Tripp-Lite SU6000RT4U Catalog Page

SmartOnline 208/240 & 120V 6kVA 4.2kW

Highlights

Completely user

hot-swappable—no service call

or technician needed

Included maintenance bypass

switch enables live replacement

of UPS with zero downtime

Protects rackmount servers,

telecom systems and other

networking equipment with true

on-line operation, pure sine wave

output and zero transfer time to

battery

12 AC outlets (8 5-15/20R; 2

L6-20R; 2 L6-30R)

6kVA/4200W capacity in 4U form

factor with power module and

independent, detachable PDU

Hot-swappable power and

battery modules

20-minute half-load runtime,

8-minute full-load; expandable

runtime with external battery

packs

Front panel LEDs with detailed

LCD monitoring and control

screen

USB, RS232 and SNMP

communication ports with

included PowerAlert software for

complete network power

management and control

$250,000 Ultimate Lifetime

Insurance (U.S., Canada, and

Puerto Rico only)

Package Includes

SU6000RT4U UPS System (with

SUPDMB56 detachable PDU

module)

USB, DB9 and EPO cabling

Rackmount installation kit for 4

post rack enclosures

Owner's manual and warranty

information

Double-Conversion UPS, 4U Rack/Tower, Extended
Run, Network Card Options, USB, DB9 Serial,
Bypass Switch

MODEL NUMBER: SU6000RT4U

Description

Featuring true on-line operation with pure sine wave output, zero transfer time to battery and complete UPS

replacement capability with no downtime, the SU6000RT4U provides the highest level of protection available for

mission-critical equipment from power outages, voltage fluctuations and transient surges. It converts incoming

AC power to DC, and re-converts it back to filtered AC output with a pure sine wave, isolating connected

components from all power problems. The SU6000RT4U has a 6kVA/4200W capacity, NEMA L14-30P 4-wire

split-phase input and 12 total AC outlets(8 5-15/20R; 2 L6-20R; 2 L6-30R).

With its detachable PDU, the SU6000RT4U is easily hot-swappable by a user of any skill set—no need for

lengthy and expensive service calls, and no downtime if a repair or battery replacement is needed. In bypass

mode, the PDU passes power to equipment without the use of the power and battery modules, allowing them to

be removed while keeping your application in operation.

UPS battery backup keeps connected equipment operational through short power failures, and provides time to

save data and perform an orderly system shutdown in case of a prolonged blackout. The SU6000RT4U’s

runtime can be expanded with optional external battery packs.

The SU6000RT4U features a highly efficient(94%) economy mode setting that can significantly reduce a

facility's energy costs by minimizing heat output, reducing cooling requirements and consuming less electricity.

An LCD display with LED indicators enables IT personnel to monitor operating modes and conditions. The

LCD/LED panel rotates for viewing in horizontal rack or vertical tower installations and includes an audible alarm

that signals various conditions.

The SU6000RT4U features a USB port and a DB9 port that, when used with Tripp Lite's included PowerAlert

software, provide comprehensive network power monitoring and control. An optional network accessory card, such as Tripp Lite's SNMPWEBCARD accessory,

enables the UPS to operate as an IP managed device.

The unit requires only 4U of rack space in a standard rack enclosure and can be installed in a 2-post rack using the 2POSTRMKITHD accessory, or in a tower

configuration with the 2-9USTAND accessory.

The SU6000RT4U comes with$250,000 Ultimate Lifetime Insurance(U.S., Canada, and Puerto Rico only) for connected equipment.

Features

True on-line, double-conversion UPS provides pure, full-time sine wave AC output free of surges, voltage fluctuations and line noise

6000VA/4200 watt output power capacity with dual voltage output of 208/120 or 240/120V

4U all-in-one high power density housing supports rackmount installation in only 4 rack spaces

Dual conversion UPS actively converts raw input from AC to DC, then back to perfect sine wave AC output with enhanced protection from harmonic

distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types

Input cord and outlets are mounted on a detachable backplate with manual bypass switch to enable hot-swappable UPS replacement without powering off

connected equipment

Optional SUPDMB568HW installable backplate accessories enable hardwire input-output connections

Provides perfectly regulated, sine wave output power free of line noise, transient surges and frequency variation for the most efficient operation of critical

servers, networking and telecommunications equipment

Maintains output within 3% of selected 208/120 or 240/120V nominal voltage during brownouts and overvoltages

Supports connected equipment during blackouts for 20/8 minutes at half/full load levels, runtime is further expandable with optional external battery packs

Intelligent battery management system extends battery life

Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software(see manual)

Network interfaces support simultaneous communications via DB9 port, USB port and slot for network management card options, such as Tripp Lite's

SNMPWEBCARD

Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number

of additional servers over IP

Communications ports support on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery

capacity, AC line frequency, timed inverter shutoff, activate self-test and output power control

Includes USB and DB9 serial ports. Built-in DB9 port offers both enhanced RS-232 enabled monitoring data, plus contact closure monitoring ability.

HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X.

Built-in Emergency Power Off(EPO) interface with cable

Includes 12 built-in output receptacles(2 L6-30R, 2 L6-20R, 8 NEMA 5-15/20R)

L14-30P split phase, 4 wire plug-in connection(featured on included detachable PDU).

Front panel LEDs and LCD readout with scroll button enables visual confirmation of all major UPS functions and current site electrical conditions

Front panel switches enable power on/off control, self-test and alarm cancel functions

Included adjustable mounting rails support installation in 4 post 19 inch rack enclosures

Optional 2-9USTAND set of tower stands supports upright tower installation

Optional 2POSTRMKITHD accessory enables 2 post rackmount installation

UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user is required

Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions

Detachable PDU with built-in manual bypass switch enables hot-swappable UPS replacement without powering off connected equipment

$250,000 Ultimate Lifetime Insurance(U.S., Canada, and Puerto Rico only)