Tripp-Lite SU5000RT4UHV Catalog Page

SmartOnline 208/240V 5kVA 4.5kW

Highlights

5kVA / 5000VA / 4500W on-line

double-conversion UPS; 0.9

power factor

200/208/220/230/240V 50/60Hz

output; high efficiency economy

mode option

4U Rack/Tower compatible;

Hot-swappable batteries

USB, RS232 & EPO ports; Slot

for network management card

options

Front panel LEDs with detailed

LCD monitoring and control

screen

Expandable runtime with optional

external battery packs

NEMA L6-30P input (3 wire);

L6-30R & L6-20R outputs

Package Includes

SU5000RT4UHV UPS System

4 post rackmount rails

PowerAlert software and

complete cabling

Double-Conversion UPS, 4U Rack/Tower, Extended
Run, Network Card Options, USB, DB9 Serial

MODEL NUMBER: SU5000RT4UHV

Description

Tripp Lite SU5000RT4UHV 5000VA / 5kVA / 4500 watt on-line, double-conversion UPS system offers complete

power protection for critical server, network and telecommunications equipment in a single 4U rack/tower

compatible housing. Full-time active power conditioning provides clean, continuous dual-conversion AC output

free of voltage fluctuations, power interruptions and line noise. Fault-tolerant auto-bypass prevents unexpected

service interruptions during UPS overload or internal fault conditions. Single all-in-one rack / tower housing

installs in only 4 rack spaces(4U) with a maximum installed depth of only 20.7 in. / 52.6 cm. Maintains full-time sine wave output within 2% of selectable

200/208/220/230/240V nominal during brownouts as low 100V and overvoltages as high as 300V. Expandable runtime is supported with optional

BP192V12-3U external battery packs. Battery independent restart ensures automatic UPS power-up without user interaction after lengthy power outages,

even when batteries are expired and require replacement. Double-conversion operation converts raw input from AC to DC, then resynthesizes output power

back to perfect sine wave AC with enhanced protection from harmonic distortion, fast electrical impulses and other hard-to-solve power problems not

addressed by other UPS types. Highly efficient operation in optional economy mode significantly reduces BTU heat output and operating energy costs.

Network-grade AC surge and noise suppression. Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via built-in

RS-232 and USB interfaces. Optional network management and contact-closure communications card accessories available. HID-compliant USB interface

enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Included PowerAlert monitoring software offers

detailed site power and UPS updates with support for safe auto-shutdown of connected systems as UPS batteries become depleted. Included software

packages include PowerAlert Local, PowerAlert Network Shutdown Agent and PowerAlert Network Management System for complete support for a wide

variety of application types. Supports Emergency Power Off(EPO) via built-in interface. Front panel LEDs and LCD readout with scroll controls support

front-panel visual monitoring of all major UPS for a variety of control options to support advanced UPS settings and configurations. LED / LCD display panel

rotates for viewing in rackmount or tower configurations. L6-30P input, plus two L6-30R and two L6-20R outlets. External battery packs are field replaceable

and hot swappable.$250,000 connected equipment insurance;

Features

Tripp Lite SU5000RT4UHV 5000VA / 5kVA / 4500 watt on-line, double-conversion UPS system in a single 4U rack/tower compatible housing

Full-time active power conditioning maintains clean, continuous dual-conversion AC output free of voltage fluctuations, power interruptions and line noise

Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions

L6-30P input plug; 2 L6-30R and 2 L6-20R UPS supported outlets

Included rail kit supports 4U 19 inch rackmount installation in 4 post racks

Optional 2POSTRMKITHD supports installation in 2 post 19 inch racks(1 required for SU5000RT4UHV)

Optional 2-9USTAND supports upright tower placement(1 required for SU5000RT4UHV)

Maximum installed rack depth of only 20.7 in. / 52.6cm inches

Maintains full-time sine wave output within 2% of selected 200/208/220/230/240V nominal in double conversion mode

Corrects brownouts to 156V at full load(100V at 50% load or less)

Corrects overvoltages to 290V at full load(300V at 90% load or less)

Supports 50/60Hz operation for worldwide frequency compatibility

Double-conversion operation offers full-time AC to DC, then DC to AC conversion to maintain perfectly regulated sine wave AC output with enhanced

protection from harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types

High efficiency ECONOMY MODE operation significantly reduces BTU heat output and operating energy costs

Network-grade AC surge and noise suppression

Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via built-in RS-232, USB and optional network

management card interfaces

UPS card slot supports network management card accessory options

Optional SNMPWEBCARD offers communications and control via secure remote web and network interfaces

Optional RELAYIOCARD supports six configurable hard contact closure outputs for custom event notification

Optional RELAYIOMINI interface module offers three configurable hard contact closure outputs for custom event notification(requires removal of USB

interface module)

HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X

Includes Free PowerAlert monitoring software packages; PowerAlert LOCAL for desktops and small business networks, PowerAlert NSA(Network

Shutdown Agent) for larger networks and PowerAlert NMS(Network Management System) for monitoring up to 250 SNMP-enabled UPS, PDU and other

networking devices

Front panel LEDs and LCD readout with scroll controls support front-panel visual monitoring of all major UPS functions with support for a variety of control

options to support advanced UPS settings and configurations

LED/LCD display panel rotates for viewing in rackmount or tower configurations Supports Emergency Power Off(EPO) via built-in interface

Battery independent restart ensures automatic UPS power-up without user interaction after lengthy power outages, even when batteries are expired and

require replacement

BP192V12-3U external battery packs are field replaceable and hot swappable

Intelligent battery management system with temperature-compensated charging extends battery life

Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software(see manual)

Frequency conversion mode enables conversion of 60Hz to 50Hz or 50Hz to 60Hz(no de-rating)

$250,000 connected equipment insurance

Specifications

OUTPUT

Output Volt Amp Capacity (VA) 5000

Output kVA Capacity (kVA) 5.0

Output Watt Capacity (Watts) 4500