Tripp Lite SU6000RT4UHV User Manual

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +[phone]

E-mail: [e-mail]

Model #: SU6000RT4UHV

SmartOnline 6kVA On-Line Double-Conversion UPS, 4U Rack/Tower, 200-240V NEMA outlets

Highlights

Completely user hot-swappable—no service call or technician needed

Protects rackmount servers, telecom systems and other networking

equipment in high-voltage environments with true on-line operation, pure sine

wave output and zero transfer time

4 AC outlets (2 L6-20R; 2 L6-30R) with 200/208/220/230/240V 50/60Hz output

6kVA/5400W capacity in 4U form factor with power module and independent,

detachable PDU

Hot-swappable power and battery modules

8.5-minute half-load runtime, 2-minute full-load; expandable runtime with

external battery packs

Front panel LEDs with detailed LCD monitoring and control screen

USB, RS232 and SNMP communication ports with included PowerAlert

software for complete network power management and control

$250,000 Ultimate Lifetime Insurance; 2-year warranty

Description

Featuring true on-line operation with pure sine wave output, zero transfer time to battery and complete UPS replacement capability with no
downtime, the SU6000RT4UHV provides the highest level of protection available for mission-critical equipment from power outages, voltage
fluctuations and transient surges. It converts incoming AC power to DC, and re-converts it back to filtered AC output with a pure sine wave, isolating
connected components from all power problems in high-voltage environments. The SU6000RT4UHV has a 6kVA/5400W capacity and 4 AC outlets
(2 L6-20R; 2 L6-30R).

With its detachable PDU, the SU6000RT4UHV is easily hot-swappable by a user of any skill set—no need for lengthy and expensive service calls,
and no downtime if a repair or battery replacement is needed. In bypass mode, the PDU passes power to equipment without the use of the power
and battery modules, allowing them to be removed while keeping your application in operation.

UPS battery backup keeps connected equipment operational through short power failures, and provides time to save data and perform an orderly
system shutdown in case of a prolonged blackout. The SU6000RT4UHV‘s runtime can be expanded with optional external battery packs.

The SU6000RT4UHV features a highly efficient (96%) economy mode setting that can significantly reduce a facility's energy costs by minimizing
heat output, reducing cooling requirements and consuming less electricity.

An LCD display with LED indicators enables IT personnel to monitor operating modes and conditions. The LCD/LED panel rotates for viewing in
horizontal rack or vertical tower installations and includes an audible alarm that signals various conditions.

The SU6000RT4UHV features a USB port and a DB9 port that, when used with Tripp Lite's included PowerAlert software, provide comprehensive
network power monitoring and control. An optional SNMPWEBCARD accessory can enable the UPS to operate as an IP managed device.

The unit requires only 4U of rack space in a standard rack enclosure and can be installed in a 2-post rack using the 2POSTRMKITHD accessory, or
in a tower configuration with the 2-9USTAND accessory.

The SU6000RT4UHV comes with $250,000 Ultimate Lifetime Insurance coverage for connected equipment and a 2-year warranty.

Features

Tripp Lite SU6000RT4UHV 6000VA / 6kVA / 5400 watt online, double-conversion UPS system in a single 4U rack/tower compatible housing
(at 208V nominal, output is limited to 4992 watts)
Full-time active power conditioning maintains clean, continuous dual-conversion AC output free of voltage fluctuations, power interruptions
and line noise
Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions
Detachable back panel PDU contains input line cord connection and output receptacles, plus manual bypass switch to support

