equipment with electric power)
• Before use, always check that the
mains voltage is the same as the
voltage on the rating plate of the
equipment.
• Do not use an extension cable.
• Keep the mains cable away from
heat, oil and sharp edges.
• Do not alter or modify the mains
cable or the mains plug.
• Do not use the equipment if the
mains cable or the mains plug is
damaged or defective. If the mains
cable or the mains plug is damaged
or defective, contact your dealer.
• Always fully unwind the mains cable.
• Do not run the mains cable
underneath the equipment. Do not
run the mains cable underneath a
carpet. Do not place any objects on
the mains cable.
• Make sure that the mains cable does
not hang over the edge of a table.
Make sure that the mains cable
cannot be caught accidentally or
tripped over.
• Do not leave the equipment
unattended when the mains plug is
inserted into the wall socket.
• Do not pull the mains cable to
remove the mains plug from the wall
socket.
• Remove the mains plug from the
wall socket when the equipment
is not in use, before assembly or
disassembly and before cleaning and
maintenance.
Pure 4.1
Owner’s manual
4
•
Assembly
Parts out of box
Owner’s manual • Pure 4.1
WARNING
• Assemble the equipment in the given
order.
• Carry and move the equipment with
at least two persons.
CAUTION
• Place the equipment on a firm, level
surface.
• Place the equipment on a protective
base to prevent damage to the floor
surface.
• Allow at least 100 cm of clearance
around the equipment.
GB
The package contains the parts as
shown in figure.
If a part is missing, contact your dealer.
Hardware kit
The package contains the fasteners as
shown in figure.
If a part is missing, contact your dealer.
General assembly information
Refer to the illustrations for the correct
assembly of the equipment.
Assembly steps
Assembly step A
• Fit height adjustment pads to the
front stabilizer.
• Fit front stabilizer by using the shown
hardware.
5
Remark:
First put all screws/ bolts in correct place
before tightening them fully.
Assembly step B
• Fit height adjustment pads to the rear
stabilizer.
• Fit rear stabilizer by using the shown
hardware.
Remark:
First put all screws/ bolts in correct place
before tightening them fully.
Assembly step C
Assembly step D
• Connect the wires from upright tube
and main frame before sliding the
upright tube in position.
Remark:
Do not remove screws from the frame
before siding the upright tube in position.
• Use the enclosed Allen key to tighten
both fastening screws through the
holes in the tube from inside out.
• Tighten the fastening screws by
turning them counter-clockwise.
Remark:
First tighten all 6 bolts hand tight before
tightening them fully. This to avoid miss
alignment
Pure 4.1
•
• Fix height adjustment pads to the
U shape rail
• Fix U shape rail with the rear
stabilizer.
Remark:
First tighten all 4 bolts hand tight before
tightening them fully. This to avoid miss
alignment
Assembly step E
• Stabilize the upright tube as shown
in picture.
Owner’s manual
6
Owner’s manual • Pure 4.1
GB
Assembly step F
• Fix both fixed handle bar tubes as
shown in picture.
Remark:
First put all screws/ bolts in correct place
before tightening them fully.
Assembly step G
Assembly step H
• Push the metal shaft through the
bracket housing of the left arm.
Attach now the left arm to the front
frame tube by pushing the metal
shaft through the opening in the tube.
Push the right arm on the shaft and
lock it by tightening a large washer,
and a screw to the both ends of the
shaft. Tighten the arms using two
Allen keys.
• Guide the hand pulse wires coming
from the handlebar and data cable
coming form upright tube through the
console bracket hole.
• remove the 4 assembly screws from
the consoles rear cover.
• Connect the hand pulse wires and
data cable with the console.
• Fix the console to the console
bracket.
Remark:
Avoid the wires to damage during
assembly
Remark:
A think shim washer is in between both
swivel arms and front frame tube..
• Fix the bottle holder to the upright
tube.
Assembly step I
• Fix upper moving handle bars as
shown in picture.
7
Assembly step J
Assembly step L
• Fix both fixed pedal posts with the
both crank arms as shown in picture.
Remark:
Pedal posts are marked with
“L” and “R” label.
L = Left hand side pedal post
R = Right hand side pedal post.
Assembly step K
• Fix foot rest to the right hand side
outer pedal post as shown in picture.
Left hand outer pedal post is marked
with an “R” label
Remark:
First put all screws/ bolts in correct place
before tightening them fully.
Assembly step M
Pure 4.1
Owner’s manual
8
• Fix foot rest to the left hand side
outer pedal post as shown in picture.
