Tripp-Lite SU8000RT4U Catalog Page

SmartOnline 208/240 & 120V 8kVA 5.6kW

Highlights

8000VA / 8kVA / 5600W on-line

double-conversion UPS

208/120V or 240/120V +/-3%

output at 60Hz

Included maintenance bypass

switch enables live replacement

of UPS with zero downtime

4U Rack/Tower compatible,

Hot-swap power and battery

modules

USB, RS232 & EPO ports,

Network management card

options

Front panel LEDs with detailed

LCD monitoring and control

screen

Expandable runtime with optional

external battery packs

Hardwire input (4 wire), L6-30R,

L6-20R, 5-15/20R & Hardwire

outputs

Package Includes

SU8000RT4U Smart Online UPS

SUPDM8K Detachable PDU with

Manual Bypass Switch

PowerAlert software and

complete cabling

4 post rackmount installation

brackets

Double-Conversion UPS, 4U Rack/Tower, Extended
Run, Network Card Options, USB, DB9, Bypass
Switch

MODEL NUMBER: SU8000RT4U

Description

Tripp Lite 8kVA SmartOnline Hot-Swappable Modular Rack/Tower UPS offers 8000VA on-line,

double-conversion UPS support for server, network and telecommunications equipment. Maintains

battery-derived AC output during blackouts with active, full-time power conditioning. Fault-tolerant auto-bypass

prevents unexpected service interruptions during overload or internal fault conditions. Single all-in-one housing

installs in 4 rack spaces(4U). Upright tower and two post rackmount installation supported with optional

accessories. Maintains full-time sine wave output within 3% of selectable 208/120 or 240/120V AC. Corrects

brownouts and overvoltages from 65V to 140V(L-N). Expandable runtime with optional external battery packs.

Converts raw input from AC to DC, then resynthesizes output power back to perfect sine wave AC output with

enhanced protection from harmonic distortion, fast electrical impulses and other hard-to-solve power problems

not addressed by other UPS types. Highly efficient operation in optional economy mode setting, saving BTU heat

output and energy costs. Network-grade AC surge and noise suppression. Network management interfaces include combination DB9 RS-232 enabled and dry

contact serial port, enhanced USB port and slot for network management card options, such as Tripp Lite's SNMPWEBCARD network interface.

HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Supports

simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces. Includes PowerAlert

monitoring software and complete cabling. Supports Emergency Power Off(EPO) via built-in interface. Front panel LEDs and LCD readout with scroll controls

support visual monitoring of all major UPS functions. LED/LCD display panel easily rotates for viewing in rackmount or tower configurations. Split phase 4

conductor hardwire input. UPS supported outlets include two L6-30R, two L6-20R and 4 low voltage 5-15/20R. Hardwire output is also supported. Hardwire

connections and outlets are mounted on a detachable backplate with manual bypass switch to enable hot-swappable UPS replacement without powering off

connected equipment. Internal batteries and optional external battery packs are field replaceable and hot swappable. Attractive all-black color

scheme.$250,000 Ultimate Lifetime Insurance(U.S., Canada, and Puerto Rico only).

Features

True online, double-conversion UPS provides pure, full-time sine wave AC output free of surges, voltage fluctuations and line noise

8000VA/5600 watt output power capacity with dual voltage output of 208/120 or 240/120V

4U all-in-one high power density housing supports rackmount installation in only 4 rack spaces

Dual conversion UPS actively converts raw input from AC to DC, then back to perfect sine wave AC output with enhanced protection from harmonic

distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types

Hardwire input/output connections and output receptacles are mounted on a detachable backplate with manual bypass switch to enable hot-swappable

UPS replacement without powering off connected equipment

Provides perfectly regulated, sine wave output power free of line noise, transient surges and frequency variation for the most efficient operation of critical

servers, networking and telecommunications equipment

Maintains output within 3% of selected 208/120 or 240/120V nominal voltage during brownouts and overvoltages

Supports connected equipment during blackouts for 12/5 minutes at half/full load levels, runtime is further expandable with optional external battery packs

Intelligent battery management system extends battery life

Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software(see manual)

Network interfaces support simultaneous communications via DB9 port, USB port and slot for network management card options, such as Tripp Lite's

SNMPWEBCARD network interface

DB9 port supports RS-232 and dry contact messaging. HID-compliant USB interface enables integration with built-in power management and auto

shutdown features of Windows and Mac OS X.

Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number

of additional servers over IP

Communications ports support on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery

capacity, AC line frequency, timed inverter shutoff, activate self-test and output power control

Built-in Emergency Power Off(EPO) interface with cable

Includes hardwire output and 8 output receptacles(2 L6-30R, 2 L6-20R, 4 NEMA 5-15/20R), all of which are available for simultaneous use

Split phase, 4 conductor hardwire connection(featured on included detachable PDU).

Front panel LEDs and LCD readout with scroll button enables visual confirmation of all major UPS functions and current site electrical conditions

Front panel switches enable power on/off control, self-test and alarm cancel functions

Included adjustable mounting rails support installation in 4 post 19 inch rack enclosures

Optional 2-9USTAND set of tower stands supports upright tower installation

Optional 2POSTRMKITHD accessory enables 2 post rackmount installation

Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions

$250,000 Ultimate Lifetime Insurance(U.S., Canada, and Puerto Rico only)

Specifications

OUTPUT

Output Volt Amp Capacity (VA) 8000

Output kVA Capacity (kVA) 8

Output Watt Capacity (Watts) 5600

Output kW Capacity (kW) 5.6

Output Capacity Details

Power Factor 0.7

8,000VA / 5600W (240V), 7200VA / 5600W (208V); Supports up to 105% load continuously in double conversion
mode, 106 to 125% for 3 minutes, 126 to 150% for 30 seconds; Loads over 150% trigger immediate bypass mode
operation to support equipment directly from mains power; Double conversion mode is automatically restored as
the overload is cleared