hot-swappable whole UPS replacement with no interruption to connected equipment
L6-30P input plug; two L6-30R and two L6-20R outlets
Included rail kit supports 4U 19 inch rackmount installation in 4 post racks
Optional 2POSTRMKITHD supports installation in 2 post 19 inch racks (1 required for SU6000RT4UHV)
Optional 2-9USTAND supports upright tower placement (1 required for SU6000RT4UHV)
Maximum installed rack depth of only 20.7 in. / 52.6cm
Maintains full-time sine wave output within 2% of selected 200/208/220/230/240V nominal in double conversion mode
Corrects brownouts to 156V at full load (100V at 50% load or less)
Corrects overvoltages to 290V at full load (300V at 90% load or less)
Supports 50/60Hz operation for worldwide frequency compatibility
Double-conversion operation offers full-time AC to DC, then DC to AC conversion to maintain perfectly regulated sine wave AC output with
enhanced protection from harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS
types
High efficiency ECONOMY MODE operation significantly reduces BTU heat output and operating energy costs
Network-grade AC surge and noise suppression
Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via built-in RS-232, USB and optional
SNMP card slot interfaces
UPS card slot supports one card-based network interface option (part # SNMPWEBCARD) or dry-contact monitoring accessory (part #
RELAYIOCARD)
Optional SNMPWEBCARD offers communications and control via secure remote web and network interfaces
Optional RELAYIOCARD supports six configurable hard contact closure outputs for custom event notification
Optional RELAYIOMINI interface module offers three configurable hard contact closure outputs for custom event notification (requires
removal of USB interface module)
HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
Includes Free PowerAlert monitoring software packages; PowerAlert LOCAL for desktops and small business networks, PowerAlert NSA
(Network Shutdown Agent) for larger networks and PowerAlert NMS (Network Management System) for monitoring up to 250
SNMP-enabled UPS, PDU and other networking devices
Front panel LEDs and LCD readout with scroll controls support front-panel visual monitoring of all major UPS functions with support for a
variety of control options to support advanced UPS settings and configurations
LED/LCD display panel rotates for viewing in rackmount or tower configurations
Supports Emergency Power Off (EPO) via built-in interface
Battery independent restart ensures automatic UPS power-up without user interaction after lengthy power outages, even when batteries
are expired and require replacement
BP192V12-3U external battery packs are field replaceable and hot swappable
Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)
Frequency conversion mode enables conversion of 60Hz to 50Hz or 60Hz to 50Hz (no de-rating)

Specifications

OUTPUT

Output Volt Amp
Capacity (VA)

6000

Output kVA capacity
(kVA)

6.0

Output Watt Capacity
(watts)

5400

Output kW capacity 5.4

Output power factor 0.9

Output Capacity
Details

Output capacity de-rates to 4992 watts when used at 208V nominal

Crest Factor 3:1

Nominal Output
Voltage(s) Supported

200V; 208V; 220V; 230V; 240V

Frequency
compatibility

50/60 Hz (auto-selectable)

Frequency
compatibility details

Output frequency matches input nominal on startup; Frequency conversion mode enables conversion of 60Hz to
50Hz or 50Hz to 60Hz (no de-rating)

Output voltage
regulation (line mode)

+/- 2%

Output voltage
regulation (Economy
line mode)

+/- 10%

Output voltage
regulation (Battery
mode)

+/- 2%

Built-in UPS output
receptacles

2 L6-20R outlet(s); 2 L6-30R outlet(s)

Output receptacle
details

Output receptacles and input line cord are mounted on a detachable PDU backplate with bypass switch to enable
hot-swappable power module replacement

Output circuit breaker 20A breaker protects L6-20R outlets, L6-30R outlets are unbreakered

Output AC waveform
(AC mode)

Pure Sine wave

Output AC waveform
(battery mode)

Pure Sine wave

INPUT

Rated input current
(at maximum load)

31.9A (200V), 30.6A (208V), 29A (220V), 27.7A (230V), 26.6A (240V)

Nominal Input
Voltage(s) Supported

200V AC; 208V AC; 220V AC; 230V AC; 240V AC

Nominal input
voltage description

Factory configured to 208V

UPS input
connection type

L6-30P

UPS Input cord
length (ft.)

10

UPS Input cord
length (m)

3

Recommended
Electrical Service

30A

BATTERY

Full load runtime
(minutes)

2 minutes (5400 watts)

Half load runtime
(minutes)

8.5 minutes (2700 watts)

Expandable battery
runtime

Runtime is expandable with external battery packs

External battery pack
compatibility

BP192V12-3U; BP192V557C-1PH; BP192V787C-1PH; BP192V1037C-1PH; BP192V1407C-1PH

DC system voltage
(VDC)

192