Left hand outer pedal post is marked
• Connect pedal left outer pedal post
with the left pedal tube as shown in
picture.
with an “L” label
Remark:
Remark:
First put all screws/ bolts in correct place
First put all screws/ bolts in correct place
before tightening them fully.
before tightening them fully.
•
Owner’s manual • Pure 4.1
GB
Assembly step N
• Connect pedal right outer pedal post
with the right pedal tube as shown in
picture.
Remark:
First put all screws/ bolts in correct place
before tightening them fully.
Assembly step O
Assembly step P
• Fix right outer pedal post to right
lower swivel handle bar shown in
picture.
Assembly step Q
• The power cord input can be found
on the front side of the trainer
• Fix left outer pedal post to left lower
swivel handle bar shown in picture.
9
Pure 4.1
•
Use
Adjusting the support feet
The equipment is equipped with 4
support feet. If the equipment is not
stable, the support feet can be adjusted.
1. Turn the support feet as required
to put the equipment in a stable
position.
2. Tighten the locknuts to lock the
support feet.
NOTE
The machine is the most stable when all
support feet are turned fully in. Therefore
start to level the machine by turning all
support feet fully in, before turning out
the required support feet to stable the
machine.
Workouts
The workout must be suitably light, but
of long duration. Aerobic exercise is
based on improving the body’s maximum
oxygen uptake, which in turn improves
endurance and fitness. You should
perspire, but you should not get out of
breath during the workout.
To reach and maintain a basic fitness
level, exercise at least three times a
week, 30 minutes at a time. Increase the
number of exercise sessions to improve
your fitness level. It is worthwhile to
combine regular exercise with a healthy
diet. A person committed to dieting
should exercise daily, at first 30 minutes
or less at a time, gradually increasing the
daily workout time to one hour.
Start your workout at low speed and low
resistance to prevent the cardiovascular
system from being subjected to
excessive strain. As the fitness level
improves, speed and resistance can
be increased gradually. The efficiency
of your exercise can be measured by
monitoring your heart rate and your
pulse rate.
Pulse rate measurement
(hand pulse sensors)
The pulse rate is measured by sensors
in the handlebars when the user is
touching both sensors at the same time.
WARNING
Heart rate monitoring systems may be
inaccurate. Over exercise may result in
serious injury or death. If you feel faint
stop exercising immediately.
Most accurate pulse measurement is
achieved when the skin is slightly moist
and constantly touching the hand pulse
sensors. If the skin is too dry or too
moist, the pulse rate measurement might
become less accurate.
NOTE
Do not use the hand pulse sensors in
combination with a heart rate chest belt.
If you set a heart rate limit for your
workout, an alarm will sound when it is
exceeded.
Heart rate measurement
(heart rate chest belt)
The most accurate heart rate
measurement is achieved with a
heart rate chest belt. The heart rate is
measured by a heart rate receiver in
combination with a heart rate transmitter
belt. Accurate heart measurement
requires that the electrodes on the
transmitter belt are slight moist and
constantly touching the skin. If the
electrodes are too dry or too moist, the
heart rate measurement might become
less accurate.
WARNING
If you have a pacemaker, consult a
physician before using a heart rate chest
belt.
Owner’s manual
10
Owner’s manual • Pure 4.1
GB
CAUTION
If there are several heart rate
measurement devices next to each
other, make sure that the distance
between them is at least 2 meter.
If there is only one heart rate receiver
and several heart rate transmitters,
make sure that only one person with a
transmitter is within transmission range.
NOTE
• Do not use a heart rate chest belt
in combination with the hand pulse
sensors.
• Always wear the heart rate chest belt
under your clothes directly in contact
with your skin. Do not wear the heart
rate chest belt above your clothes.
If you wear the heart rate chest belt
above your clothes, there will be no
signal.
• If you set a heart rate limit for your
workout, an alarm will sound when it
is exceeded.
• The transmitter transmits the heart
rate to the console up to a distance
of 1,5 meter. If the electrodes are not
moist, the heart rate will not appear
on the display.
• Some fibres in clothes (e.g. polyester,
polyamide) create static electricity
which can prevent accurate heart
rate measurement.
• Mobile phones, televisions and
other electrical appliances create
an electromagnetic field which
can prevent accurate heart rate
measurement.
WARNING
Make sure that you do not exceed
your maximum heart rate during your
workout. If you belong to a risk group,
consult a physician.
Beginner: (50-60% of max. heart rate)
Suitable for beginners, weight-watchers,
convalescents and persons who have
not exercised for a long time. Exercise at
least three times a week, 30 minutes at
a time.
