Tripp Lite SmartOnline 3-Phase UPS System SU30K3/3XR5, SU20K3/3XR5, SU30K3, SU3XR5 Specifications

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +[phone]

E-mail: [e-mail]

Model #: SU30K3/3XR5

SmartOnline 30kVA On-Line Double-Conversion UPS, 3 Phase input / output with oversize battery set

Highlights

30,000 VA (30kVA) EXTENDED RUNTIME tower UPS with internal batteries

Saves valuable space and simplifies runtime scalability

3-phase hardwire input and output (120/208VAC). Wide input voltage

correction range (96 - 144V AC / 166 - 250V AC)

IGBT technology and zero transfer time, on-line, double-conversion operation

3 communication ports, SNMP card slot and EPO jack

Description

Tripp Lite's SU30K3/3XR5 30kVA SmartOnline 3-Phase Intelligent, True On-Line Extended Runtime UPS System has been redesigned to save
valuable space and simplify runtime scalability. Power and battery components are combined into a single, small-footprint module (the smallest in its
class). A robust internal battery runtime capability can be easily extended by installing additional optional internal battery packs through the
convenient front panel access door. The SU30K3/3XR5 features a large internal battery compartment that contains more internal batteries than the
equivalent standard-run model (SU30K3/3) and more space to add additional optional internal battery packs to extend runtime. The SU30K3/3XR5
provides mission critical equipment with the highest level of power protection available. Large capacity 30,000VA/24,000 watt UPS continually
converts incoming AC power into filtered DC power, and then resynthesizes it back into AC power with a pure sine wave. Perfectly regulated,
continuous sine wave output with zero transfer time offers compatibility with all equipment types. IGBT inverter technology produces output power
with <3% THD (total harmonic distortion), allowing connected equipment to perform at its peak. A 3:1 crest factor safely supports a variety of
equipment, even those with wildly-fluctuating power demands. Extremely efficient operation saves money by lowering electricity consumption.
Hardwire input and output connections support a variety of permanent or PDU style power connections. SU30K3/3XR5 features 120/208V AC,
3-phase, 4-wire (plus ground), wye input and output. It also features a wide input voltage correction range: 96 -144/166-250V AC. Frequency is 50
or 60 Hz (auto-selectable). SU30K3/3XR5 includes internal power and battery components in a single small-footprint tower module. Battery support
can be extended with additional internal battery packs. A manual bypass switch as well as an automatic bypass function ensure 100% availability of
connected equipment by safely passing through AC power when the UPS requires maintenance. Three built-in communication ports (RS-232,
contact closure and AS-400) work with included PowerAlert Software to simultaneously provide shutdown commands and reporting on multiple
servers without the need for costly accessories. An accessory slot accepts an optional internal SNMP card (model # SNMPWEBCARD) for remote
shutdowns, reboots and more. A Battery Start Switch allows cold restart of UPS during a prolonged blackout to utilize its batteries for periodic
system access or data retrieval. An Emergency Power Off button turns UPS output OFF and disables Bypass output. Built-in Emergency Power Off
(EPO) interface supports remote emergency shutdown in large facilities. Front panel combination LCD/LED display alerts users to a variety of UPS
operational modes and conditions. A start-up service program is recommended to enhance the reliability of the installation.

Package Includes

SU30K3/3XR5 UPS System (power and battery components in one module)

PowerAlert Software and cabling

Warranty information

Instruction manual

Features

Large internal battery compartment contains more internal batteries than the equivalent standard-run model (SU30K3/3) and more space to

add additional optional internal battery packs to extend runtime.Saves valuable space: power and battery components combined into a

single small-footprint module

Simplifies runtime scalability: convenient front panel battery access for expandable runtime with additional internal battery packs

True on-line, double conversion UPS with IGBT technology provides pure, sine wave AC output at all times

Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time

Removes harmonic distortion, electrical impulses, frequency variations and other hard-to-solve power problems

30,000VA/24,000 watt power capacity with 3-phase, hardwire 120/208V AC input/output connections

Features a wide input voltage correction range: 96 - 144/166 - 250V AC

61 minutes runtime at half load (11,300 watts) based on adding 3 SURBC2030 battery packs and 11 minutes runtime at full load (24,000

watts)

3:1 crest factor safely supports a variety of equipment, even those with wildly-fluctuating power demands

Extend runtime by installing optional internal battery packs (model # SURBC2030) through the front panel access door. SU30K3/3XR5

includes 5 internal battery packs and accepts 3 additional internal battery packs. A standalone battery module compartment with a 4 battery

pack capacity and daisy-chain capability (model # SUBF2030) is available to further extend runtime.

3 communication ports (RS-232, contact closure and AS-400)

Slot for optional SNMP card (model # SNMPWEBCARD)

Manual bypass switch as well as an automatic bypass function ensures 100% availability of connected equipment by safely passing

through AC power when the UPS system requires maintenance

Battery Start Switch allows cold restart of UPS during a prolonged blackout to utilize its batteries for periodic system access or data retrieval

Emergency Power Off button turns UPS output OFF and disables Bypass output

PowerAlert Universal UPS Power Management Software and 6 ft. communication cable included

Built-in Emergency Power Off (EPO) interface supports remote emergency shutdown in large facilities

Combination LED/LCD display

Start-up service program is recommended to enhance the reliability of the installation

Specifications

OUTPUT

Output Volt Amp
Capacity (VA)

30000

Output kVA
capacity (kVA)

30

Output Watt
Capacity (watts)

24000

Output kW capacity 24

Output power factor 0.8

Crest Factor 3:1

Nominal Output
Voltage(s)
Supported

120/208V; 3-Phase Wye

Frequency
compatibility

50 / 60 Hz

Output voltage
regulation (line
mode)

+/- 2%

Output voltage
regulation (Battery
mode)

+/- 2%

Built-in UPS output
receptacles

Hardwire

Output AC
waveform (AC
mode)

Sine wave

Output AC
waveform (battery
mode)

Pure Sine wave

INPUT

Rated input current
(at maximum load)

90A (per phase, online)