Tripp-Lite SU40K Catalog Page

SmartOnline 40kVA Modular 3-Phase UPS System,

Highlights

40,000 VA (40kVA) tower UPS

with 2 hot-swappable power

modules

N+1 redundant modular

architecture helps assure 100%

availability

1+1 parallel capability allows for

system redundancy or increased

capacity

Low THDi saves installation costs

by permitting 1:1 generator sizing

3-phase hardwire

(120/208VAC)input/output. Wide

input voltage correction range

(94-150V AC/163-260V AC)

On-line, double-conversion

operation with zero transfer time;

IGBT technology; extremely

efficient operation (up to 96%)

Runtime is expandable via

external battery cabinet options

Package Includes

SU40K UPS System

PowerAlert Software and cabling

Parallel cable (for 1+1 operation)

Instruction manual and startup

checklist

Warranty information

On-line Double-Conversion UPS for North America

MODEL NUMBER: SU40K

Description

Tripp Lite's SU40K(40kVA) SmartOnline Modular 3-Phase Intelligent, True On-Line UPS System provides 100%

system availability with N+1 modular architecture and 1+1 parallel capability. In an N+1 configuration, the SU40K

provides two self-contained, redundant 20kVA power modules that can be hot-swapped(with the load powered) if

maintenance is required. Connect two SU40K models in parallel(1+1 configuration) to provide fail-safe

redundancy(two 40kVA models supporting a 40kVA load) or to increase capacity(two 40kVA models supporting

an 80kVA load). The SU40K provides mission-critical equipment with the highest level of power protection

available. Large capacity 40,000VA/32,000W UPS continually converts incoming AC power into filtered DC

power, and then resynthesizes it back into AC power with a pure sine wave. Perfectly regulated, continuous sine

wave output with zero transfer time assures compatibility with all equipment types. The SU40K's high input power

factor, advanced IGBT inverter technology and Digital Signal Processor(DSP) technology produce less than 3%

input Total Harmonic Distortion(THDi). With low THDi, generators run cooler and last longer, allowing managers

to save installation costs by installing a generator with a capacity equal to the equipment load(1:1 ratio).

Extremely efficient operation(up to 96%) saves money by lowering electricity consumption. Hardwire input and output connections support a variety of

permanent or PDU-style power connections. The SU40K features 120/208V AC, 3-phase, 4-wire(plus ground), wye input and output. It also features a wide

input voltage correction range: 94-150/163-260V AC. Frequency is 50 or 60 Hz(auto-selectable). The SU40K combines internal power and battery components

in a single small-footprint tower module. Typical half-load/full-load runtimes are 13 min./5.5 min. Battery runtime can be extended with optional stand-alone

hardwired external battery modules BP480V26B and BP480V40C with matching battery cabinets, available separately. Additional battery cabinets for extended

runtime solutions also available; contact Tripp Lite for more information. A manual bypass breaker and an automatic bypass function ensure 100% availability

of connected equipment by safely passing through AC power if the UPS requires maintenance. A built-in RS-232 communication port works with included

PowerAlert Software to provide shutdown commands and reporting on a single server. An accessory slot accepts an optional internal SNMPWEBCARD for

remote shutdowns, reboots and more. Front panel combination LCD/LED display alerts users to a variety of UPS operational modes and conditions. The LCD

display includes a real-time event log screen with up to 500 events listed. A dynamic battery management screen optimizes battery function to lengthen

service life and allows cold restart of the UPS during a prolonged blackout to utilize its batteries for periodic system access or data retrieval. An Emergency

Power Off button turns the UPS output OFF and disables Bypass output. Built-in Emergency Power Off(EPO) dry-contact interface supports remote

emergency shutdown in large facilities. A start-up service program is recommended to enhance the reliability of the installation.

Features

N+1 configuration: two self-contained, redundant 20kVA power modules can be hot-swapped with the load powered if maintenance is required

1+1 configuration: two SU40K models connected in parallel provide fail-safe redundancy or increased capacity

High input power factor, advanced IGBT inverter technology and Digital Signal Processor(DSP) technology produce low input Total Harmonic

Distortion(THDi)

Low THDi(less than 3%) saves installation costs by allowing 1:1 generator sizing

Extremely efficient operation(up to 96%) saves money by lowering electricity consumption

True on-line, double conversion UPS with IGBT technology provides pure sine wave AC output at all times

Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time

Removes harmonic distortion, electrical impulses, frequency variations and other hard-to-solve power problems

40,000VA/32,000W power capacity with 3-phase, hardwire 120/208VAC input/output connections

Features a wide input voltage correction range: 94-150/163-260VAC

Precision +/-1% output voltage regulation

Internal power and battery components are combined in a single small-footprint tower module. Typical half-load/full-load runtimes are 13 min./5.5 min.

Battery runtime can be extended with optional stand-alone hardwired external battery modules(Models BP480V26B and BP480V40C) with matching

battery cabinets, available separately from Tripp Lite

Additional battery cabinets for extended runtime solutions also available; contact Tripp Lite for more information

Front panel combination LCD/LED display includes a real-time event log screen with up to 500 events listed

Dynamic battery management screen optimizes battery function to lengthen service life and allow cold restart of the UPS

Built-in RS-232 communication port works with included PowerAlert Software to provide shutdown commands and reporting on a single server

Accessory slot accepts an optional internal SNMP card(Model: SNMPWEBCARD) for remote shutdowns, reboots and more

Emergency Power Off button turns UPS output OFF and disables Bypass output

Built-in Emergency Power Off(EPO) dry-contact interface supports remote emergency shutdown in large facilities

Start-up service program is recommended to enhance the reliability of the installation

Specifications

OUTPUT

Output Volt Amp Capacity (VA) 40000

Output kVA Capacity (kVA) 40

Output Watt Capacity (Watts) 32000

Output kW Capacity (kW) 32

Power Factor 0.8

Crest Factor 3:1

Nominal Output Voltage(s)
Supported

Frequency Compatibility 50 / 60 Hz

Output Voltage Regulation (Line
Mode)

Output Voltage Regulation (Battery
Mode)

120/208V 3-PH Wye

+/- 1%

+/- 1%