Advance: (60-70% or max. heart rate)
Suitable for persons who want to
improve and maintain fitness. Exercise
at least three times a week, 30 minutes
at a time.
Expert: (70-80% or max. heart rate)
Suitable for the fittest of persons who are
used to long-endurance workouts.
Maximum heart rate
(during training)
The maximum heart rate is the highest
heart rate a person can safely achieve
through exercise stress. The following
formula is used to calculate the average
maximum heart rate: 220 - AGE. The
maximum heart rate varies from person
to person.
11
User interface
Display functions
Time window :
Shows workout time during exercise
Range: 0:00 ~ 99:59
Speed window :
Shows actual speed during exercise
Range: 0.0 ~ 99.9
Key functions
Body fat key :
Test body fat in % and BMI.
Recovery key :
Test heart rate recovery status.
Down key :
Decrease resistance level during
workout.
In setting selection lower value.
Mode key :
Confirm setting or selection
Up key :
Increase resistance level during workout.
In setting selection upper value.
Reset key :
When press and hold for 2 seconds,
display will reboot and start from main
menu. (all shown data will be lost)
Reverse to main menu during presetting
workout value or stop mode
Start/ stop key :
Start workout when in idle mode.
Stop/ pause workout when in active
mode.
Pure 4.1
•
RPM window :
Shows revolutions per minute during
exercise
Range: 0 ~ 999
Watt window :
Shows workout watt power during
exercise.
In watt program ode, console will show
preset watt value.
Setting range: 0 ~ 350
Pulse window :
Shows pulse in bpm during exercise
Distance window :
Shows workout distance during exercise.
Range: 0.0 ~99.9
Calories window :
Shows burned calories during exercise
Range: 0 ~999
Extra functions
• Choose settings for units by using the
Metric/ Imperial switch located on the
back cover of the console
Console needs to reboot to apply the
change.
• When setting one or more targets,
the target value starts to count up
when reached “0”
Programs
• Power on the display or use reset key
function to go to main menu.
• Press Up key or Down Key to select
workout program.
• Available programs are: Quick start,
Manual, beginner, Advance, Sporty,
Cardio and Watt program.
Owner’s manual
12
Owner’s manual • Pure 4.1
GB
Manual mode
For Quick start you can
• Press Start/ stop key to start workout
without any preset setting..
During workout you can press Up/ Down
key to adjust resistance level.
Quick start mode stops when, no input
for longer than 4 minutes or when Start/
stop key is pressed.
When settings in manual mode are
required than you;
• Press Up/ Down key to select
workout program, choose Manual
mode and press mode key to enter
next setting entry for manual mode
program.
• Press Up/ Down key to preset
training time, and press Mode key to
confirm the setting.
• After confirm you can set also (also):
distance, Calories, and Pulse.
Beginner mode
• Press Up/ Down key to select
workout program, choose beginner
mode and press Mode key to enter
next setting menu for beginner mode.
• There can be 4 beginner modes
selected: beginner 1, beginner 2,
beginner 3, and beginner 4. Select
one by using the Up/ Down key and
confirm selected by pressing Mode
key.
Note:
When setting more than one goal, the
training will end at first achieved goal.
Leave a goal blank and it will not be
seen as a preset limit.
• Press Start/ Stop key to start workout
• Press Up/ Down key to adjust
resistance level
• Press Start/ stop key to pause
workout.
• Press Reset key to return to main
menu. (active training data will be
lost)
• Press Up/ Down key to preset
training time, and press Mode key to
confirm the setting.
• After confirm you can set also (also):
distance, Calories, and Pulse.
Note:
When setting more than one goal, the
training will end at first achieved goal.
Leave a goal blank and it will not be
seen as a preset limit.
• Press Start/ Stop key to start workout
• Press Up/ Down key to adjust
resistance level
• Press Start/ stop key to pause
workout.
• Press Reset key to return to main
menu. (active training data will be
lost)
13
Advance mode
Sporty mode
• Press Up/ Down key to select
workout program, choose advance
mode and press Mode key to enter
next setting menu for advance mode.
• There can be 4 advance modes
selected: advance 1, advance 2,
advance 3, and advance 4. Select
one by using the Up/ Down key and
confirm selected by pressing Mode
key.
• Press Up/ Down key to select
workout program, choose sporty
mode and press Mode key to enter
next setting menu for sporty mode.
• There can be 4 Sporty modes
selected: sporty 1, sporty 2,
sporty 3, and sporty 4. Select one
by using the Up key or Down key
and confirm selected by pressing
Mode key.
Pure 4.1
•
• Press Up/ Down key to preset
training time, and press Mode key to
confirm the setting.
