Tripp Lite SU8000RT3UG User Manual

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +[phone]

E-mail: [e-mail]

Model #: SU8000RT3UG

SmartOnline Expandable Rack/Tower UPS System - Online, double-conversion protection for mission-critical
applications

Highlights

Global 8000VA (8kVA) on-line 6U rack/tower UPS with expandable runtime

(3U power module + 3U battery pack)

Zero transfer time, on-line, double-conversion and economy-mode operation

supported

Detachable PDU with manual bypass switch enables hot-swap UPS

replacement without powering off connected loads

200, 208, 230 or 240V selectable input/output voltage, with hardwire input and

six individually breakered C19 outlets

2% output voltage regulation over an input voltage range of 156 to 296

Simultaneous-use RS232 and contact closure monitoring ports, SNMP/Web

Card Slot and EPO interfaces

$250,000 Ultimate LIfetime Insurance (USA, Puerto Rico & Canada only)

Description

Global 8000VA (8kVA) on-line, double-conversion UPS system for critical server, network and telecommunications equipment. Installs in only 6 rack

spaces (3U power module and 3U battery pack). Worldwide shipping version with 6 C19 outlets. Maximum installed rack depth of 32.5 in.

Expandable battery runtime with optional external battery packs. Full-time sine wave 200, 208, 220, 230, or 240V +/-2% output. Actively converts

raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. Operates continuously without using battery

power during brownouts to 156V and overvoltages to 276V. Standard 3-wire 208V hardwire input connection; 6 individually breakered C19

output receptacles. Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without disrupting power to

connected equipment. Network-grade AC surge and noise suppression. Zero transfer time between AC and battery operation. Network management

interfaces support communications via RS-232, contact-closure port and optional SNMPWEBCARD slot. Supports detailed monitoring of equipment

load levels, self-test data and utility power conditions via network interfaces. Includes PowerAlert monitoring software and complete cabling.

Emergency Power Off (EPO) interface. Front panel LEDs offer at-a-glance confirmation of line power status, battery power status, AC-to-DC

conversion, DC-to-AC conversion, bypass mode and output power status. LCD panel with scroll buttons offers detailed diagnostic test information at

startup and during self tests, plus real-time data on input and output voltage, frequency (Hz), load percentage and battery charge level. LED/LCD

display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm. Self-test. Fault-tolerant auto-bypass mode. 4-post

rackmount accessories and 2-9USTAND tower kit included; 2POSTRMKITWM 2-post rackmount hardware accessories available. Field replaceable,

hot-swappable power module and external battery packs. Attractive all-black color scheme. 2-year warranty and $250,000 connected equipment

insurance; extended warranty and service contracts available.

Applications

Ideal for protection of sensitive electronics in any application calling for upright tower or 19 inch rackmount UPS protection. Common
applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems

Global C19 outlet configuration allows a single UPS model to be specified for worldwide use.

Package Includes

3U power module with detachable hot-swap PDU input/output panel and bypass switch
3U external battery pack
Two sets of 4 post rackmount rails (one for each of the 3U components)
One set of tower stands for upright tower configuration
PowerAlert software, complete data cabling, user manual with warranty information

Features

Global 8,000 VA (8kVA) on-line, double-conversion UPS system (High voltage input/High voltage output)
Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without powering off connected
equipment
Installs in only 6 rack spaces (3U power module/3U battery pack) with a maximum installed depth of 32.5 inches
Offers 6 min. runtime at full load (8000VA/6400W) and 15 min. at half load (4000VA/3200W). Runtime is expandable with any number of
optional external battery packs
Full-time sine wave 200, 208, 220, 230, or 240V +/-2% output (user selectable)
Actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output
Operates continuously without using battery power during brownouts to 156V and overvoltages to 276V
Standard 3-wire 208V hardwire input connection
6 individually breakered C19 outlets
Detailed LCD panel with scroll buttons offers detailed diagnostic test information on startup and during self tests, plus real-time data on input
and output voltage, frequency (Hz), load percentage, battery charge level and more
Network-grade AC surge and noise suppression
Zero transfer time between AC and battery operation
Network management interfaces support communications via RS-232, contact-closure port and optional SNMPWEBCARD slot
Supports detailed monitoring of equipment load levels, self-test data and mains power conditions via network interfaces. Includes
PowerAlert monitoring software and complete cabling
Emergency Power Off (EPO) interface
Front panel LEDs offer at-a-glance confirmation of line power status, battery power status, AC-to-DC & DC-to-AC conversion, bypass mode
and output power status.
Fault-tolerant auto-bypass mode prevents loss of output during UPS fault conditions or excessive UPS loading
4-post rackmount and upright tower installation accessories included. 2POSTRMKITWM two post rackmount hardware accessories
available
Field replaceable, hot swappable power module and external battery packs
Attractive all-black color scheme
2-year warranty; $250,000 connected equipment insurance
Extended warranty and service contracts available

Specifications

SYSTEM OVERVIEW

Voltage compatibility 208V AC (200/208/220/230/240V)

Frequency
compatibility

50/60 Hz

OUTPUT

Output VA 8000

Output watts 6400

Output nominal
voltage

208V AC (200/208/220/230/240V)

Output voltage
regulation

Maintains pure sine wave output at all times, regulated within 2% of selected nominal output voltage, less than 3% total
harmonic distortion when used with computer loads

Output frequency
regulation

Regulates line frequency to 50/60Hz +/- 0.05Hz

Outlet quantity / type 6 individually breakered C19 outlets