Tripp Lite SU8000RT3U User Manual

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +[phone]

E-mail: [e-mail]

Model #: SU8000RT3U

SmartOnline Expandable Rack/Tower UPS System - Online, double-conversion protection for mission-critical
applications

Highlights

8000VA (8kVA) on-line 6U rack/tower UPS with expandable runtime (3U

power module + 3U battery pack)

Detachable PDU with manual bypass switch enables hot-swap UPS

replacement without powering off connected loads

200/208/230/240V selectable input/output voltage

2% output voltage regulation over an input voltage range of 156V to 276V

Enhanced serial communications ports, SNMP/Web Card Slot and EPO

interfaces

$250,000 Ultimate LIfetime Insurance (USA & Canada only).

Description

8000VA (8kVA) on-line, double-conversion UPS system for critical server, network and telecommunications equipment. Installs in only 6 rack

spaces (3U power module and 3U battery pack). Maximum installed rack depth of 32.5 in. Expandable battery runtime with optional external battery

packs. Full-time sine wave 200, 208, 220, 230, or 240V +/-2% output. Actively converts raw incoming AC power to DC, then re-converts output back

to completely regulated, filtered AC output. Operates continuously without using battery power during brownouts to 156V and overvoltages to 276V.

Standard 3-wire 208V hardwire input connection; NEMA L6-30R and L6-20R output receptacles. Detachable input-output PDU module with manual

bypass switch enables hot-swap UPS replacement without disrupting power to connected equipment. Highly efficient operation in optional economy

mode setting, saving BTU heat output and energy costs. Network-grade AC surge and noise suppression. Zero transfer time between AC and

battery operation. Network management interfaces support communications via RS-232, contact-closure port and optional SNMPWEBCARD slot.

Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via network interfaces. Includes PowerAlert

monitoring software and complete cabling. Emergency Power Off (EPO) interface. Front panel LEDs offer at-a-glance confirmation of line power

status, battery power status, AC-to-DC conversion, DC-to-AC conversion, bypass mode and output power status. LCD panel with scroll buttons

offers detailed diagnostic test information at startup and during self tests, plus real-time data on input and output voltage, frequency (Hz), load

percentage and battery charge level. LED/LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm.

Self-test. Fault-tolerant auto-bypass mode. 4-post rackmount accessories and 2-9USTAND tower kit included; 2POSTRMKITWM 2-post rackmount

hardware accessories available. Field replaceable, hot-swappable power module and external battery packs. Attractive all-black color scheme.

2-year warranty and $250,000 connected equipment insurance; extended warranty and service contracts available.

Applications

Ideal for protection of sensitive electronics in any application calling for upright tower or 19 inch rackmount UPS protection. Common
applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems

Package Includes

3U power module with detachable hot-swap PDU input/output panel and bypass switch
3U external battery pack
Two sets of 4 post rackmount rails (one for each of the 3U components)

One set of tower stands for upright tower configuration
PowerAlert software, complete data cabling, user manual with warranty information

Features

8,000 VA (8kVA) on-line, double-conversion UPS system (High voltage input/High voltage output)
Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without powering off connected
equipment
Installs in only 6 rack spaces (3U power module/3U battery pack) with a maximum installed depth of 32.5 inches
Offers 6 min. runtime at full load (8000VA/6400W) and 15 min. at half load (4000VA/3200W). Runtime is expandable with any number of
optional external battery packs
Full-time sine wave 200, 208, 220, 230, or 240V +/-2% output (user selectable)
Actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output
Operates continuously without using battery power during brownouts to 156V and overvoltages to 276V
Standard 3-wire 208V hardwire input connection
2 x NEMA L6-30R and 4 x L6-20R output receptacles
Detailed LCD panel with scroll buttons offers detailed diagnostic test information on startup and during self tests, plus real-time data on input
and output voltage, frequency (Hz), load percentage, battery charge level and more
Network-grade AC surge and noise suppression
Zero transfer time between AC and battery operation
Network management interfaces support communications via RS-232, contact-closure port and optional SNMPWEBCARD slot
Supports detailed monitoring of equipment load levels, self-test data and mains power conditions via network interfaces. Includes
PowerAlert monitoring software and complete cabling
Emergency Power Off (EPO) interface
Front panel LEDs offer at-a-glance confirmation of line power status, battery power status, AC-to-DC & DC-to-AC conversion, bypass mode
and output power status.
Fault-tolerant auto-bypass mode prevents loss of output during UPS fault conditions or excessive UPS loading
4-post rackmount and upright tower installation accessories included. 2POSTRMKITWM two post rackmount hardware accessories
available
Field replaceable, hot swappable power module and external battery packs
Attractive all-black color scheme
2-year warranty; $250,000 connected equipment insurance
Extended warranty and service contracts available

Specifications

SYSTEM OVERVIEW

Voltage compatibility 208V AC (200/208/220/230/240V)

Frequency
compatibility

50/60 Hz

OUTPUT

Output VA 8000

Output watts 6400

Output nominal
voltage

208V AC (200/208/220/230/240V)

Output voltage
regulation

Maintains pure sine wave output at all times, regulated within 2% of selected nominal output voltage, less than 3% total
harmonic distortion when used with computer loads

Output frequency
regulation

Regulates line frequency to 50/60Hz +/- 0.05Hz

Outlet quantity / type 4 x NEMA L6-20R, 2 x NEMA L6-30R

INPUT

Maximum input amps 200V - 38A / 208V - 36A / 220V - 34A / 230V - 33A / 240V - 32A

Input connection type Hardwire

BATTERY

Full load runtime 6 min. (8000VA/6400W)