• After confirm you can set also (also):
distance, Calories, and Pulse.
Note:
When setting more than one goal, the
training will end at first achieved goal.
Leave a goal blank and it will not be
seen as a preset limit.
• Press Start/ Stop key to start workout
• Press Up/ Down key to adjust
resistance level
• Press Start/ stop key to pause
workout.
• Press Reset key to return to main
menu. (active training data will be
lost)
• Press Up/ Down key to preset
training time, and press Mode key to
confirm the setting.
• After confirm you can set also (also):
distance, Calories, and Pulse.
Note:
When setting more than one goal, the
training will end at first achieved goal.
Leave a goal blank and it will not be
seen as a preset limit.
• Press Start/ Stop key to start workout
• Press Up/ Down key to adjust
resistance level
• Press Start/ stop key to pause
workout.
• Press Reset key to return to main
menu. (active training data will be
lost)
Owner’s manual
14
Owner’s manual • Pure 4.1
GB
Cardio mode
• Press Up/ Down key to select
workout program, choose cardio
mode and press Mode key to enter
next setting menu for advance mode.
• Press Up/ Down key to set your age
and confirm by pressing mode key.
• There can be 4 cardio modes
selected:55%, 75%,90%
or TAG (target heart rate) default set
on 100 (us Up/ Down key to change,
and confirm by pressing mode key).
Select one by using the Up/ Down
key and confirm selected by pressing
Mode key.
Watt mode
• Press Up/ Down key to select
workout program, choose watt mode
and press Mode key to enter next
setting menu for advance mode.
• Press Up/ Down key to set watt target
(default set on 120) and confirm by
pressing mode key.
• Press Up/ Down key to preset
training time, and press Mode key to
confirm the setting.
• Console will adjust tension level by
the watt target and workout status
(rpm)
• Press Up/ Down key to preset
training time, and press Mode key to
confirm the setting.
• Press Start/ stop key to pause
workout.
• Press Reset key to return to main
menu. (active training data will be
lost)
Note:
After 6 seconds without pulse input, LCD
will show “Pulse Input” to notify the user.
• User can use Up/ Down key to adjust
watt target during workout.
• Press Start/ stop key to pause
workout.
• Press Reset key to return to main
menu. (active training data will be
lost)
15
Body fat
Recovery
In stop mode, press Body fat key to start
this function.
• Set Gender by using Up/ Down key
and confirm by Mode key.
• Set Age by using Up/ Down key and
confirm by Mode key.
• Set Height by using Up/ Down key
and confirm by Mode key.
• Set Weight by using Up/ Down key
and confirm by Mode key.
After confirm user must grab and hold
both hand pulse sensors.
Note:
If hand grips are grabbed incorrectly,
display cannot read and show
“---- “ “ ----”. re grab hand pulse
sensors again to see if improves.
When console can read the display will
show a progress bar.
display will show after finished
body fat in percentage and BMI as a
number by turns in every 3 seconds.
• After exercising for a period of
time, keep holding on hand grips
until display shows the actual pulse
reading.
• Press Recovery key, and re grab
hand grips
• All display functions will stop except
“TIME” that will start counting down
from 00:60 to 00:00.
• LCD will display your heart rate
recovery status with the F1, F2….to
F6.
F1 is the best result and F6 is the worst.
Press the RECOVERY button again to
return the main display.
Pure 4.1
•
Owner’s manual
Note:
During the recovery time, re-press
“RECOVERY” and console will go back
to previous page.
Note:
Error codes in body fat program are:
LCD show “---- “ “ ----”: hand grips
search for reading
E1: There is no heart rate signal input
detected for at least 5 seconds.
E4: Occurs when FAT% is below 5% or
exceeds 50%. Occurs when BMI result is
below 5 or exceeds 50.
16
I-Console App
We have developed an App, wich you
can download on your 10” tablet from
the app store (iOS: iPad) or Google Play
( Android Market: Samsung, HTC, LG,
etc.). You only have to type Tunturi and
it will search and find the App. This gives
you more possibilities to use our product
in combination with your 10” tablet.
To start the App, you have to connect
your tablet with bluetooth and search for
device TUN-xxx (number)! The password
you have to use to connect is
0000 ( 4 times zero ).
Owner’s manual • Pure 4.1
Help:
Press “Help” will show help menu when
available.
Exit:
Press “Exit” to close application.
GB
“Made for iPad” means that an electronic
accessory has been designed to
connect specially to the iPad and has
been certified by the developer to meet
Apple performance standards. Apple is
not responsible for the operation of this
device or its compliance with safety and
regulatory standards. Please note that
the user of this accessory with iPad may
affect wireless performance.
iPad is a trademark of Apple Inc.,
registered in the U.S. and other
countries.
