Tripp Lite SU5000RT3U User Manual

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +[phone]

E-mail: [e-mail]

Model #: SU5000RT3U

SmartOnline Expandable Rack / Tower UPS System - Online, double-conversion protection for mission critical
applications

Highlights

5000VA online 7U rack / tower UPS (3U Power Module + 2U Transformer

Module + 2U Battery Pack)

Zero transfer time, on-line, double-conversion and economy-mode operation

supported

Enhanced serial communications ports, SNMP/Web card slot and EPO jack

Maintains 208V - PLUS 120V output +/-2% during brownouts to 156 and

overvoltages to 276V

Expandable runtime with optional external battery packs

$250,000 Ultimate Lifetime Insurance (USA, Puerto Rico & Canada only)

Description

Tripp Lite 5kVA Smart Online RM UPS. 5000VA on-line, double-conversion UPS for server, network and telecommunications equipment. Maintains

battery-derived AC output during blackouts with active, full-time power conditioning. Fault-tolerant auto-bypass prevents unexpected service

interruptions during overload or internal fault conditions. 3U power module, 2U transformer module and 2U battery pack install in 7 rack spaces.

Full-time sine wave output within 2% of selectable 208V and simultaneous 120V AC. Corrects brownouts to 156V and overvoltages to 276V.

Frequency regulation locks output power to 50/60Hz (+/-0.2%). Expandable runtime with optional rackmount external battery packs. Dual-conversion

UPS converts raw input from AC to DC, then back to perfect sine wave AC output with enhanced protection from harmonic distortion, fast electrical

impulses and other hard-to-solve power problems not addressed by other UPS types. Highly efficient operation in optional economy mode setting,

saving BTU heat output and energy costs. Network-grade AC surge and noise suppression. Network management interfaces include 2 DB9 ports

and SNMPWEBCARD slot. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3

network interfaces. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Front panel LEDs and

LCD readout with scroll controls support visual monitoring of all major UPS functions. Audible alarm. Self test. 4-post rackmount accessories

included; 2-9USTAND and 2POSTRMKITWM accessories available. L6-30P plug-in connection; built-in output receptacles include two L6-30R, two

L6-20R and twelve 5-15/20R. Power Distribution Unit (PDU) options supported. Field-replaceable, hot-swappable external battery packs. Attractive

all-black color scheme. 2-year warranty and $250,000 connected equipment insurance; extended warranty and service contracts available.

Applications

Ideal for protection of sensitive electronics in any application calling for upright tower or 19 inch rackmount UPS protection. Common
applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems

Package Includes

SU5000RT3U system includes one 3U power module, one 2U step-down isolation transformer module and one 2U external battery module
PowerAlert UPS management software and complete cabling
Mounting hardware to support each module in 4-post rackmount enclosures
Warranty information
Instruction manual

Features

True online, double-conversion UPS provides pure, full-time sine wave AC output free of surges, voltage fluctuations and line noise
5000VA/3500 watt output power capacity with dual high/low voltage output compatible with 200-240V and 120V applications simultaneously
3U power module, 2U transformer module and 2U battery pack installs in any 19 inch rack enclosure using only 7 rack spaces
Dual conversion UPS actively converts raw input from AC to DC, then back to perfect sine wave AC output with enhanced protection from
harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types
Provides perfectly regulated, sine wave output power free of line noise, transient surges and frequency variation for the most efficient
operation of critical servers, networking and telecommunications equipment
Accepts input voltages between 156 and 276, regulating output within 2% of 208 - plus 120V nominal voltage
Supports connected equipment during blackouts for 20/8 minutes at half/full load levels, runtime is further expandable with optional external
battery packs
Network interfaces support simultaneous communications via 2 DB9 ports and SNMPWEBCARD slot
Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus
any number of additional servers over IP
Communications ports support on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge
current, battery capacity, AC line frequency, timed inverter shutoff, activate self-test and output power control
Built-in Emergency Power Off (EPO) interface with cable
Includes 17 built-in output receptacles (3 L6-30R w/one L6-30R used for transformer connection, 2 L6-20R, 12 NEMA 5-15/20R)
L6-30P input plug-in connection
Front panel LEDs and LCD readout with scroll button enables visual confirmation of all major UPS functions and current site electrical
conditions
Front panel switches enable power on/off control, self-test and alarm cancel functions
Included adjustable mounting rails support installation in 4 post 19 inch rack enclosures, optional 2POSTRMKITWM supports 2 post
rackmount installation
UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user is required
Fault-tolerant auto-bypass maintains continuous utility output to connected equipment, even in cases where the UPS is overloaded or
suffers an internal failure that requires service
2 year manufacturer's product warranty, $250,000 Ultimate Lifetime Insurance (USA & Canada only)

Specifications

SYSTEM OVERVIEW

Voltage compatibility 208V AC

Frequency
compatibility

50/60Hz

OUTPUT

Output VA 5000

Output watts 3500

Output nominal
voltage

208V & 120V AC

Output voltage
regulation

Maintains pure sine wave output at all times, regulated within 2% of selected nominal output voltage, less than 5% total
harmonic distortion

Output frequency
regulation

Regulates line frequency to 50/60Hz +/- 0.05Hz

Outlet quantity / type 2 NEMA L6-30R, 2 NEMA L6-20R, 12 NEMA 5-15/20R

Overload protection Resettable circuit breaker

INPUT

Maximum input amps 24A 208V / 21A 240V

Input connection type NEMA L6-30P

Input cord length 10 ft / 3 m

Recommended
Electrical Service

30A

BATTERY

Full load runtime 8 minutes (5000VA / 3500 watts)

Half load runtime 20 minutes (2500VA / 1750 watts)