Note:
Once the console is connected to the
tablet with Bluetooth, the console will
power off.
For iOs system, please exit the i-Console
app and turn off the Bluetooth from IPad,
then the console will power on again.
Knowledge:
Press Knowledge to show extra
information when available.
Setting:
• Before connect to Bluetooth, the user
may change the settings in “system”.
( Unit/ Language/ Password )
Press “Back” button to go back to
previous setting.
Start up
Connect:
• Press “Connect”, the i-Console
App will search for Bluetooth
automatically.
• Select the corresponding Bluetooth
signal and start workout.
17
User setting
User data set:
Press “User data set” to preset/ edit/
delete or select a user.
Quick start:
Press “Quick start” to start workout in
manual mode.
Guest:
Press “Guest” to start workout without
preset user data.
Create/ change user settings:
you can select:
• Avatar colour
• Age
• Height
• Weight
• Back ground colour.
Press “Next” to confirm change and go
to workout selection menu, or press
“Exit” to go back to former menu without
change.
Workout selection
After select user, the user may start
workout with: Manual/ i-Route/ Program/
program suggest or Watt,
Press “Back” button to go back to
previous setting.
User data set
Select user by using the navigation
buttons or press “Back” button to go
back to previous setting.
Manual program
Select “Manual”, preset: Time/ Distance/
Calories and press “Start” button to start
workout, or press “Back” button to go
back to previous setting.
Pure 4.1
Owner’s manual
18
•
I-Route
Select I-Route, the user may select
country and press next to select
corresponding route, or press “Back”
button to o back to previous setting.
Owner’s manual • Pure 4.1
Watt Control
select Watt and preset watt and time to
start workout.
Press/ swipe road map to switch display.
Cardio control
select Cardio and preset pulse and time
to start workout.
GB
Press/ swipe road map to switch display.
Program
Select program may select program
1~12 and user program.
preset: Time/ Distance/ Calories and
press “Start” button to start workout,
or press “Back” button to go back to
previous setting.
Stop workout
Press “Start” to resume workout.
Press “Home” to close application
Press “Stop” to save or stop the workout
and go back to main window.
Select “yes” to save
workout. Select “No” to go
back to program mode
without saving data.
19
Note:
Not able to save workout in Guest mode.
Workout summary
A workout summary is displayed at the
end of a workout.
Press “Home” to go back to main
window.
Press “Rank” to show ranking
• In rank mode, press “workout” to go
back to workout window
Cleaning and
maintenance
Defects and malfunctions Despite
continuous quality control, defects and
malfunctions caused by individual parts
can occur in the equipment. In most
cases, it will be sufficient to replace the
defective part.
• If the equipment does not function
properly, immediately contact the
dealer.
• Provide the model number and the
serial number of the equipment to
the dealer. State the nature of the
problem, conditions of use and
purchase date.
Transport and
storage
Press “Recovery” to start recovery
program.
WARNING
Carry and move the equipment with at
least two persons.
• Remain standing in front of the
equipment on each side and take a
sturdy grip at the handlebars. Lift the
front of the equipment so as to lift the
rear of the equipment on the wheels.
Move the equipment and carefully
put the equipment down. Place the
equipment on a protective base to
prevent damage to the floor surface.
• Move the equipment carefully over
uneven surfaces. Do not move the
equipment upstairs using the wheels,
but carry the equipment by the
handlebars.
• Store the equipment in a dry place
with as little temperature variation as
possible.
Pure 4.1
Owner’s manual
20
•
Note:
Recovery mode requires heart rate
reading
Disclaimer
2014 Tunturi New Fitness BV.
All rights reserved
The product and the manual are subject
to change. Specifications can be
changed without further notice
Warranty
The product has a warranty from the
date of delivery (to be documented by
invoice or delivery note).
Further information on warranty terms
can be obtained from your local dealer.
The warranty terms may vary from one
country to another. Damages caused by
normal wear, overloading or improper
handling are excluded from the warranty.
Damages caused by material or
manufacturing faults are covered by the
warranty and will repaired or replaced at
no cost.
Owner’s manual • Pure 4.1
GB
21
WILLKOMMEN .................................. 22
WARNHINWEISE ZUR SICHERHEIT 22
Elektrische Sicherheit ........................ 23
ZUSAMMENBAU ............................... 24
Verpackungsinhalt .............................. 24
Hardware kit ....................................... 24
Allgemeine zusammenbau ................. 24
Montageschritte ................................. 25
GEBRAUCH ....................................... 29
Einstellen der Stützfüße ..................... 29
TRAININGS ........................................ 29
Pulsfrequenzmessung ........................ 29
Herzfrequenzmessung ....................... 29
Maximale Herzfrequenz...................... 30
USER INTERFACE ............................ 31
Display Funktionen ............................. 31
Key Funktionen................................... 31
Extra Funktionen ................................ 31
Einschalten ......................................... 32
PROGRAMME ................................... 32
Manueller modus ................................ 32
Beginner Modus ................................ 33
Advance Modus ................................. 33
Sporty Modus .................................... 34
Cardio Modus .................................... 34
Watt Modus ....................................... 35
Recovery ............................................ 35
Body fat .............................................. 36
I-CONSOLE APP ............................... 37
Inbetriebnahme................................... 37
Benutzerdatensatz.............................. 38
Trainings Auswahl ............................. 38
Manuelle Einstellung .......................... 38
I-Route ................................................ 39
Program .............................................. 39
Watt-Einstellung ................................. 39
Kardio-Einstellung .............................. 39
Stop Training ...................................... 39
Trainingszusammenfassun ................ 40
REINIGUNG UND WARTUNG ........... 40
TRANSPORT UND LAGERUNG ....... 41
GARANTIE ......................................... 41
HAFTUNGSAUSSCHLUSS ............... 41
PURE 4.1
•
Diese deutsche Bedienungsanleitung ist
eine Übersetzung des englischen Textes.
Es können keine Rechte auf diese
Betriebsanleitung
Übersetzung abgeleitet werden.
Index
Deutsch
Willkommen
Willkommen in der Welt von Tunturi New
Fitness!
Vielen Dank, dass Sie dieses Gerät von
Tunturi erworben haben. Tunturi bietet
eine breite Palette an professionellen
Fitnessgeräten wie beispielsweise
Crosstrainern, Laufbändern,
Trainingsfahrrädern, Rudergeräten und
Vibrationsplatten. Die Tunturi Geräte
sind für die ganze Familie geeignet
- ganz egal, wie fit man ist. Weitere
Informationen finden Sie auf unserer
Website unter www.tunturi.com
Warnhinweise zur
Sicherheit
WARNUNG
Lesen Sie die Warnhinweise zur
Sicherheit und die Anweisungen.
Werden die Warnhinweise zur Sicherheit
und die Anweisungen nicht befolgt,
kann dies zu Personenverletzungen und
Schäden am Gerät führen. Bewahren
Sie die Warnhinweise zur Sicherheit
und die Anweisungen zur künftigen
Bezugnahme auf.
WARNUNG
Herzfrequenz-Überwachungssysteme
können ungenau sein. Eine
Überanstrengung kann zu schweren
Schädigungen oder zum Tod führen.
Wenn Sie sich schwach oder
ohnmächtig fühlen, stellen Sie die
Übungen unverzüglich ein.
• Das Gerät ist nur für den Heim-
und gewerblichen Gebrauch (z.B.
Krankenhäuser, Feuerwachen,
Hotels, Schulen, usw.) geeignet.
Die maximale Verwendung ist auf
6 Stunden pro Tag beschränkt.
Das Gerät ist nicht für den
ausschließlichen gewerblichen
Einsatz (z.B. große Fitnessstudios)
geeignet.
22
Betriebsanleitung • PURE 4.1
D
• Wenn dieses Gerät von Kindern
oder Personen mit körperlicher,
sensorischer, geistiger oder
motorischer Behinderung verwendet
wird, oder wenn nicht genügend
Erfahrung und Kenntnisse
vorhanden sind, kann dies zu
Gefahrensituationen führen.
Personen, die für deren Sicherheit
verantwortlich sind, müssen klare
Anweisungen geben oder den
Gebrauch des Geräts beaufsichtigen.
• Bevor Sie Ihr Training starten,
nehmen Sie Kontakt mit einem Arzt
auf, um Ihre Gesundheit kontrollieren
zu lassen.
• Falls Sie Übelkeit, ein
Schwindelgefühl oder andere
anormale Symptome verspüren,
hören Sie unverzüglich mit Ihrem
Training auf und wenden Sie sich an
einen Arzt.
• Um einen Muskelkater zu vermeiden,
starten Sie jedes Training mit
Aufwärmen und beenden Sie es mit
Abkühlen. Denken Sie daran, sich
am Ende des Trainings zu dehnen.
• Das Gerät ist nur für den Gebrauch
in geschlossenen Räumen geeignet.
Das Gerät ist nicht für den Gebrauch
im Freien geeignet.
• Verwenden Sie das Gerät nur in
Umgebungen mit ausreichender
Belüftung. Verwenden Sie das Gerät
nicht in zugiger Umgebung, damit Sie
sich nicht erkälten.
• Verwenden Sie das Gerät
nur in Umgebungen mit
Umgebungstemperaturen zwischen
10 °C und 35 °C. Lagern Sie das
Gerät nur in Umgebungen mit einer
Umgebungstemperatur zwischen 5
°C und 45 °C.
• Verwenden und lagern Sie das Gerät
nicht in feuchten Umgebungen. Die
Luftfeuchtigkeit darf niemals 80%
überschreiten.
• Verwenden Sie das Gerät nur
bestimmungsgemäß. Verwenden Sie
das Gerät nicht für einen anderen
als für den in diesem Handbuch
beschriebenen Zweck.
• Verwenden Sie das Gerät nicht, falls
Teile beschädigt oder defekt sind.
Ist ein Teil beschädigt oder defekt,
wenden Sie sich an Ihren Händler.
• Halten Sie Ihre Hände, Füße
und andere Körperteile von den
beweglichen Teilen fern.
• Halten Sie Ihr Haar von den
beweglichen Teilen fern.
• Tragen Sie entsprechende Kleidung
und Schuhe.
• Halten Sie Kleidung, Schmuck
und andere Gegenstände von den
beweglichen Teilen fern.
• Vergewissern Sie sich, dass das
Gerät nur von einer Person auf
einmal verwendet wird. Das Gerät
darf nicht von Personen verwendet
werden, deren Gewicht 150 kg (330
lbs) überschreitet.
• Öffnen Sie das Gerät nicht, ohne
vorher mit Ihrem Händler zu
sprechen.
Elektrische Sicherheit
(betrifft nur elektrisch betriebene Geräte)
• Vergewissern Sie sich vor der
Verwendung stets, dass die
Netzspannung mit der Spannung
auf dem Typenschild des Geräts
übereinstimmt.
• Verwenden Sie kein
Verlängerungskabel.
• Halten Sie das Netzkabel von Hitze,
Öl und scharfen Kanten fern.
• Verändern Sie nichts am Netzkabel
oder am Netzstecker
• Verwenden Sie das Gerät nicht, falls
das Netzkabel oder der Netzstecker
• beschädigt oder defekt ist. Ist das
Netzkabel oder der Netzstecker
beschädigt oder defekt, wenden Sie
sich an Ihren Händler.
• Wickeln Sie das Netzkabel immer
vollständig ab.
• Lassen Sie das Netzkabel nicht unter
dem Gerät entlanglaufen. Lassen
Sie das Netzkabel nicht unter einem
Teppich entlanglaufen. Stellen
Sie keine Gegenstände auf das
Netzkabel.
• Vergewissern Sie sich, dass das
Netzkabel nicht über der Kante eines
Tisches hängt. Vergewissern Sie
sich, dass niemand versehentlich
über das Netzkabel stolpert.
23
• Lassen Sie das Gerät nicht
unbeaufsichtigt, wenn der
Netzstecker in die Wandsteckdose
eingesteckt ist.
• Ziehen Sie nicht am Netzkabel,
um den Netzstecker aus der
Wandsteckdose zu ziehen.
• Ziehen Sie den Netzstecker aus
der Wandsteckdose, wenn das
Gerät nicht verwendet wird, bevor
es zusammengebaut oder zerlegt
wird sowie vor der Reinigung und
Wartung.
Zusammenbau
Verpackungsinhalt
Hardware kit
Die Verpackung enthält die
Befestigungsteile gemäß Bild. Siehe
Abschnitt “Beschreibung”.
Fehlt ein Teil, wenden Sie sich an Ihren
Händler.
Allgemeine zusammenbau
Die Verpackung enthält die in Bild
dargestellten Teile.
WARNUNG
• Bauen Sie das Gerät in der
angegebenen Reihenfolge
zusammen.
• Tragen und bewegen Sie das Gerät
mit mindestens zwei Personen.
VORISCHT
• Stellen Sie das Gerät auf festen,
ebenen Boden.
• Stellen Sie das Gerät auf eine
schützende Unterlage, um Schäden
am Bodenbelag zu vermeiden.
• Sorgen Sie rund um das Gerät für
einen Freiraum von mindestens 100
cm.
Fehlt ein Teil, wenden Sie sich an Ihren
Händler
PURE 4.1
•
Betriebsanleitung
24
Der richtige Zusammenbau des Geräts
geht aus den Abbildungen hervor.
Betriebsanleitung • PURE 4.1
D
Montageschritte
Montageschritt A
• Montiere die Polster zur
Höhenanpassung des fordern
Stabilisator
• Montiere den fordere Stabilisator
mithilfe der gezeigten Hardware.
Bemerkung:
Platziere an erster Stelle alle Schrauben/
Bolzen an der richtigen Stelle bevor
diese vollständig zu befestigen.
Montageschritt C
• Montiere die Polster zur
Höhenanpassung auf der
U-Förmigen schiene.
• Montiere die U-Förmige schiene mit
dem hinteren Stabilisator. .
Bemerkung:
Montiere die 4 Bolzen erst handfest
bevor diese nachzuziehen
Montageschritt D
Montageschritt B
• Montiere die Polster zur
Höhenanpassung des fordern
Stabilisator
• Montiere den hinteren Stabilisator
mithilfe der gezeigten Hardware.
Bemerkung:
Platziere an erster Stelle alle Schrauben/
Bolzen an der richtigen Stelle bevor
diese vollständig zu befestigen.
• Verbinden Sie die Kabel vom Upright
Tube und Main Frame bevor sie den
Upright Tube in Position schieben..
Bemerkung:
Entfernen sie die Schauben nicht aus
dem Frame bevor der Upright Tube in
Position geschoben ist..
• Verwenden Sie den beilegenden
Inbus-Schlüssel um die Schrauben,
durch die Löcher (von Innen nach
Außen) zu befestigen.
• Ziehen Sie die
Befestigungsschrauben an - drehen
im Uhrzeigersinn.
Bemerkung:
Ziehe die 6 Bolzen erst handfest
bevor diese Nachgezogen werden um
Schiefstellung zu vermeiden.
25
Montageschritt E
• Stabilisiere den Upright-Tube wie
gezeigt in der Abbildung.
Montageschritt F
• Ziehen sie die Hand-Pulse wires aus
der Handle bar und da Date-Cable
aus dem Upright-Tube vorsichtig
durch die Öffnung im KonsoleBracket.
• Entferne die 4 Montage-Schrauben
aus der Rückseite der Konsole.
• Schließe die Hand-Pulse wire und
das Data-Cable an, an der Konsole.
• Befestige die Konsole am KonsoleBracket.
Bemerkung:
Vermeiden Sie Beschädigung der Kabel
während der Montage.
Montageschritt H
PURE 4.1
•
• Befestige die Fixed Handle bar Tubes
wie gezeigt in der Abbildung.
Bemerkung:
Platziere an erster Stelle alle Schrauben/
Bolzen an der richtigen Stelle bevor
diese vollständig zu befestigen.
Montageschritt G
• Schieben Sie den Metall-Shaft
durch das Innenlager-Gehäuse des
linken Armes. Schließen Sie jetzt
den linken Arm an am vorderen
Rahmenrohr durch den MetallShaft durch die Öffnung im Rohr zu
drücken. Drücken Sie den rechten
Arm auf den Shaft und befestige
diesen mit den Unterlegscheiben und
Schraube an den beiden Enden der
Shaft . Ziehen Sie die Arme mit zwei
Inbus-Schlüssel
Remark:
Eine dicke shim-Unterlegscheibe ist
zwischen den Swivel-Arm und den Front
Frame-Tube.
• Montiere den Flaschenhalter an der
Upright-Tube.
Betriebsanleitung
26
Betriebsanleitung • PURE 4.1
D
Montageschritt I
• Montiere den Upper Moving handle
bar wie auf der Abbildung gezeigt
wird.
Montageschritt J
Montageschritt K
• Montiere den Foot-Rest am Linken
Outer-Pedal Post wie gezeigt in der
Abbildung. Der Linke Outer-Pedal P
ist markiert mit einem “L” .
Bemerkung:
Platziere an erster Stelle alle Schrauben/
Bolzen an der richtigen Stelle bevor
diese vollständig zu befestigen.
• Montiere beide Fixed Pedal Posts
und beide Crank-Arm, wie gezeigt in
der Abbildung.
Bemerkung:
Pedal Posts sind markiert mit “L” und
“R”.
L = Linke Seite - Pedal Post
R = Rechte Seite - Pedal Post
Montageschritt L
• Montiere den Foot-Rest am rechten
Outer-Pedal Post wie gezeigt in der
Abbildung. Der rechte Outer-Pedal P
ist markiert mit einem “R”.
Bemerkung:
Platziere an erster Stelle alle Schrauben/
Bolzen an der richtigen Stelle bevor
diese vollständig zu befestigen.
27
Loading...